Canon PIXMA MP990 Instructions d'installation et d'entretien

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Windows OS

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Windows OS

Preparing to Connect My Multifunction to My Network 3

Network Requirements 3

Important Information You Need Before Adding Your Multifunction 4

Adding Your Multifunction to the Network 5

Confirm Connection Status 9

Downloading & Installing the Drivers 12

Downloading the Driver 12

Installing the Driver 15

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to your device's instruction manual or contact its manufacturer.

•The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection.

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password is required to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

Adding Your Multifunction to Your Network << Previous Next >>

Adding Your Multifunction to Your Network

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and

then press the OK button.

*Easy-Scroll Wheel location varies according to model.

MP640 pictured in examples below.

Step Two

Select Device settings, then press the OK button.

Adding Your Multifunction to Your Network << Previous Next >>

Step Four

Select Change wireless / wired, then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the Wi-Fi lamp**

(B) lights blue.

**Wi-Fi lamp location varies according to model.

Step SIx

When one of the following screens is displayed, enter the network

key you wrote down, then press the OK button.

If the following screen is not displayed, go to Step Eight.

Use the Easy-Scroll Wheel to select the character. Use the button

to move the cursor to the right.

IMPORTANT: Enter upper and lower case letters of the alphabet

correctly.

Adding Your Multifunction to Your Network << Previous Next >>

Step Five

Select the access point name you wrote down,

then press the OK button.

NOTE: If you are living in an apartment, nearby access

points in use may be detected.

Adding Your Multifunction to Your Network << Previous Next >>

Step Eight

When the completion screen appears, press the OK button, then

press the HOME*** button (C).

***HOME button location varies depending on model.

The standby screen returns.

NOTE: If Failed to connect to the access point. appears, press the OK

button, make sure that the network key is correct, then enter it again. If a

connection still cannot be established, refer to the printed manual: Network

Setup Troubleshooting.

Step Seven

Make sure that the network key is correct, and

then press the OK button.

Step One

Press the HOME*** button (A), select Settings using the

Easy-Scroll Wheel (B), and then press the OK button.

***HOME button location varies depending on model.

IMPORTANT: Confirm connection status after installing

the machine in the target location.

Adding Your Multifunction to Your Network << Previous Next >>

Confirm Connection Status

Step Two

Select Device settings, and then press the OK button.

Adding Your Multifunction to Your Network << Previous Next >>

Step Three

Select LAN settings, and then press the OK button.

Step Four

Select Confirm LAN settings, then press the OK button.

Autres manuels pour PIXMA MP990

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon imageRUNNER 1025 Instructions de montage

Canon

Canon PIXMA MG6420 Manuel utilisateur

Canon

Canon PIXMA MX7600 Manuel

Canon

Canon PIXMA MP750 Manuel utilisateur

Canon

Canon imageCLASS X MF1127C Manuel utilisateur

Canon

Canon PIXMA MX350 Manuel utilisateur

Canon

Canon PIXMA MX860 series Instructions d'installation et d'entretien

Canon

Canon imagePROGRAF TX-2000 Manuel du propriétaire

Canon

Canon TS6420a Guide de configuration

Canon

Canon MultiPASS F60 Guide de sécurité

Canon

Canon imageRUNNER 2016 Series Manuel utilisateur

Canon

Canon PIXMA MX420 Series Manuel

Canon

Canon iR3300 Series Manuel utilisateur

Canon

Canon imageRunner 2022 Manuel utilisateur

Canon

Canon imageCLASS MF5770 Manuel utilisateur

Canon

Canon PIXMA MP830 Manuel utilisateur

Canon

Canon PIXMA MG6350 Manuel utilisateur

Canon

Canon MultiPASS F50 Instructions d'installation et d'entretien

Canon

Canon Pixma MG2500 Series Guide de configuration

Canon

Canon imageRUNNER ADVANCE DX 717iZ Manuel utilisateur

Canon

Canon PIXMA MG6220 Installing Manuel utilisateur

Canon

Canon Color imageCLASS MF8170c Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE 8105 Manuel utilisateur

Canon

Canon ImageRunner 5050 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur