Carmanah SpeedCheck-15 Manuel utilisateur

SpeedCheck®

EXTERNAL RADAR KIT INSTALL GUIDE

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com

For the SPEEDCHECK-15/18 radar speed signs

89837_INSTALL-GUIDE_SPEEDCHECK-15-18-External-Radar-Kit_RevA

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 2

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

TABLE OF CONTENTS

Table of Contents

1.0 Warnings and Precautions ................................................................................................................................3

1.1 Warranty Disclaimer ...................................................................................................................................3

1.2 Standards ...................................................................................................................................................3

1.3 Safety and Usage Precautions ...................................................................................................................3

2.0 Overview..............................................................................................................................................................4

3.0 Installation...........................................................................................................................................................6

3.1 Determine Installation Location on Pole .....................................................................................................6

3.2 Install SpeedCheck Sign and Cabinet ........................................................................................................6

3.3 Drill Holes for Radar Cable and Mount Through Bolts ...............................................................................7

3.4 Fish Radar Cable, Install Radar & Mount to Pole.......................................................................................8

3.5 Aim Radar Module ......................................................................................................................................8

3.6 Connect Radar Harness .......................................................................................................................... 10

4.0 Maintenance and Product Care...................................................................................................................... 10

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 3

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

1.0 WARNINGS AND PRECAUTIONS

1.0 Warnings and Precautions

The following symbols indicate important safety warnings and precautions throughout this manual:

WARNING indicates that serious bodily harm or death may result from failure to adhere to the

precautions.

CAUTION indicates that damage to equipment may result if the instructions are not followed.

NOTE suggests optimal conditions and provides additional information.

1.1 Warranty Disclaimer

This manual will familiarize you with the installation of Carmanah's SPEEDCHECK-15/18 External Radar Kit.

Failure to comply with the use, storage, maintenance, installation or placement instructions detailed in this manual

could void the warranty.

1.2 Standards

Perform all installation, wiring, grounding and maintenance in conformance with local building and electrical

codes. Adherence to the National Electrical Code (NEC) is mandatory to comply with any certification markings.

Non-adherence to code may void the warranty.

1.3 Safety and Usage Precautions

Ensure the equipment is not powered during installation and wiring of the system. Recheck all

completed wiring for proper polarity prior to energizing the system.

Perform all installation, wiring, grounding and maintenance in conformance with local building

and electrical codes. Adherence to the National Electrical Code (NEC) is mandatory to comply

with any certification markings. Non-adherence to code may void the warranty.

Changes or modifications to Carmanah equipment not expressly approved by Carmanah could

void both the user's authority to operate the equipment and the warranty.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 4

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

2.0 OVERVIEW

2.0 Overview

The standard Carmanah SPEEDCHECK-15/18 radar speed signs feature a radar module integrated within the

sign enclosure. With the External Radar Kit option, users can mount the radar module externally from the sign

enclosure. The ability to aim the sign and radar module independently of one another can be beneficial for some

applications. The radar module and sign are each supplied with a cable terminated with a connector.

The SPEEDCHECK-15/18 External Radar Kit’s components are shown and described below:

Radar mount: side of pole

mount for radar module.

Can be through-bolted or

banded to pole.

Radar module: communicates vehicle speeds to

the SpeedCheck speed display. Equipped with

sealed M12 harness that mates with sign harness.

Connectors: sealed

connectors on radar

and SpeedCheck.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 5

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

2.0 OVERVIEW

The connectors on the radar cables are sealed and UV-resistant. For SPEEDCHECK-15 signs

without the separate power cabinet, the radar cable connection can be left in the pole, in conduit,

or outside the pole as required.

Sign power cable

(2-cond. red/black)

External radar

module & mount

assembly

Power cabinet

(solar or AC)

Radar output cable,

from radar module

SpeedCheck

radar speed sign

Radar input cable,

to SpeedCheck sign

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 6

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

3.0 INSTALLATION

3.0 Installation

The following tools and materials may be required to mount the External Radar Kit:

a. Drill and drill bits

b. Socket set

c. Screwdriver

d. Fish tape

The following is a summary of the installation sequence of the External Radar Kit:

1. Determine installation location on pole for radar module, radar speed sign and cabinet

2. Install radar speed sign and cabinet per supplied instructions

3. Drill holes for radar cable and mount through bolts, if required

4. Fish radar cables, install radar and mount to pole

5. Aim radar module

6. Connect radar harness and power on system

3.1 Determine Installation Location on Pole

The radar module should be mounted on the pole so that its front face directly faces and has an unobstructed

view of oncoming traffic. The cable on the radar module protrudes approximately 8 ft (2.4 m) beyond where it

enters the pole. The SpeedCheck sign radar cable protrudes approximately 7 ft (2.1 m) from its junction box. It is

recommended that the radar cables be routed into the cabinet and mated.

For optimal radar performance:

•For maximum range, mount radar at least 6 ft (1.9 m) above the ground

•Minimize the angle between target traffic and the radar module

3.2 Install SpeedCheck Sign and Cabinet

Use the instructions supplied with your system to install the SpeedCheck sign and power cabinet. Wrap the

circular connector on the sign’s radar input cable with tape to protect it from debris and fish it from the sign to the

cabinet, along with the sign’s 2-conductor power cable.

If the radar module can’t be located near the side of the road, it may need to be pointed further up

the road to detect vehicles effectively.

The connectors on the radar cables are sealed and UV-resistant. For SPEEDCHECK-15 signs

without the separate power cabinet, the radar cable connection can be left in the pole, in conduit,

or outside the pole as required.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 7

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

3.0 INSTALLATION

3.3 Drill Holes for Radar Cable and Mount Through Bolts

If routing the radar cable inside the pole (recommended), drill a 5/8” hole (16 mm) in the center of where the radar

mount will attach to the pole. If through-bolting the radar mount, also drill two 7/16” (11 mm) holes above and

below as shown through both sides of the pole.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 8

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

3.0 INSTALLATION

3.4 Fish Radar Cable, Install Radar & Mount to Pole

Install the radar module into the mount saddle with the cable facing down and fasten with the supplied spacers,

washers and screws as shown. Install the washers metal side out against the underside of the screw heads. Tape

the radar connector to protect it from debris and fish the cable through the mount, into the pole and up or down to

the cabinet. Bolt or band the radar mount to the pole.

Install the radar module with its cable facing down to optimize both detection range and

resistance to water ingress.

The radar module is a snug fit within the mount saddle. The mount saddle can be pulled apart

slightly to allow the radar module to fit within it.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 9

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

3.0 INSTALLATION

3.5 Aim Radar Module

Adjust the radar tilt and pan so its front face points directly at oncoming traffic. For additional aiming guidance,

see the SPEEDCHECK-15/18 User Manual at support.carmanah.com. Tighten the hardware firmly to lock it in

place.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com | carmanah.com 10

SPEEDCHECK-15/18 EXTERNAL RADAR KIT

4.0 MAINTENANCE AND PRODUCT CARE

3.6 Connect Radar Harness

Align and mate the connectors on the radar cables. Turn the barrel firmly clockwise to lock the connectors

together. Ensure that the rest of the system installation is complete, and power the system on as described in the

SPEEDCHECK-15/18 User Manual.

4.0 Maintenance and Product Care

The External Radar Kit is designed to operate reliably for years with virtually no need for maintenance. Carmanah

recommends routine inspections to ensure that the radar module and the connected SPEEDCHECK-15/18

system is unobstructed by anything that may prevent effective performance, including:

•Dirt and dust

•Snow

•Leaves

•Debris

•Shade that may have developed after installation due to adjacent plant growth.

The frequency of the inspections depends on location and local weather patterns. A yearly visual inspection of the

system is typically enough. The system is designed to be maintenance free, but maximum system performance is

achieved when the sign window, radar module and solar panels are clean.

Autres manuels pour SpeedCheck-15

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Carmanah Radar

Carmanah

Carmanah MX Series Manuel utilisateur

Carmanah

Carmanah SpeedCheck-15 Manuel de la liste des pièces

Carmanah

Carmanah SPEEDCHECK Series Manuel utilisateur

Carmanah

Carmanah SpeedCheck-15 Manuel de la liste des pièces

Carmanah

Carmanah G Series Manuel de la liste des pièces

Carmanah

Carmanah SpeedCheck-15 Manuel utilisateur

Carmanah

Carmanah SPEEDCHECK-12 Manuel utilisateur

Carmanah

Carmanah SPEEDCHECK 15 Manuel utilisateur

Carmanah

Carmanah SpeedCheck-15 Manuel utilisateur

Carmanah

Carmanah SpeedCheck 12 Manuel utilisateur

Carmanah

Carmanah SpeedCheck-15 Manuel utilisateur

Carmanah

Carmanah SpeedCheck-18 Manuel de la liste des pièces

Carmanah

Carmanah SPEEDCHECK Manuel de la liste des pièces

Carmanah

Carmanah SpeedCheck-15 Manuel utilisateur

Carmanah

Carmanah E Series Manuel utilisateur

Carmanah

Carmanah SpeedCheck 12 Manuel utilisateur

Manuels Radar populaires d'autres marques

SAW D2L

SAW D2L Valentine One Gen2 Manuel utilisateur

Raymarine

Raymarine Raytheon R20X Manuel utilisateur

Simrad

Simrad CA34 Manuel utilisateur

Endress+Hauser

Endress+Hauser Micropilot FMR67B Caractéristiques techniques

Endress+Hauser

Endress+Hauser Levelflex M FMP45 Manuel utilisateur

ECHOMAX

ECHOMAX Active-X-Band Manuel utilisateur

AGD

AGD 340 Manuel utilisateur

Kustom Signals

Kustom Signals Eagle 3 Manuel utilisateur

SYMEO

SYMEO STU Manuel utilisateur

Axis

Axis D2110-VE Manuel utilisateur

MALA

MALA MIRA Manuel utilisateur

Emerson

Emerson ROSEMOUNT 5300 Manuel utilisateur

Rosemount

Rosemount 5300 Series Manuel utilisateur

Endress+Hauser

Endress+Hauser Levelflex FMP56 Caractéristiques techniques

TERMA

TERMA SCANTER 5102 Manuel utilisateur

GSSI

GSSI UtilityScan Manuel utilisateur

Acconeer

Acconeer A111 Manuel utilisateur

Crosley

Crosley CR37 Manuel utilisateur