Canon TZ-5300 Manuel utilisateur

QT6-4095-V01 PRINTED IN XXXXXXXXXXXXXXXX © CANON INC. 2021

Setup Guide

Read this manual before attempting to operate the printer. Keep this manual for future reference.

Furthermore, in order to ensure that this product is used safely, you should always also read the “Quick Guide” (separate

manual).

ENGLISH

安裝指南

請先閱讀本手冊再嘗試操作印表機。妥善保存本手冊供後續參考之用。

此外，為了確保安全使用本產品，您也應務必閱讀 "快速指南"（個別手冊）。

繁體中文

ค�ำแนะน�ำกำรติดตั้ง





ภำษำไทย

Petunjuk Pengesetan

Bacalah petunjuk ini sebelum mencoba mengoperasikan pencetak. Simpanlah petunjuk ini untuk rujukan di waktu

mendatang. Lebih lanjut, untuk memastikan bahwa produk ini digunakan dengan aman, Anda harus selalu membaca

"Petunjuk Ringkas" (petunjuk terpisah).

BAHASA INDONESIA

설치 가이드

프린터를 조작하기 전에 이설명서를 읽으십시오. 나중에 참조할 수있도록 이설명서를 잘보관해 두십시오.

또한 이제품을 안전하게 사용하려면 "퀵가이드"(별도 설명서)도읽어야 합니다.

한국어

RMC (Regulatory Model Code) : K10540

Overview of Setup Installation Space

Set up the printer using the following procedure. If an error message appears

during setup or other problems occur, refer to "Responding to Messages" on

p. 16.

Removing the Packaging Material Page 4

Turning On the Printer Page 4

Installing the Ink Tanks Page 6

Installing the Print Head Page 8

Installing the Paper Output Supports

and Top Output Guides Page 10

Preparing the Basket Page 12

Selecting the Method of Connecting

to Your Computer Page 13

Installing the Software on Your

Computer Page 14

About the Paper Handling Label Page 15

Loading Paper Page 15

Storing Accessories Page 15

Printing From a Smartphone or Tablet Page 15

Displaying the Online Manual Page 15

Trademarks Page 15

Responding to Messages Page 16

When installing the printer, it is recommended that you secure the following

space around the printer.

Important

●This is the space when using the paper output supports and top output

guides.

●The space required in front of the printer differs depending on whether

the basket is used.

■TZ-5300

Required space* (W x D x H)

1,948 × 2,013 × 1,478 mm

Required space** (W x D x H)

1,948 × 1,680 × 1,478 mm

600 mm**

600 mm*

200 mm

50 mm

120 mm

* When using the basket

** When the basket is stored

ENGLISH

Package Contents

Check that the following included accessories are contained in the package. Note that a cable to connect the printer to a computer is not provided with the

printer.

Note

●Some of the included accessories are not described in this manual. Store them along with the other accessories as they are required for other functions.

●For instructions on the included items not described in this manual, refer to the Online Manual by following the instructions in "Displaying the Online Manual"

on p. 15.

h i j

e fc d

bmn

aPrinter

bSetup Guide (this manual)

cInk tanks (5 pieces)

dPrint head

eQuick Guide

fSet of CD-ROMs

gPower cord

hBasket support bar

i3-inch paper core attachments (4 pieces)

jHolder stoppers (2 pieces)*

kPaper output supports (3 pieces)

lTop output guides (3 pieces)

mAllen wrench and screws (6 pieces) for attaching the top

output guides and paper output supports

nPaper handling label

oBasket cloth

pBasket arm

* This is used when loading roll paper. For details, refer to the Online Manual.

Manuals Included with This Printer

Setup Guide (this manual)

Describes how to setup the printer.

Quick Guide

Contains information related to warnings for using this printer safely and information related to replacing paper, ink tanks, and the print head.

Online Manual (Electronic Manuals)

This manual describes advanced usage of the printer such as paper saving tips, how to print a poster and banner with the supplied software and print quality

adjusting method, in addition to the basic instructions for printing on roll paper or cut sheet. To view the Online Manual, refer to "Displaying the Online Manual"

(p. 15).

Handling Cautions

Caution

●Move the printer to the installation location and begin the setup.

●When moving the printer, check that all of the printer covers and trays are closed before moving.

When Lifting the Printer

●When lifting the printer, have 4 people on each side firmly grasp the carrying grips (the area shown shaded in the diagram).

Holding any other areas may damage the printer. Take care when handling the printer as it is very heavy.

①

❶❷❸

❹

②

③

④

❶

❷

❸

❹

①

❶

②❷

③

❸

④❹

Gently support the front face

with your left hand.

Gently support the front face

with your right hand.

Removing the Packaging Material

Remove the tape and other packaging material. Remove the tape affixed to the roll holder.

Turning On the Printer

Open the top cover.

Remove the tape and cushioning

material affixed to the inner cover.

Open inner cover.

Pull up and remove the belt stopper.

●Keep the belt stopper for future use. You will need it in case you

move the printer to another location.

Note

●The belt stopper can be stored in the accessory drawer. (P.15)

Remove the tape.

●Peel off the tape affixed to the carriage, and then remove the

cushioning material.

Rotate the protective material in the A direction to

remove it.

Move the carriage in the direction of the arrow and

remove the protective material .

Close the inner cover.

