Canon ImagePROGRAF TM-305 Manuel utilisateur

QT6-2699-V01 PRINTED IN XXXXXXXXXXXXXXXX © CANON INC. 2018

QT62699V01

It is recommended that you reserve space of the following dimensions to allow you to work around the printer.

The images below show the space required to install each printer.

Before Setting Up the Printer

Read this manual before attempting to operate the printer.

Keep this manual for future reference.

Set up the printer using the following procedure.

• Windows is a trademark or registered trademark of Microsoft

Corporation in the U.S. and/or other countries.

TM-305/TM-300

Installation space (W x D x H)

∙ When using SD-32

66.5 x 67.0 x 53.6 inches (1689 x 1700 x 1360 mm)

TM-205/TM-200

Installation space (W x D x H)

∙ When not using the stand

54.5 x 53.5 x 29.1 inches (1382 x 1358 x 739 mm)

∙ When using SD-23

54.5 x 67.0 x 53.6 inches (1382 x 1700 x 1360 mm)

Installation Space

Overview of Setup

Important

• The printer stand may not be included with your model.

• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the

position in the illustration.

Important

• Instructions in this Setup Guide show the TM-305 printer. Note that your printer may look different from these illustrations in some cases. However, the basic

operations are the same.

If an error message appears during setup or other problems

occur, refer to "Responding to Messages" on p.14.

RMC (Regulatory Model Code): K10489

RMC (Regulatory Model Code): K10490

RMC (Regulatory Model Code): K10487

RMC (Regulatory Model Code): K10488

Setup Guide

Introductory Information

ENGLISH

In order to ensure that this product is used safely, be sure to read the precautions.

-> Quick Guide (separate manual)

∙ Check this also after setup is complete.

7.9 inches

(200 mm)

0.4 inches

(10 mm)

7.9 inches

(200 mm)

11.8 inches (300 mm)

0.4 inches

(10 mm)

7.9 inches

(200 mm)

23.6 inches

(600 mm) 23.6 inches

(600 mm)

23.6 inches

(600 mm)

(When not using

the stand)

(When using the stand)(When using the stand)

7.9 inches

(200 mm)

11.8 inches (300 mm)

*Assembling the Stand (P. 3) *Refer to the

separate manual

Installing the Printer ( P. 3)

Turning On the Printer ( P. 5)

Installing the Ink Tanks( P. 6)

Installing the Print Head (P.7)

Loading Paper ( P. 9)

Printing From a Smartphone or Tablet ( P.13)

Storing Accessories (P.13)

Loading Roll Paper After Setup (P.13)

Displaying the Online Manual (P.14)

∙ Performing Print Head Adjustment and

Selecting the Connection Method (on p.11 to p.13)

∙ Connecting to the Printer

Package Contents

A. Printer

B. Roll holder: Already mounted on printer

C. Holder stopper (*1)

D. 3-inch paper core attachment (R, L)

E. Print head

F. Starter ink tanks (for rst-time installation)

(C, M, Y, MBK, BK)

G. Paper for adjustment

H. Setup Guide (this manual)

I. Set of printer documentation

J. Set of CD-ROMs

K. Power cord

L. Stand set (*2)

*1 The holder stopper is used when loading roll paper.

For details, refer to the Online Manual.

*2 Stand set

∙ Only included as standard in some regions.

∙ It may be packaged in a separate box depending

on the region where you purchased the printer.

∙ Stand accessories are described in the Printer

Stand Setup Guide.

Manuals Supplied with This Printer

Printed Manuals

Setup Guide (this manual)

Describes how to setup the printer.

Quick Guide

Contains information related to warnings for

using this product safely and information related

to replacing paper, ink tanks, and the print head.

Printer Stand Setup Guide

Describes how to assemble the stand.

This may not be included depending on your region

and selected purchase options.

Electronic Manuals

Online Manual

The Online Manual describes all aspects of printer use from

basic instructions for printing on roll or cut sheet paper, to

tips for saving paper and maintaining the best printing quality.

It also describes how to print posters and banners from the

supplied software.

To view the electronic manuals, refer to "Displaying the

Online Manual" (p.14).

The following manuals are included with this printer.

Note

• Some items are included with the printer but not described in this manual.

Keep these items in a safe place after setup because they are used in various printing applications.

• For instructions on the included items not described in this manual, refer to the Online Manual. ("Displaying the Online Manual" on p.14)

• A cable to connect the printer to a computer is not provided with the printer.

∙ When using the stand

-> Assemble the stand on which you will install the printer by referring to the Printer Stand Setup Guide (separate manual).

∙ When not using the stand

-> Proceed to "Installing the Printer".

Remove the packaging material.

Remove all of the tape and other packaging material.

Remove the tape afxed to the roll holder.

Assembling the Stand

Installing the Printer

Have 3 people lift up the printer. Have 1 person grasp the carrying handles at the bottom of each side, and 1 person grasp the handles in the middle

of the rear side.

• Moving the printer requires at least 3 people, holding it on the left, right,

and rear sides. Be careful to avoid back strain and other injuries due to

the weight of the printer.

∙ TM-305: Approx. 108 lb (49 kg)

∙ TM-300: Approx. 106 lb (48 kg)

∙ TM-205: Approx. 91 lb (41 kg)

∙ TM-200: Approx. 91 lb (41 kg)

• When moving the printer, rmly grasp the carrying handles (A) under

each side and at the rear side. Holding the printer at other positions is

dangerous and cause injury and damage if the printer is dropped.

Caution

Place the printer on the stand such that the rear bottom corners of

the printer are aligned with the corners of the stand.

Important

• If you are not using a stand, place the printer in the

installation location and proceed to "Turning On the

Printer".

Afx the printer to the stand.

Use an allen wrench to secure the printer with 2 M4 hex screws on

each side from the underside of the supporting plate.

• When setting the printer down temporarily make sure to put the printer on

a at, stable surface.

• Supporting only the center of the printer when carrying or setting the

printer down may damage the printer.

Caution

Insert the power cord into the power connector on the side of the

printer, and attach an earth wire to the earth terminal on the back of

the printer using a screwdriver.

Plug the power cord into the outlet.

Turning On the Printer

Turn on the printer.

When the language selection screen appears on the touch screen,

select a language. Then, if the screen for selecting a time zone

appears, select your region.

When a message asking you to start the setup appears on the touch

screen, select OK.

Open the pouch and remove the ink tank.

B A

Important

• Never touch the ink holes

(A) or metal contacts (B).

Touching these parts may

cause stains, damage the

ink tank, and affect print

quality.

• Avoid dropping the ink

tank after removing it from

the pouch. Otherwise,

ink may leak and cause

stains.

• Do not remove ink tanks to

shake them after they have been

mounted. Doing so may cause ink

to spill.

Insert the ink tank into the holder, with the

ink holes facing downwards as shown in

the gure.

Important

• If the ink tank does not t into the

holder, check that the color on the

ink tank label matches the color

shown on the ink tank lock lever.

Check also the orientation of the ink

tank.

Close the ink tank lock lever until it clicks.

Instructions on ink tank installation are

shown on the touch screen. Open the ink

tank covers as instructed by grasping the

handles.

While pushing the tip of the ink tank lock

lever horizontally, open the ink tank lock

lever upwards.

Shake each ink tank gently 1 or 2 times

before opening its pouch.

Important

• Failure to shake the ink tanks

may result in reduced print quality

because ink ingredients have

settled on the bottom of the tank.

Note

• If the ink tank is cold, allow it to

adjust to room temperature before

attaching it to the printer.

Installing the Ink Tanks

Install the 5 ink tanks by following the instructions on the screen.

Repeat steps 2 to 6 to install each of the

ink tanks.

Close the ink tank covers.

Check that the color of the ink tank that

was set is displayed on the touch screen,

and select OK.

Important

• If the touch screen does not show

the color, repeat steps 2 and 6.

When the instruction to open the top cover appears on the touch

screen, open the top cover.

Instructions are now shown on the touch screen regarding print head

installation.

Important

• When installing the print head, do not move the carriage

(A) from the position in the gure.

If you accidentally move the position of the carriage (A),

close the top cover. The carriage (A) will move to the

position in the gure.

Tilt the print head lock lever towards you.

Open the print head locking cover (A) and select OK on the touch screen.

At this time, check that there is no dirt on the electrical contacts (B) of the carriage.

Remove the print head from the bag by holding the tab parts (A).

Remove the orange protective cap (A), and then remove the other

orange protective cap (B) by holding the tab part (C).

B C

Important

• Do not touch the part that was being protected by the

protective cap under any circumstances. Touching it may

cause damage to the print head or printing problems.

• The print head is lled with ink. It is recommended that you

remove the protective materials over the bag that the print

head came in or something like that to prevent spills from

soiling your clothing or the surroundings.

• Do not reattach the protective caps after removing them.

Dispose of them according to local regulations.

Installing the Print Head

Insert the print head into the carriage (B) with the ink holes (A)

on the upper side and facing towards you as shown in the gure.

Carefully push the print head rmly into the carriage (B), ensuring

that the part covered by the protective caps does not touch the

carriage.

Pull the print head locking cover down toward the front to lock the

print head in place.

Push the print head lock lever all the way to the end.

Check that the angle adjustment lever is aligned with the position of

the red ■(A). If it is not aligned, align the angle adjustment lever with

the red ■(A).

Close the top cover.

When Select the paper on which to

print the print head alignment pattern.

appears on the touch screen, select

Manual.

The touch screen shows instructions on

how to load cut sheets.

Slide the width guide (A) to align it with a

marker indicating the size of the loaded

paper. In this example, align the guide

to A2, which is the size of the provided

paper for adjustment.

Prepare 1 sheet of paper for adjustment.

Identify the printed side by referring to

the bag in which the paper came.

Important

• Return unused paper to the bag

in which it came and store it

away from high temperature, high

humidity, and direct sunlight.

Load the paper for adjustment.

Loading Paper

Insert the paper straight into the feed slot,

with the printed side facing up, so that the

right edge of the paper is aligned with the

paper alignment guide (A) on the right

side of the roll paper cover.

Insert the paper until the edge makes

contact and you hear 2 short beep

sounds.

Printing

side

Important

• This printer allows only 1 sheet to

be loaded. Do not load 2 or more

sheets. Doing so may cause a

paper jam.

• If the paper is wavy or warped, it

may cause a paper jam. Flatten out

the paper before loading it.

Adjust the position of the width guide (A)

according to the size of the loaded paper.

Align the width guide exactly with the

paper to avoid the loaded paper from

tilting or crinkling.

The screen for selecting the paper type

appears. Select the type of paper you

loaded.

In this example, select Coated papers

and then Coated papers.

The paper starts feeding.

When the paper feed is nished, the printer automatically starts

charging the ink for the rst time and adjusting the print head.

This takes about 25 minutes.

During this time, install the software on the computer. (Refer to

"Connecting to the Printer" on p.12)

Note

• Charging the system with ink lls the system from the ink

tanks to the print head. In addition, cleaning is performed

to keep the printer in optimal condition. This may cause the

remaining ink indicator and maintenance cartridge capacity

indicator to drop some amount. Starter ink tanks are for

rst-time installation. It is recommended that you purchase

replacement ink tanks quickly.

When the print head adjustment is complete, the paper with the

adjustment pattern printed on it is ejected.

Instructions on how to remove paper will be displayed on the

touch screen. Perform the rest of the procedure by following the

instructions.

Important

• Do not operate the release lever until the instruction on

removing paper is displayed on the touch screen. If you

operate the release lever while printing is in progress, the

printing will stop in the middle.

Autres manuels pour imagePROGRAF TM-305

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante

Canon

Canon 2160B002 Manuel utilisateur

Canon

Canon CP-200 Manuel utilisateur

Canon

Canon imagePROGRAF W6400 Manuel utilisateur

Canon

Canon LR1 Manuel utilisateur

Canon

Canon Pixma MG3270 Series Manuel utilisateur

Canon

Canon 2238B002 Manuel utilisateur

Canon

Canon imageCLASS MF5770 Manuel

Canon

Canon PIXMA GM4000 Series Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE DX 717 Series Manuel utilisateur

Canon

Canon S 820 Manuel utilisateur

Canon

Canon CP-220 Manuel utilisateur

Canon

Canon LBP-3000 Manuel utilisateur

Canon

Canon BJC-S520 Manuel utilisateur

Canon

Canon iP90 - PIXMA Color Inkjet Printer Manuel d'installation

Canon

Canon PI}{MA Pro 9000 Serie? Manuel utilisateur

Canon

Canon G3411 Guide de configuration

Canon

Canon Pixma G2430 Manuel utilisateur

Canon

Canon i860 Series Manuel utilisateur

Canon

Canon iPF650 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon Color imageCLASS LBP7200Cdn Manuel utilisateur

Canon

Canon PIXMA MX410 Series Manuel

Canon

Canon imageRUNNER ADVANCE DX C478iZ Guide d'installation

Canon

Canon LBP-810 Manuel utilisateur

Canon

Canon iPF6100 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur

Epson

Epson Stylus Photo PX700W Instructions de montage

Ricoh

Ricoh SP204SF Manuel utilisateur

Star Micronics

Star Micronics futurePRNT TSP100 Manuel utilisateur

Epson

Epson TM-TM88V-i Manuel d'utilisation et d'entretien

Canon imagePROGRAF TM-305 Manuel utilisateur

Manuels Imprimante populaires d'autres marques