Carbatec GR-S200P Manuel utilisateur
GR-S200P MANUAL
8” Low Speed
750W Bench Grinder
CARBATEC.COM.AU
FOR TECHNICAL SUPPORT CALL 1800 658 111
GR-S200P
THANK YOU
FOR CHOOSING
Carbatec has been a trusted brand for woodworking enthusiasts
and professionals across Australia and New Zealand, since 1987.
Our quality woodworking products are designed and built to oer
value and performance, making the latest features and technological
advancements more accessible to Aussie woodworkers.
Backed by our no-fuss after-sales care and warranty support,
you can trust Carbatec to keep you woodworking, as promised.
We look forward to sharing in your woodworking journey!
If you have any questions about our products or service,
Find us on social media
facebook.com/Carbatec
instagram.com/Carbatec
youtube.com/CarbaTecToolsForWood
V. 3
2
CARBATEC.COM.AU
GR-S200P WELCOME
WHAT’S IN THE BOX
This Bench Grinder will require a minimal
amount of assembly.
1. Remove parts from all of the cartons
and lay them on a clean work surface.
2. Remove any protective materials and
coatings from all of the parts and the
bench grinder. The protective coatings
can be removed by spraying WD-40
on them and wiping it o with a soft
cloth. This may need to be redone
several times before all of the protective
coatings are removed completely.
!
CAUTION: DO NOT use acetone,
gasoline or lacquer thinner to remove
any protective coatings.
3. Compare the items to Figure C; verify
that all items are accounted for before
discarding the shipping box.
!
If any parts are missing, do not attempt to
plug in the power cord and turn “ON” the
Bench Grinder. The Bench Grinder can only
be turned “ON” after all the parts have been
obtained and installed correctly.
A. Grinder
B. Tool rest & locking knob, right
C. Tool rest & locking knob, left
D. Eye shield & mounting bracket, left
E. Eye shield & mounting bracket, right
F. Spark arrestors, x2
G. Tool rest support, right
H. Tool rest support, left
The following items are provided
in the shipping box:
FIG C.
UNPACKING AND CHECKING CONTENTS
3
A
B
D
G
C
E
F FH
FOR TECHNICAL SUPPORT CALL 1800 658 111
GR-S200P
SERIAL NUMBER:
DATE OF PURCHASE:
Record the serial number and date of purchase
in your manual for future reference.
Key information can be found
on the inspection panel, found
on the rear of the machine.
Model:
Voltage
Freq:
Phase:
Amp:
kW:
Speed:
Lot No.:
Serial No:
Date:
QUALITY INSPECTED
Made in for:
CARBATEC PTY LTD
Brisbane - Australian
4
CARBATEC.COM.AU
GR-S200P
CONTENTS
Introduction 2
What’s in the box 3
Key information 4
Safety instructions - General 7-10
Safety instructions - Bench Grinders 11-12
Safety instructions - Electrical 13
Specications 14
Overview 15
Assembly 17-19
Operation 21-23
Maintenance 24
Parts diagram 26
Parts list 27
Wiring diagram 28
Troubleshooting 29-30
Warranty details 31
5
FOR TECHNICAL SUPPORT CALL 1800 658 111
GR-S200P
6
CARBATEC.COM.AU
GR-S200P
IMPORTANT! Safety is the single most important consideration in the operation of this
equipment. The following instructions must be followed at all times. Failure to follow all
instructions listed below may result in electric shock, re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that
this tool not be modied and/or used for any other application other than that for which it was
designed. If you have any questions about its application, do not use the tool until you have
contacted us and we have advised you.
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding.
The symbol warnings do not, by themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident prevention measures.
!
Be sure to read and understand all safety instructions in this manual, including all safety
alert symbols such as “DANGER,” “WARNING,” and “CAUTION” before using this tool.
Failure to following all instructions listed below may result in electric shock, re, and/or
serious personal injury.
A safety alert symbol Indicates DANGER, WARNING, or CAUTION.
May be used in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
could result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result
in property damage.
SAFETY INSTRUCTIONS
!
!
SYMBOL MEANING
!!
Carbatec products bearing the Regulatory Compliance Mark (RCM) have been tested in
accordance with applicable Australian/New Zealand Standards to ensure their compliance
with all mandatory standards and regulations (applicable at time of original sale). Carbatec
Pty Ltd are registered as a responsible supplier with relevant Australian government
departments and our products are registered on the EESS & ACMA database.
7
FOR TECHNICAL SUPPORT CALL 1800 658 111
GR-S200P
Operating a power tool can be dangerous if
safety and common sense are ignored.
The operator must be familiar with the
operation of this machine. Read this manual
to understand this machine. DO NOT operate
this machine if you do not fully understand the
limitations of this tool. DO NOT modify this
machine in any way.
BEFORE USING
THIS MACHINE
!
To avoid serious injury and damage to the
tool, read and follow all of the Safety and
Operating Instructions before operating
the machine.
!
1. Some dust created by using power tools
contains chemicals to cause cancer, birth
defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks,
cement, and other masonry
products.
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure to
these chemicals: work in a well ventilated
area and work with approved safety
equipment, such as those dust masks
that are specially designed to lter out
microscopic particles.
2. READ the entire Owner’s Manual.
LEARN how to use the tool for its
intended applications.
3. GROUND ALL TOOLS. If the tool is
supplied with a 3-prong plug, it must
be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to
ground the tool and provide protection
against accidental electric shock.
4. AVOID A DANGEROUS WORKING
ENVIRONMENT. DO NOT use electrical
tools in a damp environment or expose
them to rain.
5. DO NOT use electrical tools in the
presence of ammable liquids or gasses.
6. ALWAYS keep the work area clean, well
lit, and organized. DO NOT work in an
environment with oor surfaces that are
slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY.
DO NOT permit people to be in the
immediate work area, especially when the
electrical tool is operating.
8. DO NOT FORCE THE TOOL to perform
an operation for which it was not
designed. It will do a safer and higher
quality job by only performing operations
for which the tool was intended.
GENERAL SAFETY
8
CARBATEC.COM.AU
GR-S200P
9. WEAR PROPER CLOTHING.
DO NOT wear loose clothing, gloves,
neckties, or jewelry. These items can
get caught in the machine during
operations and pull the operator into
the moving parts.The user must wear
a protective cover on their hair, if the
hair is long, to prevent it from contacting
any moving parts.
10. CHILDPROOF THE WORKSHOP AREA
by removing switch keys, unplugging
tools from the electrical receptacles,
and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM
THE ELECTRICAL RECEPTACLE
when making adjustments, changing
parts or performing any maintenance.
12. KEEP PROTECTIVE GUARDS IN
PLACE AND IN WORKING ORDER.
13. AVOID ACCIDENTAL STARTING. Make
sure that the power switch is in the
“OFF” position before plugging in the
power cord to the electrical receptacle.
14. REMOVE ALL MAINTENANCE TOOLS
from the immediate area prior to turning
“ON” the machine.
15. USE ONLY RECOMMENDED
ACCESSORIES. Use of incorrect or
improper accessories could cause
serious injury to the operator and cause
damage to the tool. If in doubt, check
the instruction manual that comes with
that particular accessory.
16. NEVER LEAVE A RUNNING TOOL
UNATTENDED. Turn the power switch
to the “OFF” position.
DO NOT leave the tool until it has come
to a complete stop.
17. DO NOT STAND ON A TOOL. Serious
injury could result if the tool tips over,
or you accidentally contact the tool.
18. DO NOT store anything above or near
the tool where anyone might try to stand
on the tool to reach it.
19. MAINTAIN YOUR BALANCE. DO NOT
extend yourself over the tool. Wear oil
resistant rubber soled shoes. Keep oor
clear of debris, grease, and wax.
20. MAINTAIN TOOLS WITH CARE. Always
keep tools clean and in good working
order. Keep all blades and tool bits
sharp, dress grinding wheels and change
other abrasive accessories when worn.
21. EACH AND EVERY TIME, CHECK FOR
DAMAGED PARTS PRIOR TO USING
THE TOOL. Carefully check all guards
to see that they operate properly, are not
damaged, and perform their intended
functions. Check for alignment, binding
or breaking of moving parts. A guard or
other part that is damaged should be
immediately repaired or replaced.
22. DO NOT OPERATE TOOL WHILE
TIRED, OR UNDER THE INFLUENCE
OF DRUGS, MEDICATION
OR ALCOHOL.
SAFETY INSTRUCTIONS
9
FOR TECHNICAL SUPPORT CALL 1800 658 111
GR-S200P
23. SECURE ALL WORK. Use clamps or
jigs to secure the work piece. This is
safer than attempting to hold the work
piece with your hands.
24. STAY ALERT, WATCH WHAT YOU ARE
DOING, AND USE COMMON SENSE
WHEN OPERATING A POWER TOOL.
A moment of inattention while operating
power tools may result in serious
personal injury.
25. ALWAYS WEAR A DUST MASK TO
PREVENT INHALING DANGEROUS
DUST OR AIRBORNE PARTICLES,
including wood dust, crystalline silica
dust and asbestos dust. Direct particles
away from face and body. Always
operate tool in well ventilated area
and provide for proper dust removal.
Use dust collection system wherever
possible. Exposure to the dust may
cause serious and permanent respiratory
or other injury, including silicosis (a
serious lung disease), cancer, and death.
Avoid breathing the dust, and avoid
prolonged contact with dust. Allowing
dust to get into your mouth or eyes, or
lay on your skin may promote absorption
of harmful material. Always use properly
tting AS/NZS approved respiratory
protection appropriate for the dust
exposure, and wash exposed areas with
soap and water.
26. USE A PROPER EXTENSION CORD
IN GOOD CONDITION. Use of extension
cords should be avoided where possible.
When using an extension cord, be sure
to have a cord heavy enough to carry
the current your product will draw, and
with compatible pin conguration and
connections (NEVER use an extension
cord rated at less than your machine).
Longer run extensions will need heavier
duty extension cords. Only connect
your extension cord or machine to
a receptacle that accepts your plug
and never modify your plug to suit a
receptacle.
GENERAL SAFETY
10
Table des matières
