Canon PIXMA MP990 Instructions d'installation et d'entretien

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Mac OS

Navigation Tips for Macintosh Users

To navigate this guide, please use the arrows on the MAC

keyboard or use the PAGE UP and Page DOWN keys.

Page UP

Page DOWN

LEFT

DOWN

RIGHT

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Mac OS

Preparing to Connect My Multifunction to My Network 4

Network Requirements 4

Important Information You Need Before Adding Your Multifunction 5

Adding Your Multifunction to the Network 6

Confirm Connection Status 10

Downloading & Installing the Drivers 13

Download ingthe Driver 13

Installing the Driver 16

Adding the Machine 22

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to your device's instruction manual or contact its manufacturer.

•The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection.

Preparing to Connect My Multifunction

To My Network

Preparing to Connect My Multifunction

To My Network

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password required to set to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

Adding Your Multifunction to Your Network

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and

then press the OK button.

*Easy-Scroll Wheel location varies according to model.

MP640 pictured in examples below.

Step Two

Select Wireless LAN setup, and then press the OK button.

Adding Your Multifunction to Your Network

Step Four

Select Easy settings, and then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the Wi-Fi lamp**

(B) lights blue.

**Wi-Fi lamp location varies according to model.

Step Six

When one of the following screens is displayed, enter the network

key you wrote down, then press the OK button.

If the following screen is not displayed, go to Step Eight.

Use the Easy-Scroll Wheel to select the character. Use the button

to move the cursor to the right.

IMPORTANT: Enter upper and lower case letters of the alphabet

correctly.

Adding Your Multifunction to Your Network

Step Five

Select the access point name you wrote down, then

press the OK button.

NOTE: If you are living in an apartment, nearby access

points in use may be detected.

Adding Your Multifunction to Your Network

Step Eight

When the completion screen appears, press the OK button, then

press the HOME*** button (C).

***HOME button location varies depending on model.

The standby screen returns.

NOTE: If Failed to connect to the access point. appears, press the OK

button, make sure that the network key is correct, then enter it again. If a

connection still cannot be established, refer to the printed manual: Network

Setup Troubleshooting.

Step Seven

Make sure that the network key is correct, and

then press the OK button.

Step One

Press the HOME*** button (A), select Settings using the

Easy-Scroll Wheel (B), and then press the OK button.

***HOME button location varies depending on model.

IMPORTANT: Confirm connection status after installing

the machine in the target location.

Adding Your Multifunction to Your Network

Confirm Connection Status

Step Two

Select Device settings, and then press the OK button.

Autres manuels pour PIXMA MP990

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon PIXMA MG5600 Series Manuel utilisateur

Canon

Canon Color imageCLASS MF8350Cdn Guide de sécurité

Canon

Canon Color imageCLASS MF644Cdw Manuel utilisateur

Canon

Canon PIXMA MP990 Manuel utilisateur

Canon

Canon PIXMA MP620 series Manuel

Canon

Canon imageRUNNER Advance C2030i Instructions de montage

Canon

Canon FAXPHONE L170 Manuel

Canon

Canon PIXMA MX512 Manuel utilisateur

Canon

Canon PIXMA MP960 Manuel

Canon

Canon MF746Cx Manuel utilisateur

Canon

Canon imageRunner 3300E Manuel utilisateur

Canon

Canon MX530 series Guide de configuration

Canon

Canon PIXMA MX882 Series Manuel

Canon

Canon imagerunner advance 4551i Manuel utilisateur

Canon

Canon imageRunner 2204F Manuel utilisateur

Canon

Canon ImageCLASS MF3240 Series Guide de configuration

Canon

Canon imageCLASS MF5950dw Instructions d'installation

Canon

Canon IMAGERUNNER 1670F Manuel utilisateur

Canon

Canon ImageCLASS MF5730 Manuel

Canon

Canon MultiPASS F30 Manuel utilisateur

Canon

Canon MP730 - MultiPASS Color Inkjet Manuel

Canon

Canon imageCLASS MF4880dw Instructions de montage

Canon

Canon imageRUNNER C3480 Fiche d'information produit

Canon

Canon imagerunner advance C5550i Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur