Car Solutions Multimedia Video Interface Manuel utilisateur

Multimedia Video Interface for Mercedes-Benz

E uipped with Command NET 2.5 with SD slot

Compatible car models:

•

Mercedes-Benz A-Class (2009 manufacture year)

•

Mercedes-Benz B-Class (2009 manufacture year)

•

Mercedes-Benz CLC-Class (2009 manufacture year)

•

Mercedes-Benz CLS-Class (2009 manufacture year)

•

Mercedes-Benz CLK-Class (2009 manufacture year)

•

Mercedes-Benz G-Class (2009 manufacture year)

•

Mercedes-Benz GL-Class (2009 manufacture year)

•

Mercedes-Benz GLK-Class (2009 manufacture year)

•

Mercedes-Benz ML-Class (2009 manufacture year)

•

Mercedes-Benz R-Class (2009 manufacture year)

•

Mercedes-Benz SL-Class (2009 manufacture year)

•

Mercedes-Benz SLK-Class (2009 manufacture year)

•

Mercedes-Benz SLR-Class (2009 manufacture year)

•

Mercedes-Benz V-Class (2009 manufacture year)

his car video interface is fully compatible with monitors of the above-mentioned cars. After interface

connection all original functions of the head unit are preserved. Switching between RGB, AV1, AV2 video

sources and original image is performed via original NAVI button. Blue wire for rear view camera signal

must be connected in case of OEM rear view camera or if you need to connect aftermarket rear view

camera!

Note: All above-mentioned monitors do not have touch screens. hat is why you can purchase

6.5-inch touch screen panel (this size is for reference only, please refer to the size of your car monitor) and

also USB touch screen controller for more comfortable usage of navigation box (e.g. CS9100).

Center console with dismantled monitor.

he glove box contains external AUX input. You can connect audio signal directly to the input or directly to

the AUX input wires. In the latter case wires will be hidden.

Infrared receiver of connected devices (DVD player, V set) can be placed at the joint of windshield and

ceiling upholstery (wires can be placed under ceiling upholstery). Apply double-sided tape carefully in

order to avoid ungluing because of high temperatures.

Video Interface for Mercedes-Benz 2009

Main Cable Pinout

Wire colour

Wire purpose

Wire marking

Red Power +12V ACC/12V

Black Power GND GND

Blue Rear view camera activation +12V

White External button (not used)

Yellow External button (not used)

Blue RGB input Blue B

Green RGB input Green G

Red RGB input Red R

Yellow RGB input CSync S

Black RGB input GND G

Video Interface for Mercedes-Benz 2009

Sub-Board Cable Pinout

Installation

Install touch screen panel of the adequate size on the LCD front side (monitor cover plate is removed).

Install the sub-board on the back of LCD. Connect touch screen panel flex cable to sub-board connector,

also connect LCD matrix flex cable. Join sub-board and video interface by long flexible flat cable.

Connection is completed.

Remove marked components.

Solder wires connected to sub-board J10 socket to the marked points.

See J10 socket pinout on the page 4.

Cut off the marked lanes. Be careful!

he board is multilayer and you can damage internal layers and lanes on them.

Solder wires connected to sub-board J10 socket to the marked points.

See J10 socket pinout on the page 4.

After soldering attach J10 connector to the sub-board.

Attach interface to the bottom of the monitor.

Command original monitor power connector pinout:

1. Red with yellow stripe - +12V

2. Brown – GND

3. Brown with red stripe - CAN HIGH

4. Brown - CAN LOW

In order to switch between video inputs (original image, RGB input, AV1, AV2) you have to press NAVI

button on the OEM monitor (marked on the picture).When switching to reverse gear image from the rear

view camera will be automatically displayed even if original image is active.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Car Solutions Système vidéo embarqué

Car Solutions

Car Solutions QVI-AUD09-V6 Manuel utilisateur

Car Solutions

Car Solutions RGB-LE-V3 Manuel utilisateur

Car Solutions

Car Solutions PCM5.0 Manuel utilisateur

Car Solutions

Car Solutions QPE-AUDI16-CMD Manuel utilisateur

Car Solutions

Car Solutions Qvix Manuel utilisateur

Car Solutions

Car Solutions GEMENI GE-100 Guide de configuration

Car Solutions

Car Solutions Video Interface Manuel utilisateur

Car Solutions

Car Solutions QHI-LVTX-XC90 Manuel utilisateur

Car Solutions

Car Solutions R04-MB14 Manuel utilisateur

Car Solutions

Car Solutions RNS-E PU Manuel utilisateur

Car Solutions

Car Solutions QVL-E65-V2 Manuel utilisateur

Car Solutions

Car Solutions 500 Series Manuel utilisateur

Car Solutions

Car Solutions CADILLAC ESCALADE TDL2 Manuel utilisateur

Car Solutions

Car Solutions 875016 Manuel utilisateur

Car Solutions

Car Solutions QHI-LVTX-LR-XE Manuel utilisateur

Car Solutions

Car Solutions QVI-lvtx-1ch-v6 Manuel utilisateur

Car Solutions

Car Solutions FV-BENZ-567 Manuel utilisateur

Car Solutions

Car Solutions JP-2018-180704 Manuel utilisateur

Car Solutions

Car Solutions PIP-RGB-HE-STD-V5 Manuel utilisateur

Car Solutions

Car Solutions HD-LINK IW04VW Manuel utilisateur

Car Solutions

Car Solutions QVL-RCD-D4-MAIN-V1 Manuel utilisateur

Manuels Système vidéo embarqué populaires d'autres marques

Stinger

Stinger HEIGH10 RB10RAM13B Manuel utilisateur

Eonon

Eonon E1057 Manuel utilisateur

Milion

Milion D2223 Manuel utilisateur

Metra Electronics

Metra Electronics 99-8153 Manuel utilisateur

Voxx Electronics

Voxx Electronics HR8MA1 Manuel utilisateur

Axxera

Axxera AV604Bi Manuel utilisateur

Clarion

Clarion NX706E Manuel utilisateur

Pyle view

Pyle view PLDN74BTi Manuel utilisateur

Clarion

Clarion NX602 Manuel utilisateur

PowerAcoustik

PowerAcoustik PTID-5850N Manuel utilisateur

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Guide de l'utilisateur

Lanzar

Lanzar SVDVD5 Manuel utilisateur

Kia

Kia MTXM100YPPE Manuel utilisateur

Eonon

Eonon E1060 Manuel utilisateur

Macrom

Macrom M-AN900 Manuel utilisateur

Hyundai

Hyundai BAPE-L3000N Manuel utilisateur

r.LiNK

r.LiNK RL2-UCON8-SM Manuel utilisateur

Blaupunkt

Blaupunkt DVP 01C Manuel utilisateur