Carrier TRANSICOLD Vector 8500 Manuel utilisateur
Operator’s Manual
Vector 8500
Trailer and Rail Refrigeration Units
62-11646-00
Rev D
TM
OPERATOR’S MANUAL
For The
VECTOR 8500
Single-Temp Trailer and Rail
Refrigeration Units
© 2015 Carrier Corporation ●Printed in U. S. A. November 2015
TM
62-11646
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Unit Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Display Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Starting Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Inspect Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switching Operating State . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
IntelliSet™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Operator Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pretrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing Setpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Start-Stop / Continuous Operation . . . . . . . . . . . . . . . . . . . . 24
Data Recorder / Trip Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Manual Defrost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Unit Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Alarm List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
View Hour Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Stopping Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Emergency Bypass Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Pretrip Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Product Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Recommended Transport Temperatures . . . . . . . . . . . . . . . 41
General Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Priming Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Emergency Road Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
1 62-11646
I
NTRODUCTION
This guide has been prepared for the operator of a Carrier Transicold
Vector™ 8500 Trailer or Rail refrigeration unit with the APX™ Control System.
It contains basic instructions for the daily operation of the refrigeration unit as
well as safety information, troubleshooting tips, and other information that will
help you to deliver the load in the best possible condition. Please take the
time to read the information contained in this booklet and refer to it whenever
you have a question about the operation of this Carrier Transicold unit.
This refrigeration unit has been engineered to provide long, trouble-free
performance when it is properly operated and maintained. The checks
outlined in this guide will help to minimize over-the-road problems. In addition,
a comprehensive maintenance program will help to insure that the unit
continues to operate reliably. Such a maintenance program will also help to
control operating costs, increase the unit's working life, and improve
performance.
This guide is intended as an introduction to this unit and to provide general
assistance when needed. More comprehensive information can be found in
the Operation and Service manual for this unit. This manual can be obtained
from your Carrier Transicold dealer.
When having this unit serviced, be sure to specify genuine Carrier Transicold
replacement parts for the highest quality and best reliability.
At Carrier Transicold, we are continually working to improve the products that
we build for our customers. As a result, specifications may change without
notice.
62-11646 2
U
NIT
I
DENTIFICATION
Each unit is identified by a decal attached to the frame of the unit inside the
roadside side door. This decal is on the bottom vertical frame next to the
display. The decal identifies the model number of the unit, the warranty ID
number, the serial number, the type of refrigerant and refrigerant charge.
If a concern arises, please refer to the information on this decal, and make a
note of the model and serial number before calling for assistance. This
information will be needed when you contact an authorized Carrier Transicold
Dealer so that they may properly assist you.
Nameplate
Model Name:
Serial No:
Model No:
Warranty ID:
Refrigerant:
Standby:
Max. Op. Press.
VECTOR 8500
PAJ########
NDK537##-##-#
######
R404A 14 Lbs.
LP: 100psig/HP: 465psig
Athens Ga.
YEAR
456
789
10 11 12
123 2011
2012
2013
2014
DAY
Made in the United States of America
123456789
10 11
12 13 14 15 16 17 18 19 20 21
324225 26 27 28 29 30
22
31
Manufacturer’s Warranty Statement:
See dealer for warranty coverage
details.
MONTH
DATE IN SERVICE
(Sample)
3 62-11646
S
AFETY
WARNING
!
Unit may start automatically at any time even if the switch is
in the OFF position. Use proper lockout/tagout procedures
before inspection/servicing. All unit inspection/servicing by
properly trained personnel only.
WARNING
!
Be aware of HIGH VOLTAGE supplied at the power plug or
from the generator. When performing service or maintenance
procedures: ensure the START/RUN-OFF switch is in the OFF
position, lockout/tagout the high voltage receptacle, and
lockout/tagout the negative battery connection.
This Carrier Transicold refrigeration unit has been designed with the safety of
the operator in mind. During normal operation, all moving parts are fully
enclosed to help prevent injury. During any inspection or servicing with the
doors open you may be exposed to moving parts; please stay clear of all
moving parts when the unit is in operation.
NOTE TO TECHNICIANS
Refer to the Operation and Service manual for a complete list
of safety precautions.
62-11646 4
S
AFETY
- C
ONTINUED
Auto-Start
This unit is equipped with Auto-Start in Start-Stop and Continuous Operation.
The unit may start at any time. A buzzer will sound for five seconds before the
unit is started. When performing any check of the refrigeration unit (e.g.,
visually checking the belt, oil, or coolant), place unit in Inspect mode, unplug
the high voltage connector, and disconnect the starter solenoid connector.
Cooling System
The engine is equipped with a pressurized cooling system including a
pressurized coolant bottle. Under normal operating conditions, the coolant in
the engine and radiator is under high pressure and is very hot. Contact with
hot coolant can cause severe burns. Do not remove the cap from a hot
coolant system; if cap must be removed, cover it with a rag and remove very
slowly in order to release the pressure without spray.
Refrigerant
The refrigerant contained in the refrigeration system of this unit can cause
frostbite, severe burns, or blindness when in direct contact with the skin or
eyes. For this reason (and because of legislation regarding the handling of
refrigerants) we recommend that you contact your nearest Carrier Transicold
authorized repair facility whenever service of the refrigerant system is
required.
Battery
This unit may be equipped with a lead-acid type battery. The battery normally
vents small amounts of flammable hydrogen gas. Do not smoke when
checking the battery. A battery explosion can cause serious physical harm
and/or blindness.
Autres manuels pour Vector 8500
1
Table des matières