Close the top cover.

Connect the power cord to the printer.

●Insert the power cord into the power connector on the rear of

the printer.

Plug the power cord into the outlet, and then turn on the

printer.

When the language selection screen appears on the

touch screen, select and gently tap a language with

your finger. Then, if the screen for selecting a time zone

appears, select and tap your region.

When a message prompting you to start the setup

appears on the touch screen, tap OK.

Installing the Ink Tanks

Instructions on ink tank installation are shown on the touch screen. Install the ink tanks as instructed. If the ink tank is cold, allow it to adjust to room temperature

before attaching it to the printer.

Open the ink tank cover.

Release the ink tank lock lever of the

color you are installing.

●While pressing the button at the

position (B), lift up the handle part (A)

towards you.

With it in this state, pull the ink tank

lock lever up.

Continue pulling until the entire ink tank lock lever is

tilted towards you.

●Make sure the ink tank lock lever stays in this position.

Shake each ink tank gently 7 or 8 times before opening its

pouch.

Important

●Failure to shake the ink tanks may

result in reduced print quality because

ink ingredients have settled on the

bottom of the tank.

Open the pouch and remove the ink tank.

Important

●Never touch the ink outlets or metal contacts (the area shown shaded in the diagram).

Touching these parts may cause stains, damage the ink tank, and affect print quality.

●Avoid dropping the ink tank after removing it from the pouch.

Otherwise, ink may leak and cause stains.

●Do not remove ink tanks to shake them after they have been mounted.

Doing so may cause ink to spill.

Check that the color of the ink tank is the same as the

color displayed on the label in the printer, and insert the

ink tank into the holder in the orientation shown in the

diagram.

●Insert with the ink tank label facing up and ensuring that the

text on the label is not upside-down.

Match the color of the ink tank label to

the color of the label in the printer

Lift up the ink tank lock lever once and then push it

down.

Firmly push down the handle part of the ink tank lock

lever all the way in.

Make sure the ink lamp lights red.

Important

●If the ink lamp does not light, repeat steps 2 to 4and 8to 9.

Repeat steps 2 to 10 to install each of the ink tanks.

Close the ink tank cover.

When the screen for confirming installation of the ink

tank appears, tap OK.

Important

●Do not open the top cover or inner cover. An error may occur. If

an error occurs, turn off the power, close the top cover and inner

cover, and then turn the power on.

Installing the Print Head

Instructions are now shown on the touch screen regarding print head installation. Install the print head by following the instructions.

When the Open the top cover. appears on the touch

screen, open the top cover.

Important

●If the top cover is opened before Open the top cover. appears

on the touch screen, an error may occur. If an error occurs, turn

off the power, close the top cover, then turn the power on.

Open the inner cover.

Important

●Do not move the carriage (the area enclosed by a circle in the

diagram). If you accidentally move it, temporarily close the inner

cover and top cover and it will return to its original position.

Check that the triangle mark on the angle adjustment

lever is aligned with the red ■. If they are not aligned,

move the angle adjustment lever up or down to align it

with the ■.

Triangle mark

Red ■

Tilt the print head lock lever towards you.

Open the print head locking cover

by following the

instructions on the screen and tap OK. Do not touch the

electrical contacts of the carriage.

Do not touch here

Grasp the print head as shown in the diagram and

remove it from the bag.

Hold here

Autres manuels pour TZ-5300

Table des matières

Langues :

Autres manuels Canon Traceur

Canon

Canon image Prograf iPF780 Series Manuel utilisateur

Canon

Canon iPF750 series Manuel utilisateur

Canon

Canon imagePROGRAF TM-200 Guide de configuration

Canon

Canon iPF710 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon iPF825 Manuel utilisateur

Canon

Canon iPF8000S - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon iPF720 - imagePROGRAF Color Inkjet Printer Manuel utilisateur

Canon

Canon imagePROGRAF BU-03 Manuel utilisateur

Canon

Canon iPF800 Series Manuel utilisateur

Canon

Canon imagePROGRAF TM Series Manuel utilisateur

Canon

Canon imagePROGRAF TX-4100 Guide de configuration

Canon

Canon imagePROGRAF IPF9000S Manuel utilisateur

Manuels Traceur populaires d'autres marques

MUTOH

MUTOH Kona 760 Manuel utilisateur

HP 7475a Manuel utilisateur

Vulcan-Hart

Vulcan-Hart FC-500VC Manuel utilisateur

Roland

Roland TrueVIS VG-640 Manuel du propriétaire

Furuno

Furuno RP-180 Manuel utilisateur

Roland

Roland VersaCamm SP-540V Manuel utilisateur

MIMAKI

MIMAKI CF2 Series Manuel utilisateur

Ioline

Ioline Summit Manuel utilisateur

Summa

Summa S CLASS Manuel utilisateur

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuel utilisateur

Furuno

Furuno RP-17 Manuel utilisateur

HP 7470A Manuel utilisateur

SII

SII LP-1010 Manuel utilisateur

Great Computer

Great Computer JII-61 Manuel utilisateur

Roland

Roland VersaUv LEF - 12i Manuel utilisateur

Lectra

Lectra Alys 120 Manuel utilisateur

MUTOH

MUTOH Ultima SC-850D Manuel utilisateur

Skycut

Skycut D Series Manuel utilisateur