Car-Interface CI-DAB-MMI3G Guide d'installation
www.car-interface.com
2.Start Up
1
2
QUICK MANUAL
AUDI MMI 3G
1.Introduction
CI-DAB-MMI3G device is a DAB/DAB+ radio receiver. It is
designed to receive digital radio stations in vehicle equipped
with digital sound system. CI-DAB-MMI3G supports the
"following service" function.
Warning! CI-DAB-MMI3G device is controlled from MMI control panel buttons.
To start listening of digital radio stations from DAB/DAB+ radio receiver, press
the RADIO button on MMI control panel, 1 then press the button which
controls WAVE BAND function. 2Fig.1
Select DAB from list of available wave bans. Fig.2
Fig. 1 Fig. 2
CI-DAB-MMI3G
DAB+/DAB Radio for CAR
www.car-interface.com
3.Selecting and changing
Warning! At first start up of device run a SCAN function to search new stations
and add them to list.
Dab radio stations are broadcasted in blocs called multiplex, each multiplex
include up to 32 stations. Station list is displayed in form of Multiplex name
which includes name of stations. Fig.3
For easier explore of station list we can roll or unroll given multiplex.
For this purpose use roll button from MMI control panel.
Name multiplex
Name DAB radio
stations
Fig. 3
www.car-interface.com
4.Searching process
Tostart SCAN function, press FUNCTION button 1 , then select and
press button which is shown on display, using knob from MMI control
panel 2 . Fig.5, Fig.6
Fig.6
Process of searching and adding new stations can take about 40 sec. After
finish of SCAN procedure number of added multiplex will be shown on
display 3 , then device will start playing last listening station or first station
from list (if last listened station is not available).
3 M=0 means that is not found any multiplex.
Name radio station
Name multiplex
rys.7
Fig.7
Warning! When received station has poor quality Signal, sound can
disappear for short moments or completely.
1
2
Fig.5
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Car-Interface Récepteur de voiture
