Canon ImageCLASS D340 Manuel

Setup Sheet

Thank you for purchasing the Canon imageCLASS D340.

To get your machine ready for use, please follow the instructions in this Setup Sheet before referring to any

other documentation.

Unpack the machine and its components.

Check that you have the following:

IMPORTANT

• Save your sales receipt for proof of purchase in case your machine requires warranty

service.

NOTE

•Aprinter cable is not included.You need a USB cable (less than 16.4ft./5m) to connect your

machine to a computer.

●Machine

● Document feeder tray ●Canon S35 Cartridge

●Cassette/Multi-purpose tray

●POWER CORD

●DOCUMENTATION

(Setup Sheet, Basic Guide, Registration Card, Limited Warranty Card)

●CD-ROM

Removing Shipping Materials

1Place the machine on a flat surface.

2Remove the shipping tapes on the machine and cassette/multi-purpose tray.

NOTE

•DO NOT remove the transparent USB label

at this stage

3Open the ADF to remove the shipping material , then open the platen

glass cover to remove the inner protection sheet .

Installing the Cassette and Document Feeder Tray

1Raise the cassette slightly toward the machine, and align the hooks on both

sides of the cassette with the guides in the machine, then install the cassette

into the machine as far as it will go 1.Then gently lower the cassette 2.

2Insert the tabs on the document feeder tray into the holes on the document

feeder until it clicks.

NOTE

•Install the cassette so that there is no space between the cassette and the feeding slot.

Transparent

USB label

Left side view

Connecting the Power Cord

When the power cord is plugged into the machine and into the wall outlet, the machine is turned on.

There is no separate ON/OFF power switch. Once connected, the machine needs to warm up before

you can use it.The LCD displays PLEASE WAIT, then INSTALL CARTRIDGE. The LCD returns to the

standby display when you install the cartridge and load paper in the cassette or multi-purpose tray.

Loading Paper in the Cassette

1Load the paper stack in the cassette.

•Insert the paper stack into the cassette

as far as it will go.

2Slide the width guides and the length

guide to fit the size of the paper stack.

•Adjust the guides so that there is no space

between the guides and the paper.

NOTE

•Make sure the paper stack does not exceed the

width and length guides’ claws.

3Set the multi-purpose tray on top of the

cassette.

NOTE

•Insert the power cord straight into the power cord

connector on the left side of the machine.

Do not insert it at an angle. Otherwise, the machine

may not be properly connected to the power source

and may not turn on. If this happens, disconnect the

power cord, and reconnect it correctly after a minute

or more.

•When disconnecting or connecting the power cord, be

sure to unplug or plug the power cord from the wall

outlet, not from the power cord connector on the

machine.

Installing the Cartridge

1Remove the new cartridge from its protective bag.

NOTE

•Save the protective bag.You may need it later when you remove the cartridge.

2Rock the cartridge 5 or 6 times to distribute the toner evenly.

NOTE

•Always hold the cartridge as shown so that the side with the instructions are facing upward. Do not

forcefully move or push the protective shutter of the drum in any way.

3Place the cartridge on a flat and stable surface, grip the sealing tape tab and

snap it in the direction shown below. Make sure that the tab itself is detached

from the cartridge.

4While grasping the cartridge firmly, slowly pull the sealing tape tab with the

other hand to remove the sealing tape completely. Discard the tape.

IMPORTANT

•Be sure to remove the sealing tape completely.

Otherwise, toner will not be supplied to the machine

and no image or text will be transferred to the page.

•To avoid breaking the sealing tape when removing,

pull the tab straight out. Do not pull it out at an

upward or downward angle.

5Open the right cover.

Right cover

Tab

Drum protective shutter

Instructions

Turn over to

continue

Turn over to

continue

6Hold the cartridge and position the arrow mark on the cartridge towards the

inside of the machine shown below.

7Align the projections on both sides of the cartridge to the guides in the

machine (location 1) and gently slide the cartridge into the machine until the

right cover slightly rises up (location 2).

IMPORTANT

•The right cover moves simultaneously with the action of the cartridge. Do not push the

cartridge farther than the location 22.Doing so will result in catching your hand in the

right cover.

