Canon PIXMA MG3220 series Manuel utilisateur

PIXMA MG3200

Setup Guide

series

Setup Guide

This guide provides information for setting up a network connection for the printer.

Network Connection

Wireless Connection

Preparation for Connection

Printer Setup

Connection Using WPS

Troubleshooting

Network Connection

Wireless Connection

aPreparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the LED (Light Emitting Diode) is lit as shown in the illustration below.

Notes on Wireless Connection

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to the manual of your network device or contact its manufacturer.

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For ofﬁ ce use, consult your network administrator.

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

bPrinter Setup

1. Press and hold the Maintenance button (A) on the printer (for about 5 seconds).

2. Make sure that the LED ﬂ ashes as shown in the illustration below.

•

cConnection Using WPS

1. Press the Fit to Page button (A).

2. Make sure that the LED ﬂ ashes as shown in the illustration above, then press and hold the WPS

button on the access point within 2 minutes.

For details on pressing the WPS button, refer to the access point manual.

The (blue) Wi-Fi lamp on the printer ﬂ ashes while searching for or connecting to the access point.

3. When wireless connection is complete, the LED lights up for about 3 seconds, then changes to "1" as

shown in the left illustration below. Make sure that the (blue) Wi-Fi lamp on the printer is lit.

The network connection setup is now complete.

Troubleshooting

WPS

E > 2 > 1

The error appears when wireless connection setup was not completed within 2 minutes after pressing the WPS

button.

Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back

on.

E > 2 > 3

The screen appears when multiple access points are detected. Wait for a while, then conﬁ gure WPS settings again.

Press the WPS button on only one access point.

E > 2 > 4

The screen appears when an error occurs.

Check the access point settings, then conﬁ gure WPS settings again.

For details on how to check the settings of the access point, refer to the manual supplied with the access point or

contact its manufacturer.

To conﬁ gure WPS settings again

1. Press the Color button (A).

2. Press and hold the Maintenance button on the printer (for about 5 seconds).

3. Make sure that the LED ﬂ ashes as shown in the illustration above.



•



Autres manuels pour PIXMA MG3220 series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon PIXMA MG5410 Manuel utilisateur

Canon

Canon CFX-L4500 IF Manuel utilisateur

Canon

Canon PIXMA MX455 Series Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE DX 717iZ Manuel utilisateur

Canon

Canon imageCLASS MF5550 Guide de démarrage rapide

Canon

Canon FAX-L400 Manuel utilisateur

Canon

Canon imageRUNNER ADVANCE C5255 Manuel utilisateur

Canon

Canon 7994a001 Manuel utilisateur

Canon

Canon iR4570 Series Manuel utilisateur

Canon

Canon PIXMA MX522 Fiche d'information produit

Canon

Canon 5119B001AA Instructions de montage

Canon

Canon MX450 series Guide de configuration

Canon

Canon MX450 series Guide de configuration

Canon

Canon imagePRESS C800 Series Manuel utilisateur

Canon

Canon iR1020 Series Manuel utilisateur

Canon

Canon MG5200 series Manuel utilisateur

Canon

Canon MP730 - MultiPASS Color Inkjet Manuel utilisateur

Canon

Canon PIXMA MP287 Manuel utilisateur

Canon

Canon PIXMA MX420 Series Manuel utilisateur

Canon

Canon MultiPASS C100 Manuel utilisateur

Canon

Canon 3743B002 Guide de l'utilisateur

Canon

Canon PIXMA MP495 Series Instructions d'installation et d'entretien

Canon

Canon imageCLASS MF5630 Manuel utilisateur

Canon

Canon iR6570 series Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur