Canon Decurler Unit-C1 Manuel utilisateur
Operation guide
Decurler Unit-C1
Copyright and Trademarks
Copyright
Copyright 2016 Océ.
Illustrations and specifications do not necessarily apply to products and services offered in each
local market. No part of this publication may be reproduced, copied, adapted or transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language in
any form or by any means, electronic, mechanical, optical, chemical, manual, or otherwise,
without the prior written permission of Océ.
OCÉ MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE CONTENTS OF THIS
PUBLICATION, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING
WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. OCÉ SHALL NOT BE
LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM THE USE OF THE CONTENTS OF THIS PUBLICATION.
Océ reserves the right to revise this publication and to make changes from time to time in the
content hereof without obligation to notify any person of such revision or changes.
Trademarks
Océ, Océ PRISMA, Océ VarioPrint are registered trademarks of Océ-Technologies B.V. Océ is a
Canon company.
All other trademarks are the property of their respective owners.
Edition 2016-12 US
Contents
Chapter 1
Preface................................................................................................................................. 5
Notes for the reader......................................................................................................................................... 6
Naming Conventions for Accessories (Generic Naming in User Interfaces).............................................. 8
Chapter 2
Use the decurler..................................................................................................................9
Correct Curled Media via the Control Panel.................................................................................................10
Correct Curled Media via the Settings Editor...............................................................................................12
Chapter 3
Troubleshooting................................................................................................................13
Labels inside the Decurler............................................................................................................................. 14
Clear a Paper Jam in the Decurler................................................................................................................ 15
Chapter 4
Specifications.................................................................................................................... 17
Specifications..................................................................................................................................................18
Index...................................................................................................................................19
Contents
3
Canon Decurler Unit-C1
Contents
4
Canon Decurler Unit-C1
Chapter 1
Preface
Notes for the reader
Typography
This manual uses the following typography to indicate elements that are part of the user
interface.
Typography Indicates
[Text between square brackets] Name of a button, tile, setting, value, or other
option of the user interface
< Text between angle brackets > Name of a key on a keyboard
Text displayed in courier font • File path
• Command Prompt comment
[Text]→[displayed in]→[menucascade] Names of options to be used in a fixed order
Safety symbols
Before using this product, make sure you have read and understood the safety information
belonging to the product. Find the safety information on
http://downloads.oce.com
. Also be sure
to follow all warnings and instructions marked on the product.
This manual uses the following safety symbols to indicate hazards and precautions.
Symbol Type of symbol Indicates
WARNING Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use
the machine safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
This indication can concern hazards that have a specific CAU-
TION symbol. The 'hot surface', 'electric shock', 'moving
parts' and 'laser beam' cautions are listed below.
CAUTION Hot surface
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
CAUTION Electric shock
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
CAUTION Moving parts
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
CAUTION Laser beam
Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions. 4
Notes for the reader
6Chapter 1 - Preface
Canon Decurler Unit-C1
Symbol Type of symbol Indicates
IMPORTANT Indicates operational requirements and restrictions. Be sure
to read these items carefully to operate the machine correctly
and to avoid damaging the machine or property.
NOTE Indicates a clarification of an operation or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Body protection symbols
This manual uses the following body protection symbols to indicate that it is important to protect
yourself before performing a specific task or action.
Symbol Type of symbol Indicates
IMPORTANT Hand protection
Wear the mentioned type of gloves when you perform this
task or action.
IMPORTANT Eye protection
Use the mentioned type of eye protection when you perform
this task or action.
IMPORTANT Body protection
Wear the mentioned type of body protection when you per-
form this task or action.
IMPORTANT Foot protection
Wear the mentioned type of safety footwear when you per-
form this task or action.
Notes for the reader
Chapter 1 - Preface 7
Canon Decurler Unit-C1
Naming Conventions for Accessories (Generic Naming
in User Interfaces)
Generic Naming of Accessories in User Interfaces
To improve the readability of texts in User Interfaces of control panels and software, the
accessories are generally referred to by their function. The table below shows the naming
conventions for accessories (commercial product names and the generic terminology used in
User Interfaces). Some accessories listed below may not be available in certain markets.
NOTE
In some cases, there is only 1 name for more modules. The reason is that a configuration can
only contain 1 of the available types of modules.
Conversion table for commercial names versus generic terminology in User Interfaces
Commercial product name: In UI, printer driver and software referred to
as:
Finisher-W1 [Stacker/stapler]
Booklet Finisher-W1 with saddle press func-
tionality
[Stacker/stapler]
Professional Puncher-B1 [Puncher]
GBC® eWire™ [eWire]
Paper Folding Unit-J1 [Folder]
Document Insertion Unit-N1 [Inserter]
High Capacity Stacker-F1 [Stacker]
High Capacity Stacker-G1 [Stacker]
High Capacity Stacker-H1 [Stacker]
Booklet Trimmer-F1 [Trimmer]
Two-Knife Trimmer-A1 [Trimmer]
Duplex Color Image Reader Unit-L1 [Scanner]
Decurler Unit-C1 [Decurler]
BLM600 [Booklet maker]
Output tray [Copy tray]
Naming Conventions for Accessories (Generic Naming in User Interfaces)
8Chapter 1 - Preface
Canon Decurler Unit-C1
Chapter 2
Use the decurler
Correct Curled Media via the Control Panel
Introduction
This procedure describes how to correct curled media via the control panel. Make test prints on
the adjusted media to check the curl.
IMPORTANT
You are advised to make small increments to avoid paper jams.
NOTE
You can also correct curled media via the Settings Editor.
NOTE
If the curl correction values are different for LEF and SEF, you must create two media in the
media catalog. One media for LEF and another media for SEF.
NOTE
You can correct curled media while the system prints a job. The curl is corrected after a couple
of sheets.
When you want to correct the curled media immediately:
1. Stop the active job on sheet boundary.
2. Correct the curled media.
3. Resume the job.
The curl is corrected immediately after you resumed the job.
Procedure
1. Touch [System] -> [Media].
2. From the [Media catalog], select the media you want to correct.
3. Touch [Curl correction].
4. Define the correction.
When the media curls upward, adjust downward (+).
When the media curls downward, adjust upward (-).
NOTE
When you print a 1-sided job face up, select [Output face up].
When you print a 1-sided job face down, select [Output face down].
When you print a 2-sided job, select [2-sided output].
5. Touch [OK].
You can also correct curled media via the [Trays] view.
1. Touch [Trays].
2. Select the tray with the media you want to correct.
Correct Curled Media via the Control Panel
10 Chapter 2 - Use the decurler
Canon Decurler Unit-C1
Table des matières
Autres manuels Canon Accessoires pour imprimantes
Canon
Canon Multi Function Professional Puncher-A1 Manuel d'utilisation et d'entretien
Canon
Canon External 2/3 Hole Puncher-B1 Manuel utilisateur
Canon
Canon Inner Finisher-K1 Manuel utilisateur
Canon
Canon Cassette Feeding Module-K1 Manuel utilisateur
Canon
Canon iP4680 Manuel utilisateur
Canon
Canon Super G3 FAX Board-AH1 Manuel utilisateur
Canon
Canon imagePROGRAF RU-42 Manuel utilisateur
Canon
Canon Puncher Unit-P1 Manuel utilisateur
Canon
Canon SELPHY BU-20 Guide de configuration
Canon
Canon Inner Finisher Additional Tray-A1 Manuel de référence
Canon
Canon imagePROGRAF SS-41 Manuel utilisateur
Canon
Canon STAPLER SORTER-L1/MS-C1 Manuel utilisateur
Canon
Canon BJC-85 Manuel utilisateur
Canon
Canon Puncher Unit-N1 Manuel de service
Canon
Canon ZDJ-S01 Manuel utilisateur
Canon
Canon Cassette Heater Unit 27 Manuel utilisateur
Canon
Canon Cassette Feeding Module-J1 Manuel d'utilisation et d'entretien
Canon
Canon PH-72 Manuel utilisateur
Canon
Canon BW Printer Kit-G2 Manuel d'utilisation et d'entretien
Canon
Canon Finisher-T1 Manuel utilisateur
