Campo Equipment Blaze EB400G Manuel utilisateur

EB400G Field Assist Troubleshooting Guide

Burner control is locked-out on reset Burner control is NOT locked-out on reset

Page 15

Page 2

Welcome to the Campo “Field Assist Troubleshooting Guides”.

These guides were developed to assist the working technicians in the field. We’ve supplied issues

and solutions to the most common problems encountered in the field. If you need assistance while

troubleshooting on the job, they are easy to store in your smart phone, tablet or computer.

Getting Started is easy! Just click on ‘Page #’

for the problem you are encountering

➢Contact Us…Page 30

➢Tech Tips and Bulletins for you…Page 31 +

➢Quick set-up and Installation Guides and Tools of the Trade for you…Page 33 +

HOME

•Before resetting the burner control, ensure you have between 7-14” WC

pressure supplied to the gas valve.

•Ensure the ‘switchover valve’ is in the proper position for LP OR NG

Burner is locked out on reset

•You reset the control and it goes through the 60 second purge, but doesn’t

ignite…… Page 3

•You Reset the Burner Control. The Burner motor Does Not Start and the

Burner Control Locks-out on Reset…Page 10

•You Reset the Burner Control, but the reset light is solid red during the pre-

purge, and the control locks out on reset… Page 13

•You Reset the Burner Control and after the pre-purge, the burner fires up,

but the flame goes out after 5 to 10 seconds... PAGE 14

HOME

You reset the control and it goes through the 60 second

purge, but doesn’t ignite…

Outlet port

•Install your manometer in the outlet port of the gas valve.

•Reset the burner control.

•After the 60 second purge, check to see if gas pressure is

coming through the valve.

•Keep a close eye on the manometer, as the pressure will only

NOTE: If gas pressure is present… Page 4

If gas pressure is NOT present… Page 6

HOME

If gas pressure is present…

➢Test the components... Page 5

✓Defective igniter

✓Defective ignition cable

✓Broken electrode

3.5

HOME

Testing the Igniter

1. Inspect the ignition electrode for cracks.

2. Inspect the ignition cable for cracks.

3. Inspect the electrode gap, ensuring the gap is 1/8”.

•With the gun still outside the burner casing, re-connect the

ignition cable to the igniter.

•Ensure the gas gun is WELL GROUNDED to the burner

housing when testing for spark.

•Reset the burner control and check for spark after the pre-

purge.

•Keep a close eye on the electrode as the spark will only

appear for 1 second AFTER the 60 second pre-purge.

Ignition Cable Electrode (Gap 1/8”)

✓No spark indicates a defective igniter

SHUT OFF the gas supply to the burner before testing!

HOME

If gas pressure is NOT present…

✓ON/OFF switch is in the OFF position

✓Defective 24v Transformer

✓Defective Burner Control

✓Defective gas valve

➢Test the components…Page 7

HOME

Checking the ON/OFF switch

➢Continue to… Page 8

•Ensure the ‘switchover valve’

is in the proper position for LP

OR NG

•Ensure the gas valve switch is

in the ON position.

HOME

Checking the 24 volt transformer

Check black and red stripe wires on 6 prong plug

For 24 volts

✓If 24 volts is NOT present, the transformer is

defective.

•If 24 volts is present… Page 9

HOME

Checking the burner control and gas valve

Reset the Burner Control. After the 60 second purge,

check for 24 volts on the white and violet wires on the 6

prong plug.

✓If 24 volts is present, after the 60 second purge, the gas

valve is defective.

✓If 24 volts is NOT present after the 60 second purge,

the burner control is defective.

HOME

You reset the burner control. The burner motor does not

start and the burner control locks out on reset.

✔Defective burner motor.

✔Defective Burner Control

✔Defective Motor Relay

➢Test the components…Page 11

Light Flashing reset control

HOME

Autres manuels Campo Equipment Chauffage

Campo Equipment

Campo Equipment ECOBlaze 200D Turbo Manuel utilisateur

Campo Equipment

Campo Equipment BLAZE 9E Manuel utilisateur

Campo Equipment

Campo Equipment BLAZE 150E Manuel utilisateur

Campo Equipment

Campo Equipment ECOBlaze DF2500 Manuel utilisateur

Campo Equipment

Campo Equipment BLAZE 1.5E Manuel utilisateur

Campo Equipment

Campo Equipment ECOBlaze DF1600 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur