Canon LASER SHOT LBP-2410 Manuel utilisateur

English

LASER SHOT LBP-2410

Getting Started Guide

Read this manual carefully before using your printer.

Save this manual for future reference.

This manual describes the instructions to get

your printer ready for use.

Contents

Step1 Taking the Printer out of the Package and

Installing the Printer ........................................ 6

Conﬁrming the Package Contents.............................. 6

Carrying the Printer to the Installation Site................. 6

Step2 Connecting the Power Cord and Turning the

Printer ON......................................................... 8

Step3 Installing a Drum Cartridge and Toner

Cartridges....................................................... 10

Step4 Loading Paper ................................................ 17

Loading Paper in the Multi-purpose Tray.................. 17

Selecting an Output Tray .......................................... 20

Step5 Installing the Software and Connecting the

Printer to a Computer .................................... 22

After Completing Installation .................................... 25

Printing a Test Page.................................................. 26

When Installation Fails ............................................. 27

Step6 Installing the Optional Equipment................ 31

Installing the 250-sheet Paper Feeder ..................... 31

Installing the Network Board (AXIS 1611)................ 40

Appendix...................................................................... 44

Contents of CD-ROM

.................................................. 44

Manuals for the Printer

CD-ROM

Getting Started Guide (This Manual)

User's Guide

Instructions for printing, regular maintenance, and troubleshooting

Guides with this symbol are PDF manuals included on the

accompanying CD-ROM.

(Before using the CD-ROM, see "Contents of CD-ROM," on p.44.)

CD-ROM

Preface

Conventions

The following symbols are used in this manual to explain procedures,

restrictions, handling precautions, and instructions that should be observed

for safety.

WARNING

Indicates a warning concerning operations that may lead to death or

personal injuries if not performed correctly. In order to use the printer

safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to personal

injuries or damage to properties if not performed correctly. In order

to use the printer safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read

these items carefully in order to operate the printer correctly, and to

avoid damaging the printer.

NOTE

Indicates a clariﬁcation of an operation, or contains additional

explanations for a procedure. Reading these notes is highly

recommended.

No part of this publication may be reproduced or transmitted in

any form or by any means, electronic or mechanical, including

photocopying and recording, or by any information storage or

retrieval system without the prior written permission of Canon

Inc.

Notice

Canon makes no guarantees of any kind with regard to this

manual. Canon shall not be held liable for errors contained

herein or for consequential or incidental damages incurred as a

result of acting on information contained in the manual.

Abbreviations Used in this Manual

In this manual, product names and model names are abbreviated as follows:

Microsoft

Windows

98 operating system: Windows 98

Microsoft

Windows

Millennium Edition operating system

: Windows Me

Microsoft

Windows

2000 operating system: Windows 2000

Microsoft

Windows

XP operating system: Windows XP

Microsoft

Windows

operating system: Windows

LASER SHOT LBP-2410: LBP-2410

Trademarks

Canon, the Canon logo, LASER SHOT, LBP, and NetSpot are trademarks of

Canon Inc.

Adobe

and Acrobat are trademarks of Adobe Systems Incorporated.

IBM and PowerPC are trademarks of International Business Machines

Corporation in the United States.

Microsoft and Windows are registered trademarks of Microsoft Corporation in

the United States and/or other countries.

Ethernet is a trademark of Xerox Corporation in the United States.

Other product and company names herein may be the trademarks of their

respective owners.

English

Optional Equipment

The following options are available to use the printer to its full extent

accurately. For the optional items, consult the store where you purchased the

printer.

■

250-sheet Paper Feeder

A 250-sheet paper feeder can be installed at the bottom of this printer. Up

to approximately 250 sheets of plain paper (64 g/m

) in sizes of A4, B5,

A5, Legal, Letter, and Executive can be loaded in this cassette.

■

Network Board (AXIS 1611)

By installing the optional network board (AXIS 1611), you can use the

LBP-2410 directly connected to the network.

For more details on the AXIS 1611, access the web site of Axis

Communications (http://www.axis.com/).

Installation Site

Installation Environment

In order to operate the printer smoothly and safely, install the printer where

"Temperature/Humidity Conditions", "Power Conditions", and "Installing

Conditions" described in "Installation Environment" are fulﬁlled.

IMPORTANT

Before installing the printer, be sure to read "Important Safety Instructions"

in the

User's Guide

●

Use power supplies rated for voltages in the following ranges.

100 - 127 V (±10%) 50/60 Hz (± 2 Hz)

220 - 240 V (±10%) 50/60 Hz (± 2 Hz)

●

The maximum power consumption for the printer is 1102 W* or below for 220

- 240 V model (1043 W* for 100 - 127 V model)

Electrical noise or a dramatic drop in power voltage may not only result in

faulty operation or loss of data in the printer, but also in the computer as well.

*Note: 1139 W (220 - 240 V model) / 1067 W (100 - 127 V model) or below when installed

with full options. However, the momentum peak upon turning the power ON is

excluded from the value.

●

Use the printer where the temperature and humidity are in the following

ranges.

Ambient temperature: 10-30 °C (50 - 86 °F)

Ambient humidity: 10-80 % RH (no condensation)

IMPORTANT

Condensation may occur in the printer in the following situations. Leave

the printer in a new environment for over two hours before it is used so that

the printer can get accustomed to the ambient temperature and humidity. If

condensation occurs in the printer, it may result in misfeeds which will

result in paper jams and printer malfunctions.

- When the room where the printer is installed is heated suddenly

- When the printer is moved from a cool and dry area to a hot and humid

area

Paper Feeder Unit PF-87

Network Board (AXIS 1611)

NOTE

To customers using an ultrasonic humidiﬁer

Impurities contained in tap water or well water are emitted from an

ultrasonic humidiﬁer. Impurities accumulated in the printer may result in

printer malfunctions. If an ultrasonic humidiﬁer is used in the same room

as the printer, use pure water or water that does not contain impurities.

●

Install the printer in the following environment

• A place where sufﬁcient space can be secured

• A well-ventilated room

• A ﬂat surface

• A sturdy platform that can easily tolerate the weight of the printer and optional

equipment

WARNING

Do not install the printer near alcohol, paint thinner, or other

ﬂammable substances. If ﬂammable substances come into contact

with the electrical parts inside the printer, it may result in a ﬁre or

electrical shock.

CAUTION

•

Do not install the printer in the following locations, as it may result in

a ﬁre or electrical shock.

- A damp or dusty location

- A location exposed to smoke and steam such as near stoves and

humidiﬁers

- A location exposed to rain or snow

- A location near water faucets or water

- A location exposed to direct sunlight

- A location subject to high temperatures

- A location near open ﬂames

•

Do not install the printer in unstable locations, such as unsteady

platforms or inclined ﬂoors, or in locations subject to excessive

vibrations as this may cause the printer to fall or tip over, resulting in

personal injuries.

IMPORTANT

Do not install the printer in the following areas. It may result in damaging

the printer.

- An environment where the temperature and/or humidity can change

dramatically, or where condensation occurs

- A poorly ventilated room

- Near devices that generate magnetic or electromagnetic waves

- In rooms such as laboratories where chemical reactions occur

- In a room where corrosive or poisonous chemicals such as salt or

ammonia are present in the air

- A platform that may warp from the weight of the printer and optional

equipment, or where the printer is liable to sink (such as on a carpet or

mat)

English

Installation Space

Secure space around the printer as shown below, and install the printer on a

platform that can tolerate the weight sufﬁciently. The dimensions of each

section, required peripheral space, foot position, and installed height are shown

in the ﬁgure.

System Requirements

Operating system software environment

• Microsoft Windows 98/Me

• Microsoft Windows 2000/XP

Interface Environment

When connecting by USB

• Windows 98/Me: USB Full-Speed (USB1.1 equivalent)

• Windows 2000/XP: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1 equivalent)

When connecting to a network (Requires an optional network board)

• Connector: 10Base-T or 100Base-TX

• Protocol: TCP/IP, NetBIOS/NetBEUI (TCP/IP only for Windows XP)

NOTE

When using Sound, PC synthesizer (and the driver for PCM synthesizer)

must be installed. Do not use a PC Speaker driver (such as speaker.drv).

Dimensions of the Printer

Required Peripheral Space

Foot Position

682

707

328208

100100

100

987

27978 94

451

482

31978 54

357 78.546.5

344 7167

(mm)

325

Pentium 300 MHz or higher

64 MB or more

20 MB or more

Pentium 300 MHz or higher

Windows 2000: 64 MB or more

Windows XP: 128 MB or more

15 MB or more

CPU

Memory (RAM)

Hard Disk

System Requirements (recommended)

System Requirements (minimum required)

* PC/AT compatibles

Windows 98/Me

Windows 2000/XP

PentiumIII 600 MHz or higher

64 MB or more

PentiumIII 600 MHz or higher

Windows 2000: 128 MB or more

Windows XP: 256 MB or more

CPU

Memory (RAM)

Windows 98/Me

Windows 2000/XP

Taking the Printer out of

the Package and

Installing the Printer

Conﬁrming the Package Contents

Conﬁrm that the following items are contained in the package before installing

the printer. If an item is missing or damaged, please contact the store where

the printer was purchased.

NOTE

Interface cables are not included with this printer. Have cables that can be

used with your computer or the connection method available.

Carrying the Printer to the Installation Site

Once the installation site is determined, take the printer out of the package and

carry it to the subject location.

IMPORTANT

•

Install the printer on a platform such as a desk that can tolerate the weight

of the printer sufﬁciently.

•

Do not install the printer and optional equipment on a platform that may

warp from their weight, or where they are liable to sink (such as on a

carpet or mat).

•

When installing an optional 250-sheet paper feeder, install the paper

feeder before taking the printer out of the package. For the installation

procedure, See "Installing the 250-sheet Paper Feeder," on p. 31.

Take the printer out of the package.

IMPORTANT

Be sure that sufﬁcient space is secured before taking the printer out of the

package.

Step1

Power Cord

Printer

Getting Started Guide

(This Manual)

Toner Cartridge (x4)

(EP-87 Toner Cartridge)

Drum Cartridge

(EP-87 Drum Cartridge)

CD-ROM

[User Software for LBP-2410]

CAPT (Canon Advanced

Printing Technology) software

USB Class Driver

Getting Started Guide (This Manual)

User's Guide

English

Carry the printer to the installation site.

Hold the grips located on both sides of the printer securely with both hands.

CAUTION

•

This printer weighs approximately 15 kg when a drum cartridge and

toner cartridges are not installed. Be careful not to hurt your back or

other portions of your body when carrying the printer.

•

Be careful not to hold parts other than the grips for moving the

printer. The printer may drop and result in personal injuries.

•

The back portion of the printer is relatively heavy. Be careful not to

get off-balanced when lifting the printer. The printer may drop and

result in personal injuries.

Set the printer down carefully at the installation site.

CAUTION

Set the printer down slowly and carefully. Be careful not to hurt your

hands.

IMPORTANT

Be sure that there is sufﬁcient space for installing optional equipment and

connecting cables at the installation site.

Heavier on the

back portion

Connecting the Power

Cord and Turning the

Printer ON

IMPORTANT

•

One AC outlet should be used exclusively for the printer.

•

Do not connect the power cord to the auxiliary outlet on the computer.

•

Do not connect this printer to an uninterruptible power source. It may result

in a computer or printer glitch or breakdown due to a power failure.

Conﬁrm that the power switch is turned OFF.

The printer is OFF when the power switch is ﬂush with the surface of the printer.

Connect the supplied power cord into the power socket.

Connect the power plug into the AC outlet.

Step2

English

Press the power switch on the printer to turn it ON.

The Toner lamp (red) will go on after a short period of time.

Illuminate

Installing a Drum

Cartridge and Toner

Cartridges

For details on handling the cartridges, See Chapter 5 "Routine

Maintenance" in the

User's Guide

CAUTION

Be careful not to allow the toner to come into contact with your

hands or clothing. If toner comes into contact, wash it off

immediately with cold water. Washing with warm water will set the

toner and make it difﬁcult to remove the toner stains.

Open the upper cover.

Hold the grip on the upper cover and open it until it stops.

Take the drum cartridge out of the protective bag.

Open the protective bag with scissors, so as not to damage the cartridge.

IMPORTANT

•

Keep the protective bag in which the cartridge came in. It may be required

when taking out the drum cartridge for printer maintenance.

•

Print quality may deteriorate if you touch or damage the drum that is set

inside. Be careful not to touch the drum or open the drum protective

shutter. Be careful not to hold or touch the portions that are not described

for this procedure such as the sensors. It may result in damage to the

printer.

Step3

Sensors

Drum protective

shutter

Autres manuels pour LASER SHOT LBP-2410

Table des matières

Autres manuels Canon Imprimante

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Canon

Canon LBP361dw Manuel utilisateur

Canon

Canon PowerShot S400 Digital Elph Manuel utilisateur

Canon

Canon Colorado 1650 Manuel utilisateur

Canon

Canon iPF5000 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon Pixma G3110 Series Manuel utilisateur

Canon

Canon BJC-4400 Series Manuel utilisateur

Canon

Canon S 820 Manuel utilisateur

Canon

Canon iPF755 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon PRO-300 Series Guide de configuration

Canon

Canon Pixma MG3500 Series Guide de configuration

Canon

Canon PIXMA G7000 Series Manuel utilisateur

Canon

Canon imageCLASS MF4880dw Manuel de service

Canon

Canon imageRUNNER 1019j Manuel utilisateur

Canon

Canon Selphy CP800 Manuel utilisateur

Canon

Canon PIXMA E300 series Manuel utilisateur

Canon

Canon Color Bubble Jet BJC-3000 Series Manuel utilisateur

Canon

Canon imageCLASS MFG500 Series Guide de configuration

Canon

Canon 1750 Manuel utilisateur

Canon

Canon imagePROGRAF iPF765 Guide de l'utilisateur

Canon

Canon PIXMA MG7150 Guide de configuration

Canon

Canon Pixma G1010 Series Manuel utilisateur

Canon

Canon imageCLASS MF5770 Manuel

Canon

Canon PIXMA IP5300 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien