Campbell CCFC Manuel utilisateur

INSTRUCTION MANUAL

CCFC Field Camera

May 2016

Campbell Scientific (Canada) Corp.

WARRANTY AND ASSISTANCE

This equipment is warranted by CAMPBELL SCIENTIFIC (CANADA) CORP. ("CSC") to

be free from defects in materials and workmanship under normal use and service for

twenty-four (24) months from date of shipment unless specified otherwise. *****

Batteries

are not warranted. ***** CSC's obligation under this warranty is limited to

repairing or replacing (at CSC's option) defective products. The customer shall assume

all costs of

removing, reinstalling, and shipping defective products to CSC. CSC will

return such products by surface carrier prepaid. This warranty shall not apply to any

CSC products which have been subjected to modification, misuse, neglect, accidents of

nature, or shipping damage. This warranty is in lieu of all other warranties, expressed or

implied, including warranties of merchantability or fitness for a particular purpose. CSC

is not

liable for special, indirect, incidental, or consequential damages.

Products may not be returned without prior authorization. To obtain a Return

Merchandise Authorization (RMA), contact CAMPBELL SCIENTIFIC (CANADA) CORP.,

at (780) 454-2505. An RMA number will be issued in order to facilitate Repair Personnel

in identifying an instrument upon arrival. Please write this number clearly on the outside

of the shipping container. Include description of symptoms and all pertinent details.

CAMPBELL SCIENTIFIC (CANADA) CORP. does not accept collect calls.

Non-warranty products returned for repair should be accompanied by a purchase order to

cover repair costs.

Precautions

DANGER —MANY HAZARDS ARE ASSOCIATED WITH INSTALLING, USING, MAINTAINING, AND WORKING ON OR AROUND

TRIPODS, TOWERS, AND ANY ATTACHMENTS TO TRIPODS AND TOWERS SUCH AS SENSORS, CROSSARMS, ENCLOSURES,

ANTENNAS, ETC. FAILURE TO PROPERLY AND COMPLETELY ASSEMBLE, INSTALL, OPERATE, USE, AND MAINTAIN TRIPODS,

TOWERS, AND ATTACHMENTS, AND FAILURE TO HEED WARNINGS, INCREASES THE RISK OF DEATH, ACCIDENT, SERIOUS

INJURY, PROPERTY DAMAGE, AND PRODUCT FAILURE. TAKE ALL REASONABLE PRECAUTIONS TO AVOID THESE HAZARDS.

CHECK WITH YOUR ORGANIZATION'S SAFETY COORDINATOR (OR POLICY) FOR PROCEDURES AND REQUIRED PROTECTIVE

EQUIPMENT PRIOR TO PERFORMING ANY WORK.

Use tripods, towers, and attachments to tripods and towers only for purposes for which they are designed. Do not exceed design

limits. Be familiar and comply with all instructions provided in product manuals. Manuals are available at www.campbellsci.ca or by

telephoning (780) 454-2505 (Canada). You are responsible for conformance with governing codes and regulations, including safety

regulations, and the integrity and location of structures or land to which towers, tripods, and any attachments are attached. Installation

sites should be evaluated and approved by a qualified personnel (e.g. engineer). If questions or concerns arise regarding installation,

use, or maintenance of tripods, towers, attachments, or electrical connections, consult with a licensed and qualified engineer or

electrician.

General

Prior to performing site or installation work, obtain required approvals and permits.

Use only qualified personnel for installation, use, and maintenance of tripods and towers, and

any attachments to tripods and towers. The use of licensed and qualified contractors is

highly recommended.

Read all applicable instructions carefully and understand procedures thoroughly before

beginning work.

Wear a hardhat and eye protection, and take other appropriate safety precautions while

working on or around tripods and towers.

Do not climb tripods or towers at any time, and prohibit climbing by other persons. Take

reasonable precautions to secure tripod and tower sites from trespassers.

Use only manufacturer recommended parts, materials, and tools.

Utility and Electrical

You can be killed or sustain serious bodily injury if the tripod, tower, or attachments you are

installing, constructing, using, or maintaining, or a tool, stake, or anchor, come in contact

with overhead or underground utility lines.

