Camos CN-800 Manuel utilisateur
CN-800
Mobile Navigation System
USERS MANUAL
http://www.camos-multimedia.com
IMC GmbH Nikolaus-Otto-Str.16 22946 Trittau, Germany
Tel. +49(0)4154 / 7093202-0 Fax +49(0)4154 / 7093202-20
2
CN-800Table of contents
Table of contents
Safety information
Package contents
Installation
Basic operations
Connectors and control buttons
Main Screen
Time, speed and direction
Split screen and quick overlay
Bluetooth phone control
AV/RV/IR input
Music player
Picture viewer
Movie player
Utilities
Settings
Startup
FM Transmitter
Rearview Camera
Language
Touch screen
Date / Time
Power
Quick menu
Mini USB
Version information & Upgrade
Default
Trouble shooting
Product specifications
Produced by CAMOS Europe GmbH
Copyright © 2010 CAMOS Europe GmbH
Design and specifications are subject to change without notice. All product and
brand names are trademarks or registered trademarks of their respective holders. All
rights reserved. Restricted copies, even just parts of them, duplication or dissemina-
tion by means of electronic media is only permitted through written authorization of
Camos Europe GmbH.
.......................................................3
......................................................4
....................................................................5
..........................................................6
...............................7
...............................................................10
.......................................11
................................12
..........................................13
...........................................................19
...............................................................20
............................................................22
..............................................................24
.........................................................................26
.......................................................................28
.............................................................28
.................................................29
..........................................29
........................................................30
...................................................30
......................................................31
...............................................................31
.....................................................32
............................................................32
....................33
.............................................................33
........................................................34
..............................................35
3
CN-800 Safety informations
Safety information
Please read the safety information carefully before using this product. Follow-
ing of the safety informations prevents users from any damage related with
the misuse of this product.
Do not try to open the product. It can cause an electric
shock!
Do not put pins or needles into the product or electric
cord of product.
In case of damage, please switch-off the product and
contact your dealer or the CAMOS customer service.
This product is only made for 12-24V DC use. Please be
careful while connecting.
Check for correct polarity.
Please install the product while it is switched off.
Prevent the product from infiltration of any liquids or en-
trapping moisture.
Only clean with dry cloth.
Do not clean with alcoholic or oily solvent.
Do not operate this unit while driving.
•
•
•
•
•
•
•
•
•
•
4
CN-800Package contens
Package contents
CN-800 Stand / suction base
Cigarette lighter cable TMC Module (optional)
AV cable (optional) RV cable (optional)
5
CN-800 Installation
Installation
Take care while mounting the CN-800 in your vehicle, whether using the wind-
shield mount or other mount, that it does not obstruct the driver’s view of the
road. Make sure that the placement of the CN-800 and cable does not inter-
fere with the operation of vehicle safety devices, such as air bags. You assume
the risks associated with damage to your vehicle or vehicle’s occupants as a
result of how you choose to mount the CN-800.
Clean the surface of the location you
wish to place the mount bracket.
Do not mount where the driver’s view
will be obstructed.
Slide the main system onto the mount
clip and adjust the angle properly.
Please, check the mount and
main system in proper position.
Insert DC plug of Cigarette lighter cable
into the fused +12V socket of main sys-
tem and connect the other end to the
+12V cigarette lighter socket.
6
CN-800Basic operations
Basic operations
Switching battery state
Switch ON the battery ON/OFF switch on the rear side of the unit. After start-
ing engine, your device will start up automatically or push the power button
to start the device.
Power ON/OFF
To turn ON the CN-800 push the power button on the top side. The first time
you turn on your CN-800, it may take up to 5 seconds to start. To power OFF
the device, push the power button 2 seconds.
If you stop your car engine, CN-800 will detect that there is no power con-
nection and you will get a message for keep using or turning off the device.
If you don‘t choose any option, the device will shutdown automatically after
30 seconds to protect the battery from running out.
Locating your current position
Your CN-800 must be outside to locate your current position. The first time you
start the device, it can take up to 3 minutes to find your current position. If it
takes longer than 3 minutes, make sure that you are in an open place with-
out tall buildings or trees around you.
In the future, your position will be found much faster, normally within a few
seconds.
Once CN-800 has located your current position, the driving view is shown in
full colour and shows your position on the map.
NOTE:
Some vehicles have a heat reflective shield embedded in the windshield that
may prevent the device from locating your current position. If this is a prob-
lem in your vehicle, use an external GPS antenna.
7
CN-800 Connectors and control buttons
Connectors and control buttons
Front and top components
1 Power button Press short to switch LCD on/off.
Hold (2 sec.) for suspend with connected
power, or power on/off in battery mode
2 Mode button Back to main menu or open quick overlay
menu
3/4 Volume up/down Increase / decrease volume level
5 GPS antenna Receives GPS signal from satellites
6 Sensor window For optional remote control
7 MIC hole Build in microphone
8 Touch screen Tap the screen with your fingertip to select
menu commands
8
CN-800Connectors and control buttons
Connectors and control buttons
Rear, right and left side components
1 MIC input To connect external microphone
2 RS-232 port To connect via RS-232
3 Line-Out Audio output
4 Rear-Cam To connect rear-view camera
5 AV-In To connect external video device
6 DC Input 12~24V DC Input
7 Mini USB Connect USB cable for charging or active-
sync, connect optional TMC module
8 SD-Slot Slot for SD-Card with navigation software,
music, videos, etc.
9 USB-Host To connect USB-Host devices like USB me-
mory or HDD etc.
10 IR Connect external DVD player
9
CN-800 Connectors and control buttons
Connectors and control buttons
11 Mounting holes To connect stand or suction base
12 External GPS
antenna port
This connector(under dust cover) allows
use of an optional external GPS antenna
with magnetic mount, which may be
positioned on top of the car for better
GPS signal reception in areas with poor
reception
13 Ext. 24 pin
connector Connector for an external control box
(optional)
14 Speaker Stereo speaker for audio output
15 Battery ON/OFF Turns the battery on and off
16 Reset button Restarts the device (soft reset)
17 Stylus pen A tool for touching the LCD panel
Plugs
10
CN-800Main Screen
Main Screen
CN-800 has two different main screens.
The default main screen like shown below.
And another main screen where you can set an image or photo from the
photo application as wallpaper.
Change main screen mode
Adjust display brightness
(up to level 5, fixed to 3 in battery mode)
LCD on/off
Volume control
Status bar
Table des matières
Autres manuels Camos GPS
