Canon Creative park Manuel utilisateur

View of completed model

Front Right side

Left sideBack

PAGE01

Drum set : Assembly Instructions

Parts sheet (Pattern) :Twenty-two A4 sheets (No.1~No.22)

No.of Parts :384

Assembly Instructions :Ten A4 sheets (No.1~No.10)

*Build the model by carefully reading the Assembly Instructions,in the parts sheet page order.

*Assembly will be easier if you write the part's number on the back of each part.

A drum set is a collection of various types of drums, cymbals and other percussion instruments that are

lined up in a formation that makes them easily played by one person. The number and type of

instruments included can be arranged according to the performer's preference or characteristics of the

music. The performer usually plays seated on a stool. The idea for the drum set is said to have

originated in military bands, when a cymbal was placed on top of the bass drum to make it easier for

the performer holding it. This was followed by the idea to use a pedal to play the bass drum with the

foot, and the invention of the hi-hat, two cymbals on top of each other that are clashed together. These

adaptations have resulted in the drum set up and beat style we know today.

Trace along the folds with a ruler and a used pen (no ink) to

get a sharper, easier fold.

Handy Hint

Mountain fold (dotted line)

Make a mountain fold.

Glue, scissors and other tools

may be dangerous to young

children so be sure to keep them

out of the reach of young

children.

Scissors, set square, glue (We

recommend stick glue),pencil,

used ballpoint pen, toothpicks,

tweezers,

(useful for handling small parts)

Assembly tip CautionAssembly Instructions Tools and materials

Valley fold

(dashed and dotted line)

Make a valley fold.

Scissors line (solid line)

Cut along the line.

Cut In line (orange solid line)

Cut a slot.

Cut out (orange shaded)

Cut out the area marked.

The glue spot(colored dot)

shows where to apply the glue.

Glue spot (Red dot)

Glue parts with the same number together.

Glue spot (Green dot)

Glue within the same part.

Glue spot (Blue dot)

Glue to the rear of the other part.

Glue spot (Yellow dot)

Apply glue to the back, and attach to the back of the other parts.

Before gluing, crease the paper

along mountain fold and

valley fold lines and make sure

rounded sections are nice and

stiff.

PAGE02

Drum set : Assembly Instructions

Wrapping the piece around a can or other

cylindrical object will result in a neater finish.

Handy Hint:

PAGE02

PAGE03

Bass drum

Front side

Back side

*NB: Begin from the opposite side

to the seam.

Upper part

Front side

Back side

Align the marker lines on 3A

and 3B with the glue spots on

3C ~ 3H, and attach.

*Align the reverse sides and attach.

*NB: Align the thick marker line

with the upper part, and insert

it through to the front side.

Do not apply glue.

*Attach to the display stand later.

Before starting.

Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet

No.1~No.22).Work in order of these sheet numbers.(The parts for assembly are on pages 2 ~ 22.)

There are 384 parts in total,and each part is numbered according to its page.

Also,the glue spots on each part are marked with the number of the part to attach to them.

The numbers ~ in the Assembly Instructions indicate the order to attach parts.Follow

this order when attaching.

When one part has multiple spots to attach,or glue spots for attaching other pieces,colors

( ) and numbers are used to show the precise location and method for attaching.

Check the diagrams in the "Assembly Instructions" carefully for each part as you work.

Diagonal line

Seam

Bass drum

Lower part

Upper part

*Take note of where

the thick marker line is.

PAGE03

Drum set : Assembly Instructions

*Take note of where

the thick marker line is.

Upper part

Lower part

*Align the reverse sides and attach.

*Be sure to align the thick black marker lines

on the top and bottom (circled here in blue)

when attaching.

Inside

*Attach the back.

Wrapping the piece around

a thin cylindrical object will

result in a neater finish.

Align the seam lines and

insert the pieces inside

each other, and attach to

the specified position.

Assemble both the left

and right parts so that

their seams face outwards.

Face the seam line

inwards and insert the

piece to the position specified.

PAGE04 PAGE05

PAGE06

*Roll up and attach.

*Do not attach the

area marked with

the diagonal lines.

*After attaching, swivel the

pieces around as shown,

so that the seams face inwards.

*Attach the parts circled in blue

around the tom holder pipes so

that the pipes are held up vertically.

Seam line

Tom holder pipe

Tom-tom 13" x 10"

Bass drum Bass drum

Align the marker lines on 6A

and 6B with the glue spots on

6C ~ 6H, and attach.

PAGE04

Drum set : Assembly Instructions

PAGE06

*Before attaching parts 6O and 6P, bend them into shape as shown in the diagram.

*Begin from the opposite side to the seam. *Begin from the opposite

side to the seam.

PAGE07

*NB: Align the thick marker line

with the specified position

on the upper part, and insert

it through. Do not apply glue.

*NB: There are 12 6Q parts altogether.

One of them, marked 6Q-1, has a

specific location for attaching.

Take note of the markings

*Before attaching parts 7P and 7Q, bend them into shape as shown in the diagram.

*Take note of where

the thick marker line is.

*Align the reverse sides and attach.

*NB: Align the thick

marker line with

the specified position

on the upper part, and

insert it through.

Do not apply glue.

Tom-tom 13" x 10"

Upper part

Lower part

Seam

Lower part

Upper part

*Do not apply glue to .

Tom-tom 12" x 9"

Upper part

Lower part

Align the marker lines on 7A

and 7B with the glue spots on

7C ~ 7H, and attach.

*Be sure to align the thick black marker lines

on the top and bottom (circled here in blue)

when attaching.

Seam

Upper part

Lower part

Upper part *Do not apply glue to .

Take note of

the markings

*NB:

There are 12 7R parts altogether.

One of them, marked 7R-1, has a

specific location for attaching.

Specified position

PAGE05

Drum set : Assembly Instructions

PAGE02 03 04 05 06 07

Bass drum / Tom-tom 13" x 10" / Tom-tom 12" x 9"

PAGE08

Floor tom

PAGE09

*NB: There are 16 8H parts altogether.

Head

Bass drum front head

Shell

Bass drum bar

Tom holder

Bass drum hook

Lug

Bass drum

Tom-tom 13" x 10" Tom-tom 12" x 9"

Lug

*Begin from the opposite

side to the seam.

Lower part

*Align the reverse

sides and attach.

*Take note of where the thick marker line is.

*Take note of where

the thick marker line is.

*Before attaching parts 8F and 8G, bend them into shape as shown in the diagram.

Floor tom

Upper part

Lower part

Seam

Upper part

Lower part

*Do not apply glue to . *NB:

Align the thick marker line

with the specified position

on the upper part, and insert

it through. Do not apply glue.

Align the marker lines on 9A

and 9B with the glue spots on

9C ~ 9H, and attach.

*Be sure to align the thick black marker lines

on the top and bottom (circled here in blue)

when attaching.

Specified position

PAGE06

Drum set : Assembly Instructions

PAGE09

Floor tom

PAGE10

Snare drum

PAGE11

Leg

Rubber foot

Upper part

Lower part

Lower part Upper part

Align the snare wire position and fit the head on.

Do not apply glue.

*Align the reverse sides and attach.

*Align the reverse

sides and attach.

*After completing the

stand, place the snare

drum on the arm.

Do not apply glue.

*Before attaching parts 10R and 10S, bend them into shape as shown in the diagram.

*Begin from the opposite

side to the seam.

Snare wire picture

*Roll up and attach.

Rubber arm

Stand

Rubber foot

Snare wire position

Head

Shell

Lug

Head

Shell

Upper part

Lower part

Seam

*NB: There are 8 10T parts altogether.

Align the marker lines on 10A

and 10B with the glue spots on

10C ~ 10H, and attach.

*Be sure to align the thick black marker lines

on the top and bottom (circled here in blue)

when attaching.

*Take note of where

the thick marker line is.

*Do not apply glue to .

Snare drum

*Align the snare

wire position here.

PAGE07

Drum set : Assembly Instructions

PAGE12

*Align the reverse

sides and attach.

*Align the reverse

sides and attach.

*Align the reverse

sides and attach.

*Align the seams

and attach.

*Align the seams

and attach.

*Align the seams

and attach.

Ride cymbal

PAGE13

Crash cymbal

*Align the seams

and attach.

*Roll up and attach.

Rubber foot

Stand

Cymbal stand nut

Die-cast joint

Angle adjustment tilter

Die-cast joint

Cymbal

*Align the reverse

sides and attach.

Felt for clutch

*Align the seams

and attach.

*Align the seams

and attach.

*Align the

reverse sides

and attach.

PAGE08

Drum set : Assembly Instructions

PAGE14

Hi-hat cymbal

Rubber foot

Stand

Extension rod

Hi-hat clutch

Hi-hat cymbal

Die-cast joint

*The hi-hat cymbal moves

when you press the foot pedal.

*Put the pieces back to back

and attach together.

*Back side of 14C

Curl.

Foot pedal

*Roll up and attach.

Hi-hat cymbal

*Align the seams and attach.

*Align the seams

and attach.

*Align the seams

and attach.

*Align the seams

and attach.

*Align the reverse

sides and attach.

*Do not apply glue to .

PAGE14 15

PAGE09

Drum set : Assembly Instructions

PAGE15

*Bend the pieces

left and right to

open a gap.

*Back side of 16B

Drum pedal

PAGE16

Drum stool

Seat

Leg

Rubber foot

*The felt beater moves when you press the foot pedal.

Foot pedal

Felt beater

Frame

*Align the reverse

sides and attach.

Do not apply glue.

*Roll up and attach.

*Align the reverse

sides and attach.

*Align the reverse sides and attach.

Ride cymbal

Crash cymbal

Tom-tom 13" x 10"

Tom-tom 12" x 9"

Hi-hat cymbal

Snare drum

Floor tom

Drum stool

Bass drum

Drum pedal

PAGE10

Drum set : Assembly Instructions

Display stand

*The completed photo is an image of a basic drum set. The parts can be arranged to your liking.

*Fold inside and attach.

Display stand

PAGE17 18 19

PAGE20 21

PAGE21 22

View of completed model

Autres manuels pour creative park

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Jouet

Canon

Canon PAPER CRAFT Moving Tiger through o ring of... Manuel utilisateur

Canon

Canon Lunar Globe Manuel utilisateur

Canon

Canon Grand Piano Manuel utilisateur

Canon

Canon Creative Park Hwaseong Fortress Manuel utilisateur

Canon

Canon CREATIVE PARK Komatsu Special Vehicle 04... Manuel utilisateur

Canon

Canon CREATIVE PARK Manta ray Manuel utilisateur

Canon

Canon Paper Craft Emperor Penguin Manuel utilisateur

Canon

Canon Viva! Welcome to Circusland! Manuel utilisateur

Canon

Canon PAPER CRAFT Tyrannosaurus rex Manuel utilisateur

Canon

Canon Thoroughbred Manuel utilisateur

Canon

Canon Creative Park Moving Clown in a barrel Manuel utilisateur

Canon

Canon CREATIVE PARK Shoebill Manuel utilisateur

Canon

Canon PAPER CRAFT Euoplocephalus Manuel utilisateur

Canon

Canon creative park Guide de démarrage rapide

Canon

Canon CREATIVE PARK Pop-up Card (Halloween / Black cat &... Manuel utilisateur

Canon

Canon PAPER CRAFT Rainbow beetle Manuel utilisateur

Canon

Canon Paper Craft Manuel utilisateur

Canon

Canon Creative Park Pomeranian Manuel utilisateur

Canon

Canon CREATIVE PARK Yajirobe Manuel utilisateur

Canon

Canon Creative Park Pop-up Card (Snowman) Manuel utilisateur

Canon

Canon Creative Park Toy Poodle Manuel utilisateur

Canon

Canon CREATIVE PARK Bottlenose Dolphin Manuel utilisateur

Canon

Canon Creative Park Shaky-Shaky Maracas Manuel utilisateur

Canon

Canon Creative Park Leaping Goat Pattern Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur

Mattel

Mattel HOTWHEELS DWL04 Manuel utilisateur

Canon creative park Manuel utilisateur

Manuels Jouet populaires d'autres marques