Maintain a distance of at least one-and-one-half times structure height, 6 meters (20 feet), or

the distance required by applicable law, whichever is greater, between overhead utility lines

and the structure (tripod, tower, attachments, or tools).

Prior to performing site or installation work, inform all utility companies and have all

underground utilities marked.

Comply with all electrical codes. Electrical equipment and related grounding devices should

be installed by a licensed and qualified electrician.

Elevated Work and Weather

Exercise extreme caution when performing elevated work.

Use appropriate equipment and safety practices.

During installation and maintenance, keep tower and tripod sites clear of un-trained or non-

essential personnel. Take precautions to prevent elevated tools and objects from dropping.

Do not perform any work in inclement weather, including wind, rain, snow, lightning, etc.

Maintenance

Periodically (at least yearly) check for wear and damage, including corrosion, stress cracks,

frayed cables, loose cable clamps, cable tightness, etc. and take necessary corrective actions.

Periodically (at least yearly) check electrical ground connections.

WHILE EVERY ATTEMPT IS MADE TO EMBODY THE HIGHEST DEGREE OF SAFETY IN ALL CAMPBELL SCIENTIFIC PRODUCTS,

THE CLIENT ASSUMES ALL RISK FROM ANY INJURY RESULTING FROM IMPROPER INSTALLATION, USE, OR MAINTENANCE OF

TRIPODS, TOWERS, OR ATTACHMENTS TO TRIPODS AND TOWERS SUCH AS SENSORS, CROSSARMS, ENCLOSURES, ANTENNAS,

ETC.

IR Warning

Infrared (IR) is emitted from the CCFC. Do not look directly at the IR

LED when the CCFC is connected to power.

The CCFC utilizes 2 high intensity nonvisible IR (850nm) LEDs for

night vision illumination.

Do not make physical contact with the IR LEDs or place any body part

near the IR LEDs (less than 5cm) while the camera is powered on.

When in close proximity with the illuminated IR LEDs, there is a

potential skin burn hazard.

See Section 5 Cautionary Statements for more information.

IR LEDs

Table of Contents

PDF viewers: These page numbers refer to the printed version of this document. Use the

PDF reader bookmarks tab for links to specific sections.

1. Introduction................................................................1

2. Specifications.............................................................2

3. Initial Inspection.........................................................4

4. Quick Notes................................................................5

4.1 CCFC General ...................................................................5

4.2 Campbell Dataloggers Users.............................................6

4.3 Configuration Process........................................................6

5. Cautionary Statements..............................................8

6. Factory Setup.............................................................9

7. Camera Hardware.....................................................10

7.1 Power I/O Connection .....................................................11

7.2 Setup Button/Status LED.................................................11

7.2.1 Status LED.................................................................12

7.2.2 Setup Button ..............................................................13

7.3 Camera Memory..............................................................13

7.3.1 Link to Most Recent Photo and Video ......................14

7.3.2 FTP Photo Collection from Camera Memory ...........14

7.4 Modem Power Control ....................................................15

7.5 Lens .................................................................................16

7.5.1 Camera Lens and Field of View................................16

7.5.2 Camera Auto Focus ...................................................16

7.5.3 Temperature Variations and Focus............................16

7.5.4 Lens IR Cut Filter......................................................17

8. Cables/Wiring...........................................................17

8.1 Power & I/O Cable Connections.....................................17

8.2 Power & I/O Cable Details..............................................19

8.3 Ethernet Cables................................................................20

9. Using Device Configuration Utility .........................21

10. Photo Quality............................................................23

Table of Contents

11. Connecting to the Web Interface ............................23

11.1 Setup Using Wi-Fi...........................................................23

11.2 Setup Using Ethernet.......................................................24

11.2.1Link Local IP Address Auto-Configuration..............24

12. Camera Operation using the Web Interface...........24

12.1 Installing MultiMedia Player...........................................24

12.1.1RTSP Video Stream...................................................25

12.1.1.1Sources..............................................................25

12.1.1.2Embedding........................................................26

12.1.2UPnP Discovery ........................................................26

12.2 Web Interface Overview..................................................26

12.2.1Live Video Modal......................................................30

12.2.2Power Icon.................................................................31

12.2.3Set Up Progress Bar...................................................31

12.3 Dashboard........................................................................31

12.4 Capture Modes.................................................................33

12.4.1Timed Capture...........................................................34

12.4.2External Trigger.........................................................39

12.4.3Motion Detect............................................................44

12.5 Lens Position ...................................................................50

12.6 Media Settings.................................................................52

12.6.1Photo Capture............................................................53

12.6.2Video Capture............................................................57

12.7 File Explorer....................................................................59

12.8 Settings ............................................................................61

12.8.1General.......................................................................61

12.8.1.1SNTP.................................................................63

12.8.2Network.....................................................................64

12.8.2.1Wired Ethernet Settings....................................65

12.8.2.2Wi-Fi Settings...................................................67

12.8.2.3Wi-Fi Access Mode..........................................68

12.8.2.3.1Wi-Fi Access Point..................................68

12.8.2.3.2Existing Network.....................................70

12.8.3File Transfer ..............................................................71

12.8.3.1FTP ...................................................................72

12.8.3.2Email.................................................................74

12.8.3.3PakBus..............................................................76

12.8.4Camera Operation......................................................78

12.8.4.1Camera Power Modes.......................................78

12.8.4.2Ethernet Power Mode.......................................81

12.8.4.3Wi-Fi Power Mode...........................................82

12.8.4.4Night Mode.......................................................83

12.8.4.4.1IR LED Power Control............................84

12.8.4.4.2Filter Control ...........................................85

12.8.4.4.3Light Power Control................................85

12.8.4.5Digital I/O.........................................................86

12.8.4.5.1Modem Power Control ............................86

12.8.4.5.2Lens Defroster Control............................87

12.8.5Advanced...................................................................88

12.8.5.1GPS...................................................................88

12.8.5.2Import/Export ...................................................89

12.8.5.3Update...............................................................91

12.8.5.4Users.................................................................92

12.8.5.5History ..............................................................94

13. RS-232 Communications.........................................94

14. RS-485 Communications.........................................96

15. Send Via PakBus: PakBus Communications.........97

15.1 Send Via PakBus: Concurrent PakBus Communications98

15.2 Send Via PakBus: PakBus Graph Operations .................98

15.2.1Dataogger Settings.....................................................98

15.2.2Discovery...................................................................98

15.3 Setting Up Datalogger to Work with CCFC: PakBus

Variable Control ...........................................................99

15.3.1PakBus Control of Window Defroster Function .....100

15.3.2PakBus Control of CCFC Power.............................100

15.3.3Example Program –SendVariable Instruction –CR1000

..............................................................................101

15.3.4Example Program –Adding GPS Coordinates to the

Photo Banner –CR1000.......................................102

15.4 PakBus Neighbouring Address......................................103

16. Power Calculations and Timings ..........................103

16.1 Standalone Operation ....................................................103

16.2 Operation with Communications...................................105

17. CCFC Compatability ..............................................107

18. CR1000 Interface Guide.........................................108

18.1 CR1000 Memory Setup.................................................108

18.2 CR1000 Files Manager..................................................108

18.3 CR1000 COM Port (Control Port) Communications....109

19. Remote Photo Retrieval.........................................110

19.1 LoggerNet File Retrieval...............................................110

19.2 Using LoggerNet File Control.......................................112

Table of Contents

20. Mounting.................................................................113

21. Maintenance ...........................................................115

21.1 Lithium Battery..............................................................115

21.2 Window and Lens Cleaning ..........................................116

22. System Limitations ................................................116

22.1 High Resolution 5 Megapixel Photos............................116

22.2 Simultaneous Processes.................................................116

Appendix A. CCFC Camera Accessories.............A-117

A.1 CCFCCBL1-L Power & I/O Cable ...........................A-117

A.2 CCFCCBL2-L Environmental Ethernet Cable..............A-2

A.3 L18549 Mounting Kit....................................................A-2

A.4 L28840 DB9 FEMALE To Terminal Block Adaptor ...A-3

Figures

Figure 1-1 CCFC Camera............................................................1

Figure 7-1 CCFC Connector Layout.........................................11

Figure 7-2 Photo Collection from Installed Camera Memory...15

Figure 9-1 CCFC shown in Device Configuration Utility ........22

Figure 12-1 Dashboard - Desktop view....................................27

Figure 12-2 Dashboard - Mobile views....................................27

Figure 12-3 Top Navigation Bar –Desktop view .....................30

Figure 12-4 Live Video Modal...................................................30

Figure 12-5 Set Up Progress bar ...............................................31

Figure 12-6 CCFC Dashboard..................................................32

Figure 12-7 Manual Capture Modal..........................................33

Figure 12-8 Timed Capture.......................................................34

Figure 12-9 Timed Capture: Create New Profile......................35

Figure 12-10 External Trigger ..................................................40

Figure 12-11 External Trigger: Create New Profile.................41

Figure 12-12 Motion Detect ......................................................44

Figure 12-13 Motion Detect: Create New Profile.....................46

Figure 12-14 Lens Position .......................................................50

Figure 12-15 Lens Position Modal............................................51

Figure 12-16 Lens Position Modal (in Capture Modes)............51

Figure 12-17 Media Settings .....................................................53

Figure 12-18 Media Settings: Edit Photo Profile ......................53

Figure 12-19 Photo Settings Modal...........................................54

Figure 12-20 Media Settings: Edit Video Profile......................58

Figure 12-21 Video Settings Modal...........................................58

Figure 12-22 File Explorer: Camera Memory Details..............60

Figure 12-23 File Explorer: File Details...................................60

Figure 12-24 General Settings...................................................62

Figure 12-25 Date and Time Settings: Sync with SNTP Server64

Figure 12-26 Network................................................................65

Figure 12-27 Network Pop-up on Google Chrome...................65

Figure 12-28 Wired Ethernet Settings.......................................66

Figure 12-29 Wi-Fi Settings ......................................................67

Figure 12-30 Access Point Settings...........................................68

Figure 12-31 Connect to Existing Network...............................70

Figure 12-32 FTP Settings ........................................................72

Figure 12-33 FTP Settings Modal.............................................72

Figure 12-34 Email Settings......................................................74

Figure 12-35 Email Settings Modal...........................................74

Figure 12-36 PakBus Settings ...................................................76

Figure 12-37 PakBus Modal......................................................76

Figure 12-38 Camera Power Modes .........................................78

Figure 12-39 Ethernet Power Modes ........................................81

Figure 12-40 Wi-Fi Power Mode ..............................................82

Figure 12-41 Night Mode ..........................................................84

Figure 12-42 Digital I/O Settings..............................................86

Figure 12-43 Modem Power Control ........................................87

Figure 12-44 Lens Defroster Control: Always On....................87

Figure 12-45 Lens Defroster Control: Prior to Capture...........88

Figure 12-46 GPS......................................................................88

Figure 12-47 GPS: Degrees, Minutes, Seconds ........................89

Figure 12-48 GPS: Decimal Degrees........................................89

Figure 12-49 Import/Export Camera Settings...........................90

Figure 12-50: Update ................................................................91

Figure 12-51 Users and Security Settings.................................93

Figure 12-52 History .................................................................94

Figure 13-1 PakBus Settings .....................................................95

Figure 13-2 L28840 DB9 FEMALE to Terminal Block Adapter95

Figure 19-1 File Retrieval Setup Screen .................................111

Figure 19-2 Loggernet Connection Screen..............................112

Figure 19-3 USR Drive View in File Control.........................113

Figure 20-1 CCFC Mounting Kit............................................114

Figure 20-2 CCFC Mounting Holes........................................114

Figure 20-3 CCFC Mounted to Crossarm...............................115

Tables

Table 4-1 Power Mode Summary................................................7

Table 6-1 CCFC Factory Default Configuration.......................10

Table 7-1 Setup Button Status LED..........................................12

Table 8-1 Power & I/O Cable Connections...............................18

Table 9-1 RS-232 Wiring Diagram...........................................21

Autres manuels pour CCFC

Table des matières

Autres manuels Campbell Caméra IP

Campbell

Campbell CC5MPX 6HULHV Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur