Camsat CDS-5IPmini Manuel utilisateur
External wireless , miniature system
to transmit images and sound
IP cameras HD and UHD in the band 5.1 - 5.8 GHz
mini
User manual
www.camsat.comwww.camsat.com
Thank you for choosing the CDS-5IPmini. We trust that its unique features will come in very
handy.
Please, read this instruction manual to ensure safe operation and maximise efficiency of
the device.
The contents of this manual comprise proprietary information of CAMSAT and are intended
only for use by purchasers of the equipment described herein.
In order to copy or use any part of this manual for purposes other than the application or
maintenance of the described equipment, it is required that the customer should first obtain
a written consent from CAMSAT.
1EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
Table of contents
Safety and maintenance tips...............................................................................................
Contents................................................................................................................................
1. Basic information...............................................................................................................
2. Description of the connectors and LED indicators.................................................................
System configuration............................................................................................................
1. Logging into the system....................................................................................................
2. Factory settings.................................................................................................................
3. Menu structure...................................................................................................................
4. Module assembly on the pole...........................................................................................
5. Connection to the system.................................................................................................
6. First system start-up.........................................................................................................
7. Scanning the usage of operation channels....................................................................
8. Radio transmission security............................................................................................
9. External antenna connection...........................................................................................
10. List of available frequencies..........................................................................................
11. Table with technical parameters...................................................................................
12. Instructions for combining the latest modules CDS-5IP mini with previous..............
generation CDS-5IP on one installation.
General warranty terms......................................................................................................
Device disposal...................................................................................................................
3
5
5
5
6
6
6
6
7
8
8
13
14
14
15
16
17
19
20
I
II
III
IV
V
2EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
I. Safety and maintenance tips
Safety symbols
The warning about a potential electric shock due to high voltage inside the
product's casing.
In order to safely use our device, you should read and observe the tips contained
in this instruction manual.
The CDS-5IPmini module is maintenance-free. We recommend installing it on a
stable structure and connecting its power cables in a manner which would prevent
them from being accidentally damaged by the operator or any bystanders.
Note: Essential information
Note: This device can operate within the frequency and power ranges which
might be contradictory to laws applicable in selected countries.
The device is suitable for use in the European Union.
This device has been designed and manufactured with the utmost care for the safety of
its installers and users. For safety reasons, observe all the guidelines in this manual
and peripheral devices' manuals, such as the PC or IP camera.
Before installing the device, carefully read the entire instruction manual.
Ensure safe working conditions. The user's own modifications of the device will prevent
its legal use and render the warranty null and void. The device has passed through the
mandatory compliance assessment and it meets basic requirements in the European
New Approach Directives. The product is CE-marked.
Do not approach the device when it is on at the distance below 30cm.
Safety tips
!
!
3EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
4EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
This device meets requirements of the European directive on radio equipment, tele-
communications terminals as well as on their mutual identification and compatibility
(Directive 1999/5/CE of the European Parliament and the Council of Europe, March
1999).
The CDS-5IPmini module is compliant with provisions related to the safety in using
electrical devices. Observe the following guidelines:
the power outlet must be earthed in compliance with applicable provisions,
before transferring the device or performing any other technical operations, discon-
nect the power supply,
do not use any damaged or worn power supply cables, as they pose a threat to the
user's safety,
installation works must be performed by sufficiently qualified technicians,
do not use the device in locations where flammable substances are kept,
secure the device so that children or unauthorised persons should
not gain access to it,
make certain that the device has been reliably fixed,
the device is off only after disconnecting its power supply cables and the cables
between it and other devices,
if the device is transferred to a room where the temperature is higher than where it
has previously been kept, water vapour may condensate inside its casing, which will
Wait until the condensed water evaporates.
R&TTE declaration of conformity
Distances and interferences
The transmission distance may vary, depending on the frequency, environment,
radio waves, buildings, weather conditions, etc.
1.
When the transmitter is near such equipment as the TV set, R-LAN wireless
network, another transmitter, or when it is placed between other radio devices,
then the video stream may be interrupted or the devices might even lose the
connection. If this occurs, increase the distance between the interrupted devi-
ces and the transmitter.
The signal reception may vary, depending on the transmitter's working height
and angle. If the signal reception is not stable, optimise the antenna settings.
Meteorological radars operating within the frequency ranges of 5,250-5,350
MHz and 5,650-5,850MHz have the highest priority. These radars can interrupt
the device operation or even prevent it entirely.
2.
3.
4.
Warning
The antennas used for the transmission from this transmitter must be installed
according to the instruction manual and they must be placed at least 30cm from all
persons. The transmitter is not compatible with another antenna nor transmitter.
*
*
*
*
*
*
*
*
*
*
5EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
1. Basic information
2. Description of the connectors and LED indicators.
II Contents
The CDS-5IPmini device is a small wireless module for video streaming from IP HD and 4K
(5.1-5.8Ghz) megapixel cameras.
The most important features of the CDS-5IPmini:
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
device is intended for streaming the signal from high-resolution IP cameras
(up to 10 Mpx),
CDS-5IP mini is both a transmitter and a receiver, integrated within one module
(transceiver),
it guarantees a continuous and reliable streaming capacity,
it works both in the point-to-point and point-to-multipoint topologies,
small dimensions of the device,
output power: 24dBm,
operating band: 5GHz,
transmission secured with a 64/128/152-bit code,
one receiver module can receive signals from four transmitters/cameras,
camera and module may be fed from one PoE 12-24V power supply,
LED radio signal level indicator,
built-in dual MIMO 5Ghz 2 x 13dBi antenna (LoS coverage < 2km),
outer casing IP55,
working temperature from -20 to 70,
iCAMSAT – a video communication protocol which guarantees reliable streaming of
nearly all frames in HD quality (available from March 2016).
CONNECTOR PANEL DESCRIPTION
LAN/PoE - a connector for connecting the network cable with the RJ45 connector,
enabling simultaneous data transmission and module power supply.
Reset -
Ground -
a button for resetting the module to its default settings; to reset
WKHPRGXOHSUHVVWKHEXWWRQDQGKROGLWIRUYHVHFRQGVXQWLOWKHʏ+Lʐ
ʏ0LGʐDQGʏ/2:ʐGLRGHVVWDUWWRLFNHUWKHQUHOHDVHWKHEXWWRQ
a screw terminal for connecting the module to its earthing – pole,
lightning conductor, lightning protection system, to name a few
ʇZLWKWKHFDEOHGHOLYHUHGWRJHWKHUZLWKWKHZKROHVHW
LAN/PoE Reset Ground
DESCRIPTION OF THE LED INDICATORS
PWR On – power supply/system is on
2ʇSRZHUVXSSO\V\VWHPLVR
LAN
WLAN
Signal strength
2ʇQR/$1FRQQHFWLRQ
2QʇFRQQHFWLRQHVWDEOLVKHG
)OLFNHUVʇGDWDUHFHSWLRQWUDQVPLVVLRQ
2ʇQRZLUHOHVVFRQQHFWLRQ
2QʇZLUHOHVVFRQQHFWLRQHVWDEOLVKHG
)OLFNHUVʇGDWDUHFHSWLRQWUDQVPLVVLRQ
9HU\JRRG/('ʇ+L0LG/2:
*RRG/('ʇ0LG/2:
3RRU/('ʇ/2:
G
Hi Mid LOW LAN WLAN PWR
SIGNAL INDICATORS
YR
1. Logging into the system
2. Factory settings
3. Menu structure
6EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
To log into the wireless CDS-5IPmini module, set the computer IP address in the same
subnet as the CDS-5IPmini device (default IP address: 192.168.1.1). Start your web
browser (we recommend the Internet Explorer) and type in the IP address of the
module. The login menu will be displayed on the screen:
STATUS
On the screen above, type in the login data (default name: admin, password: password)
and click the “Login” button to log into the module.
Information (basic information about the module settings)
Connections (list of active wireless connections, together with the connection quality)
Statistics (information about the amount of received/transmitted data)
FeatureDefault factory settings
User name admin
Password password
European Union
5500 MHz (CH100)
20 MHz
Device name CDS-5IP mini
Operation mode
Country/Region
Channel number
Band width
BRIDGE
192.168.1.1
Subnet mask 255.255.255.0
Gateway 0.0.0.0
IP address
Note: The device manufacturer is not responsible for the devices that are not properly
protected and for related damage of the equipment and other network infrastructure.
SYSTEM
Basic Settings (device name and region settings)
Network Settings (settings of the wireless system operation mode and IP address)
Time Settings (time settings, NTP server settings)
WIRELESS
Basic Settings (basic configuration of the wireless connection: operating mode, chan-
nel, output power)
Security Settings (safety settings, transmission coding)
Advanced Settings (advanced settings of the wireless connection)
WDS Settings (WDS settings related to the recommended operation mode: Bridge)
MANAGEMENT
Password Settings (access data settings)
Firmware Upgrade (firmware update – for advanced users)
Configuration File (saving and loading of the module configuration and resetting the
module to its factory settings)
TOOLS
System Log (history of changes/logging on the CDS-5IPmini module)
4. Module assembly on the pole:
Reverse the CDS-5IPmini unit. Insert the mounting clamps intended for the module
assembly on the pole into appropriate openings in the rear part of the device body.
Remember to loosen the mounting clamps with a screwdriver before pushing them
through the openings in the device body.
Stably fix the CDS-5IPmini module to the pole, firmly tightening the bolts of the moun-
ting clamps. The clamps are suitable for the assembly on poles with diameters between
32 and 70mm.
While installing units on outdoor poles, make sure to use overvoltage protection
for Ethernet cables. The pole must be earthed unconditionally. Failure to observe
these guidelines may result in damaging the equipment during lightning strikes.
This type of damage is not covered by the warranty.
7EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
Note! Any remote changes in the radio link settings after mounting the units on
the poles should begin at the transmitter side. Otherwise, changing the operation
channel in the receiver unit, for instance, may result in breaking the connection
with the transmitter units and, therefore, it might render their remote re-configu-
ration impossible.
Insert the plug of the standard cable with the RJ45 termination into the LAN
connector in the CDS-5IPmini module. Connect the other termination to
the connector marked as “Data & Power Out” in the PoE unit delivered together with
whole set. Connect the computer / IP camera / recorder with the network cable to
the second connector in the power supply unit, marked as “Data In”.
Plug the power cord with the RJ45tip to LAN connector in CDS-5IPmini module and the
other end into the "POE" connector splitter. Connect computer / IP camera / recorder
to "LAN" connector in the manifold by network cable.
Then, connect the cable from the power supply to the camera and splitter.
To configure any CDS-5IPmini module, follow the proper sequence, beginning at the
receiver point. Configure the module in the workshop environment, without prior hang-
ing it on the structure. Before setting the radio system, configure the IP camera. Install
it on the computer and check whether the video is being received correctly.
a) Check the addresses of the IP cameras and the address of the CDS-5IPmini
module. Set the computer IP address so that all the devices work within one
subnet (recommended IP addresses: 192.168.1.0-192.168.1.254). It is not
acceptable to set two identical addresses within one local network.
8EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
5. Connection to the system.
Option 2
Option 1
6. First system start-up
!
LAN/PoE
Power Socket
Reset Ground
Data In Data &
Power Out
mini
LAN/PoE
POE
12V DC
LAN
Reset Ground
mini
Connect the CDS-5IPmini device to the computer according to the instructions in
pt. 5.
b)
Start your Internet browser, for instance the Internet Explorer. Type the IP
address of the CDS-5IPmini device in the address bar (default: 192.168.1.1). The
following logging menu should be displayed on the screen:
If the browser returns the error, go back to point 1 and make sure that the IP
address is correct.
c)
To log into the network user interface, type in the user name and password (default
user: admin, default password: password) and click the “login” button.
The CDS-5IPmini module management interface will be displayed.
d)
Start the configuration from the LAN parameters. In the System menu, select the Net-
work Settings tab. The following screen will be displayed:
e)
9EUEU
POLISH
MARK
POLISH
MARK
CDS-5IPMINI User Guide
If there is already a device with the IP address: 192.168.1.1 in the local network,
disconnect it to configure the CDS-5IPmini. You can also temporarily disconnect
the computer from the local network.
!
Autres manuels pour CDS-5IPmini
1
Table des matières
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
