CARRYGOLF LEOPARD Manuel utilisateur
carrygolf
carrygolf.net
1
INSTRUCTIONS: CARRYGOLF LEOPARD
LEOPARD
carrygolf
carrygolf.net
2
CONTENTS
1. In The Box
2. Assembly Instructions
3. Control Panel Functions
4. Driving With Remote Control
5. How To Manage Without Remote Control
6. Battery
7. Electric Brake. "Brake System"
8. Driving Without Electric Motor
9. Maintenance
10. Transport
11. Technical Service
12. Warranty
carrygolf
carrygolf.net
3
INSTRUCTIONS: CARRYGOLF - LEOPARD
Please read and follow these instructions carefully and your cart will be
ready to run in minutes.
carrygolf
carrygolf.net
4
BOX CONTENTS
A) Metal frame and motor.
B) 2 wheels, rims and rear tires.
C) 24 V Lithium battery with box.
D) Battery Charger.
E) three additional quick clamping gums.
F) Remote control .
G) Anti rollover tire.
H) Wheels transport bag.
I) Battery transport bag.
J) Grass cleaning brush .
K) Card holder.
L) Support for umbrella.
M) Silicone capss to protect the car.
N) Towel to clean irons.
carrygolf
carrygolf.net
5
Figure 1
carrygolf
carrygolf.net
6
ASSEMBLY INSTRUCTIONS
Unpack all components carefully and keep the package for a reasonable
time. (Essential in case of refund)
1) Mount the wheels checking the tire tread and still points in the direction
of travel. Take as reference the tire tread of the front wheel or follow the
pattern of Figure 1 (p. 5). The wheels have left –right position.
Insert each wheel in axis, pressing the pivot located on the same wheel. The
shaft has two lace. The exterior, is intended only for use with full manual
cart, in case of a power failure, battery depletion or failure. The inner
socket, is used to engage the four Allen screws inside the wheel, into the
four holes that brings the motor, so the motor moves the wheels.
carrygolf
carrygolf.net
7
2) The anti rollover rear wheel has an anchoring(and safety) pin that shall be
pressed, for insertion or removal of its position.
3) Position and fix the horizontal arm at the desired position.
carrygolf
carrygolf.net
8
4) Install the battery in the cart and plug the power cord into the power
outlet of the motor, gently pressing the anchor pivot. (Remember that for
removal one must also press the anchoring piece)
To fit into the socket, press the pivot anchor
5) Fix the battery to the cart by a quick clamping rubber band (Photo B). The
purpose of this fixing is to avoid unnecessary wear on the painting produced
by continuous friction. At the same time, get the battery un moved in case
we detach or dump the cart.
Photo A Photo B
All rubber clamps (photo A) has an adjustment function. To work properly
tensioned, make a knot to the desired size.
.
carrygolf
carrygolf.net
9
CONTROL PANEL FUNCTIONS
3.1 ON / OFF Press for two seconds, your Carrygolf is connected or
disconnected.
3.2 LED power indicator. To verify that your car is on or off, the indicator
light provided. Remains green as available battery charge. Red when the
battery status is low.
3.3 TIMER, scheduled movement 10, 20 or 30 meters. Depending on the
number of times the button (1, 2 or 3 times) is pressed, the preset distance
Carrygolf advance 10, 20 0 30 m.
3.4 POTENCIOMETER, power regulator according to the terrain. A steeper,
will require more power.
carrygolf
carrygolf.net
10
RIDING WITH REMOTE CONTROL
The remote control is a command transmitter to the receiver installed on
the golf cart.
2 AAA batteries (1.5 V) are necessary
IMPORTANT:
For a proper carriage driving with remote control, turn your Carrygolf on
and hold down the potenciometer knob.
Strange as it may seem, the button should remain in the stop position.
The potentiometer is only used for driving without a remote control.
You may need 2 or 3 games to master, driving with remote control
Table des matières
Autres manuels CARRYGOLF Chariot de golf
