Capture CA-SC-20200B Manuel utilisateur
2D BARCODE SCANNER
CA-SC-20200B
Quick Start Guide
1
Getting Familiar with Your Device
Thank you for choosing Capture Bar Code Scanner. All Devices deliver
world-class performance for a broad range of applications to unleash your
productivity with ease.
This document provides an easy reference for installation and operation
purpose. The complete documentation is available at
eu.eetgroup.com/i/ca-sc-20200b-capture-coreded-2d-scanner
CA-SC-20200B
Power Indicator
Status Indicator
Trigger Switch
Scan Window
Beeper
Cable Release Hole
2
Connecting to Your Host
The devices support USB and RS-232 Serial interfaces. Please choose your
desired interface cable, plug it into the scanner’s interface port and connect it
to the desired port of your host. If you want to remove the cable, simply
straighten one end of a paper clip, and insert it into the cable release hole to
pull out the cable.
RS232 Serial
USB HID & USB COM
USB HID (Human Interface Device)
The scanner works as a generic USB keyboard.
USB COM Port Emulation
The scanner works as a legacy RS232 serial device. Please note that you
have to install the USB Virtual COM software driver before connecting the
scanner.
3
Using SmartStand
The optional CA-SS-1 SmartStand is specifically designed for hand-free
applications to maximize user’s comfort and productivity. You can adjust the
scanner holder to desired position for optimized scanning.
Thanks to the advanced Auto-sense design, the scanner is capable of
switching between presentation scanning and hand-held scanning
automatically while working with the optional SmartStand.
In presentation mode, the bar code may not be detected by the scanner in an
environment with very dim ambient lighting. You may have to select higher
sensitivity level through the setting of Presentation Sensitivity to increase
scanner’s detecting sensitivity.
Level 3
Level 1
Level 6
Level 4
Level 2
Level 7
Level 5 ◆
For area imager used in presentation mode, you can enable or disable the
scanner’s presentation background lighting according to the ambient light
condition. When the ambient light is dim or dark, you can enable this function
to turn on the scanner’s LED illumination. This is helpful for scanner to detect
the motion of scene.
Presentation Background Lighting
On ◆
Presentation Background Lighting
Off
4
Operation Modes area imager
Capture Area Imager supports various operation modes, including trigger,
presentation, alternative, level, force, toggle, diagnostic, low power and
multiple read modes. The details of each operation mode are listed below for
reference.
Trigger Mode
When trigger mode is selected, the scanner goes into standby state after
scanning the bar code. You must press the trigger switch to turn on the
scanner’s light source before scanning the bar code.
Presentation Mode
When presentation mode is selected, the scanner is preset to turn on the
background lighting to detect the bar codes. Once the scanner detects an
image similar to a bar code, it will try to decode the bar code immediately.
5
Alternative Mode
When alternative mode is selected, the scanner keeps the light source on till
the preset “light source on time”is up. After turning off the light source, you
must press the trigger switch to turn on the light source again. After each
good read, the timer counter of light source on time is reset. You do not have
to press the trigger switch frequently. This is very useful for multiple scanning.
Level Mode
When level mode is selected, the scanner continues to keep the light source
on till a bar code is decoded, or the preset “light source on time”is up.
When a bar code is decoded successfully, the scanner turns off the light
source immediately. After the scanner turns off the light source, you have to
press the trigger switch to turn on the light source again. If there is no
scanning operation performed during the preset “light source on time”, the
scanner will turn off the light source after the preset “light source on time”is
up.
6
Force Mode
When force mode is selected, the light source of the scanner is forced on for
a continuing operation without having to press the trigger switch. This mode
is convenient for high speed scanning.
Toggle Mode
When toggle mode is selected, you must press the trigger switch to turn on
the scanner’s light source to start scanning. The scanner keeps the light
source on until you press the trigger switch again. This mode is very similar to
alternative mode but without the preset light source on time concern.
7
Diagnostic Mode
When diagnostic mode is selected, the scanner’s light source is forced on
without regard for other programmable parameters, such as reread delay,
redundancy, and so on.
Low Power Mode
When low power mode is selected, the scanner goes into idle state after
having scanned the bar code. You must press the trigger switch to wake up
the scanner for further operation.
Multiple Read Mode
When multiple read mode is selected, the scanner is allowed to decode
multiple bar codes with a single pull of the trigger. When you press and hold
the trigger to aim at a series of bar codes, the scanner will decode each bar
code and beep for each good read. For more precise bar code decoding, you
are recommended to enable Center Alignment function while multiple read
mode is selected. You can enable Unique Bar Code Reporting function to
report for unique bar code when the scanner trigger is pressed. For the
setting of Center Alignment and Unique Bar Code Reporing, please refer to
the Programming Manual for details.
8
Keyboard Interface Quick Set
- Record Suffix -
None
RETURN ◆
TAB
SPACE
ENTER
- Keyboard Layout -
USA ◆
France
Germany
United Kingdom-UK
Czech Republic
Spain (Spanish)
Denmark
Nertherlands
Italy
Sweden/Finland
Norway
9
Serial Interface Quick Set
- Record Suffix -
None
TAB
LF
CR ◆
SPACE
CRLF
- Baud Rate –
115.2K BPS
4800 BPS
19.2K BPS
57.6K BPS
2400 BPS
9600 BPS ◆
38.4 BPS
1200 BPS
- Data Frame -
8, None, 1 ◆
7, None, 2
8, None, 2
8, Odd, 1
7, Odd, 2
7, Odd, 1
8, Even, 1
7, Even, 2
7, Even, 1
8, Space, 1
7, Space, 2
7, Space, 1
8, Mark, 1
7, Mark, 2
7, Mark, 1
Autres manuels pour CA-SC-20200B
1
Table des matières
Autres manuels Capture Lecteur de codes-barres
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