8Close the right cover, and the cartridge will be set in place (location 3).

Installing User Software (Windows 98/Me/2000/XP)

IMPORTANT

•Before you can print, you must install the user software on your computer.

Screen shots in the following installation procedures are for Windows 98.

1Make sure the USB cable is NOT connected to your machine and computer.

IMPORTANT

•If the Plug and Play is automatically carried out and the Found New Hardware Wizard

appears, click Cancel, and follow this procedure.

2Insert the CD-ROM into your CD-ROM drive.

3If AutoRun is enabled, the installation starts automatically.

NOTE

•If installation does not start automatically, choose Run... from the Start Menu,Type

D:\Drivers\us_eng\prnsetup\Setup.exe (if your CD-ROM drive is drive D:) in the command line

and click OK.

4Click Next> .

5When the License Agreement appears, check the contents. Select I accept the

terms in the license agreement,then click Next> .

NOTE

•The message recommending to restart your computer

may appear under some operating systems. In this case,

continue installing after restarting your computer.

6Check Install Printer Driver through a USB Connection,then click Next> .

When the screen (on the upper right) appears, follow the procedure below

6-1 Be sure to remove the transparent USB label .

6-2 Connect the USB cable to the machine and computer.

The program will start installing the Printer Driver automatically.

7When the following screen appears, select Yes, I want to restart my computer now.

Then click Exit.

USB interface connection

Reading Electronic Manuals

To see the guides, proceed as follows.

1Insert the CD-ROM into your CD-ROM drive.

2On the Windows desktop, click Start,and then Click Run...

3In the Run dialog box, type D:\Manuals and click OK ( where D: is the CD-ROM

drive containing the installation disk ).

The Printer Guide is available in the manuals folder.

NOTE

•If you do not have Adobe Acrobat Reader installed on your computer, follow the procedure below

to install it.

1Insert the CD-ROM into your CD-ROM drive.

2On the Windows desktop, click Start, and then Click Run...

3In the Run dialog box, type D:\Acrobat and click OK (where D: is the CD-ROM

drive containing the installation disk ).

4Double-click the .exe file in the Acrobat folder.

Part no. HT3-2120-000-V.2.0

Canon is a registered trademark of Canon Inc.

All other products and brand names are registered

trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

XXXXXX PRINTED IN CHINA

Autres manuels pour imageCLASS D340

Table des matières

Autres manuels Canon Imprimante tout-en-un

Canon

Canon Pixma MG2400 Series Guide de configuration

Canon

Canon ImageRunner iR8500 Series Instructions de construction

Canon

Canon G4000 series Guide de configuration

Canon

Canon MF7280 - ImageCLASS B/W Laser Manuel utilisateur

Canon

Canon PIXMA MP470 Manuel utilisateur

Canon

Canon 2918B002 Manuel utilisateur

Canon

Canon MP980 series Manuel utilisateur

Canon

Canon PIXMA MX340 Series Manuel utilisateur

Canon

Canon IR5000 - iR B/W Laser Comment utiliser

Canon

Canon imageCLASS MF269dw Manuel utilisateur

Canon

Canon MP730 - MultiPASS Color Inkjet Manuel

Canon

Canon MF515 Series Manuel utilisateur

Canon

Canon PIXMA MX870 Series Manuel utilisateur

Canon

Canon imageRUNNER 6570 Instructions d'installation et d'entretien

Canon

Canon Pixma MG2500 Series Guide de configuration

Canon

Canon IMAGERUNNER 2016 Manuel utilisateur

Canon

Canon PIXMA MP640 Manuel utilisateur

Canon

Canon PIXMA MP600 Manuel utilisateur

Canon

Canon imageRunner iR2270 Manuel utilisateur

Canon

Canon MG5700 Series Guide de configuration

Canon

Canon Pixma MP800R Manuel utilisateur

Canon

Canon FaxPhone L120 Guide de configuration

Canon

Canon imageRUNNER ADVANCE C5255 Manuel utilisateur

Canon

Canon iR5075 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur

Oce

Oce VarioLink 5022 Manuel utilisateur

Canon imageCLASS D340 Manuel

Manuels Imprimante tout-en-un populaires d'autres marques