Cameo S2 IP Manuel utilisateur

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

S2 IP

LED SOFTLIGHT PANEL - IP65

CLS2IP

RGBW

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

NOTES ON PORTABLE OUTDOOR DEVICES 10

INCLUDED 10

INTRODUCTION 11

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 12

OPERATION 14

MOUNTING THE TV SPIGOT ON THE U-BRACKET 28

STATIV MOUNTING 28

USING TV SPIGOTS FOR TRUSS MOUNTING 29

OMEGA BRACKET 30

DIFFUSER PANEL 31

OPTIONAL ACCESSORIES 33

CARE, MAINTENANCE AND REPAIR 33

DIMENSIONS 35

TECHNICAL DATA 36

EXPLANATION OF IP PROTECTION CLASS 37

MINIMUM DISTANCE TO ILLUMINATED SURFACE 37

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 38

DISPOSAL 38

MANUFACTURER’S DECLARATIONS 38

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 41

BESTIMMUNGSGEMÄSSER GEBRAUCH 41

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 41

SICHERHEITSHINWEISE 42

HINWEISE FÜR ORTSVERÄNDERLICHE OUTDOOR-GERÄTE 45

LIEFERUMFANG 46

EINFÜHRUNG 46

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 47

BEDIENUNG 50

TV-ZAPFEN AM U-BÜGEL MONTIEREN 64

STATIVMONTAGE 64

TV-ZAPFEN FÜR TRAVERSENMONTAGE NUTZEN 65

OMEGA-BÜGEL 66

DIFFUSORSCHEIBE 67

OPTIONALES ZUBEHÖR 69

PFLEGE, WARTUNG UND REPARATUR 69

ABMESSUNGEN 71

TECHNISCHE DATEN 72

ERLÄUTERUNGEN ZUR IP-SCHUTZART 73

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 73

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 74

ENTSORGUNG 74

HERSTELLERERKLÄRUNGEN 74

FRANÇAIS

INFORMATIONS SUR CE MANUEL D'UTILISATION 76

UTILISATION PRÉVUE 76

DÉFINITIONS ET EXPLICATION DES PICTOGRAMMES 76

CONSIGNES DE SÉCURITÉ 77

NOTES SUR LES APPAREILS PORTABLES POUR EXTÉRIEUR 81

CONTENU DU CARTON 81

INTRODUCTION 81

BRANCHEMENTS, UTILISATION ET INDICATEURS 82

OPERATION 85

MONTAGE DE L'EMBOUT TV SUR LE SUPPORT EN U 100

MONTAGE STATIF 100

L'UTILISATION D'EMBOUTS TV POUR LE MONTAGE D'UNE ARMATURE 101

SUPPORT OMEGA 102

PANNEAU DIFFUSEUR 103

ACCESSOIRES EN OPTION 105

ENTRETIEN, MAINTENANCE ET RÉPARATIONS 105

DIMENSIONS 107

CARACÉRISTIQUES TECHNIQUES 108

EXPLICATION DE LA CLASSE DE PROTECTION IP 109

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 110

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 110

MISE AU REBUT 110

DÉCLARATIONS DU FABRICANT 111

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DEL USUARIO 112

USO PREVISTO 112

DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 112

INSTRUCCIONES DE SEGURIDAD 113

NOTAS SOBRE LOS DISPOSITIVOS PORTÁTILES DE EXTERIOR 117

CONTENIDO DE LA ENTREGA 117

INTRODUCCIÓN 117

CONEXIONES, MANDOS E INDICADORES 118

OPERATION 121

MONTAJE DE LA ESPIGA DE TV EN EL SOPORTE EN U 136

MONTAJE ESTATIVO 136

USO DE ESPIGAS DE TV PARA MONTAJE EN TRUSS 137

SOPORTE OMEGA 138

PANEL DIFUSOR 139

ACCESORIOS OPCIONALES 141

CUIDADO, MANTENIMIENTO Y REPARACIÓN 141

DIMENSIONES 143

DATOS TÉCNICOS 144

EXPLICACIÓN DE LA CLASE DE PROTECCIÓN IP 145

DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 146

DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 146

RECICLAJE 146

DECLARACIÓN DEL FABRICANTE 146

POLSKI

INFORMACJE NA TEMAT NINIEJSZEJ INSTRUKCJI OBSŁUGI 148

ZAMIERZONE ZASTOSOWANIE 148

DEFINICJE I OBJAŚNIENIA SYMBOLI 148

INSTRUKCJE BEZPIECZEŃSTWA 149

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 155

OPERATION 158

MONTAŻ KRÓĆCA TV NA UCHWYCIE U-KSZTAŁTNYM 172

MONTAŻ STATYCZNY 172

WYKORZYSTANIE CZOPÓW TV DO MONTAŻU KRATOWNICY 173

UCHWYT OMEGA 174

PANEL DYFUZYJNY 175

AKCESORIA OPCJONALNE 177

PIELĘGNACJA, KONSERWACJA I NAPRAWA 177

WYMIARY 179

DANE TECHNICZNE 180

WYJAŚNIENIE KLASY OCHRONY IP 181

MINIMALNA ODLEGŁOŚĆ OD OŚWIETLANEJ POWIERZCHNI 182

MINIMALNA ODLEGŁOŚĆ OD MATERIAŁÓW NORMALNIE ŁATWOPALNYCH 182

UTYLIZACJA 182

DEKLARACJE PRODUCENTA 182

ITALIANO

INFORMAZIONI SU QUESTO MANUALE DI ISTRUZIONI 184

USO PREVISTO 184

DEFINIZIONI E SPIEGAZIONI DEI SIMBOLI 184

ISTRUZIONI DI SICUREZZA 185

NOTE SUI DISPOSITIVI PORTATILI PER ESTERNI 188

MATERIALE COMPRESO NELLA FORNITURA 189

INTRODUZIONE 189

CONNESSIONI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 190

OPERATION 193

MONTAGGIO DEL RACCORDO TV SULLA STAFFA A U 207

MONTAGGIO STATIVO 207

UTILIZZANDO I RACCORDI TV PER IL MONTAGGIO DELLA CAPRIATA 208

BRACCIALE OMEGA 209

PANNELLO DIFFUSORE 210

ACCESSORI OPZIONALI 212

CURA, MANUTENZIONE E RIPARAZIONE 212

DIMENSIONI 214

DATI TECNICI 215

SPIEGAZIONE DELLA CLASSE DI PROTEZIONE IP 216

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 217

DISTANZA MINIMA DA MATERIALI NORMALMENTE INFLAMMABILI 217

SMALTIMENTO 217

DICHIARAZIONI DEL PRODUTTORE 217

DMX

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX /

CONTROL DMX / STEROWANIE DMX / CONTROLLO DMX 220

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

You have made the right choice!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is availab-

le on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is

an integral part of the product.

INTENDED USE

The product is a device for event technology!

This product has been developed for professional use in the field of event technology and is not

suitable for use as domestic lighting!

Furthermore, this product is only intended for qualified users with specialist knowledge of event

technology!

Use of the product outside the specified technical data and operating conditions is considered

improper use!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially

dangerous situations or conditions for life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-

tions or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations

or states that can lead to damage to property and/or the environment.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open or modify the unit.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and disconnect it

from the mains. The device may be repaired only by authorised repair technicians.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the unit fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the mains cable of the device is damaged, do not operate the device.

4. Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

1. Do not operate the unit if it has been exposed to large temperature ﬂuctuations

(for example, after transport). Moisture and condensation can damage the device.

Switch on the device only when it has reached room temperature.

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

2. Make sure that the voltage and frequency of the mains supply correspond to the

values indicated on the unit. If the device has a voltage selector switch, do not

connect the device until it has been set correctly. Use only suitable power cables.

3. To disconnect the unit from the mains at all poles, it is not sufficient to press the

on/off switch on the unit.

4. Make sure that the fuse used corresponds to the type printed on the unit.

5. Make sure that appropriate measures have been taken against overvoltage (e.g.

lightning strike).

6. Observe the specified maximum output current on units with Power Out connec-

tion. Ensure that the total current consumption of all connected devices does not

exceed the specified value.

7. Replace pluggable mains cables only with original cables.

HAZARD:

1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of

persons (including children) with reduced physical, sensory or mental capabilities.

2. Danger from falling down! Make sure that the device is securely installed and will

not fall down. Only use suitable stands or mounts (particularly for fixed installa-

tions). Ensure that accessories are properly installed and secured. Ensure that

applicable safety regulations are observed.

WARNING:

1. Use the device only in the manner intended.

2. Operate the device only with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the unit, check all cable routes to avoid damage or accidents, e.g.

due to tripping hazards.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

CAUTION:

1. In the case of moving components such as mounting brackets or other moving

components, there is a possibility of jamming.

2. In the case of units with motor-driven components, there is a risk of injury from the

movement of the unit. Sudden movement of the device can cause shock reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

lamp to cool sufficiently before removal, maintenance work and charging etc.

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ATTENTION:

1. Do not install or operate the device near any radiators, heat registers, stoves or

other heat sources. Ensure that the device is always installed in such a way that it

is sufficiently cooled and cannot overheat.

2. Do not place ignition sources such as burning candles near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or impact to the unit.

6. Observe the IP protection class as well as the ambient conditions such as tempera-

ture and humidity according to the specification.

7. Devices can be constantly further developed. In the event of deviating informati-

on on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always takes

priority.

8. The unit is not suitable for tropical climates and for operation above 2000 m above

sea level.

9. Unless explicitly stated, the unit is not suitable for operation in marine conditions.

NOTE:

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

4. Permanently installed lamps are built into these lighting units. These may not be repla-

ced by the user. The lamps contained in this lighting unit may only be replaced by the

manufacturer, its service partner, or a similarly qualified person.

SIGNAL TRANSMISSION BY RADIO (E.G. W-DMX OR AUDIO RADIO SYSTEMS):

The quality and performance of wireless signal transmissions generally depends on

the ambient conditions.

The following factors can impact range and signal stability, for example:

Shielding (e.g. masonry, metal structures, water)

High volume of radio traffic (e.g. powerful wireless LAN networks)

Interference

Electromagnetic radiation (e.g. LED video screens, dimmers)

All range specifications refer to free-field application with visual contact and without

interference!

The operation of transmission systems is subject to official regulations. These may

vary from region to region and must be checked by the operator before use (e.g. radio

frequency and transmission power).

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

Devices with wireless signal transmission are not suitable for use in sensitive areas in

which radio operation can lead to potential detrimental effects. These include:

• Hospitals, health centres or other healthcare facilities that provide patient treat-

ment with skilled personnel and equipment.

• Hazardous areas Class I, II and III

• Restricted areas

• Military facilities

• Aircraft or vehicles

• Areas where the use of mobile phones is prohibited

TRANSMISSION VIA W-DMX

WARNING: Ingeneral, wireless DMX transmission must not be used for applications

with safety-related factors that could result in personal injury or property damage in the

event of failure .

This applies in particular to moving scene or traverse structures, DMX-controlled mo-

tors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic systems

or comparable moving components.

Furthermore, wireless DMX transmission must not be used to trigger flame or pyro-

technic devices, explosion-driven effects, or to control gas or liquid effects. These

include CO2 cannons, confetti shooters, water effects or similar.

NOTES ON PORTABLE OUTDOOR DEVICES

1. Temporary operation! Event equipment is generally only designed for temporary

operation.

2. Continuous operation or permanent structural installation – particularly outdoors –

can impair the function, surfaces and seals and accelerate material fatigue.

3. Damage to the surface coating can impair the device‘s corrosion protection.

Damaged surface coating (e.g. scratches) must be promptly repaired by suitable

measures.

INCLUDED

Remove the product from the packaging and remove all packaging material.

Please check the completeness and integrity of the delivery and notify your distribution partner

immediately after purchase if the delivery is not complete or if it is damaged.

The packaging includes:

X1 x S2 IP Softlight spotlight

X1 x U-bracket (pre-assembled)

X1 x Omega double bracket

X1 x standard diffuser disc (pre-assembled)

X1 x 28 mm TV spigot incl. fastening screw M10 plus disc spring and washer

X1x Power cord

XUser manual

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Cameo Équipement d'éclairage

Cameo

Cameo FLAT PRO SPOTIX CLFLATPROSP4 Manuel utilisateur

Cameo

Cameo PIXBAR 600 PRO IP65 Manuel utilisateur

Cameo

Cameo H2 D Manuel utilisateur

Cameo

Cameo ZENIT P 40 Manuel utilisateur

Cameo

Cameo S4 IP Manuel utilisateur

Cameo

Cameo OPUS X WASH Manuel utilisateur

Cameo

Cameo CL 200 RB Manuel utilisateur

Cameo

Cameo PIXBAR DTW PRO Manuel utilisateur

Cameo

Cameo ZENIT W300i Manuel utilisateur

Cameo

Cameo AURO SPOT 300 Manuel utilisateur

Cameo

Cameo MULTI FXBAR Manuel utilisateur

Cameo

Cameo FLAT PRO 7 G2 Manuel utilisateur

Cameo

Cameo ZENIT W600 SMD Manuel utilisateur

Cameo

Cameo AURO SPOT 400 Manuel utilisateur

Cameo

Cameo CLSTROBE1 Manuel utilisateur

Cameo

Cameo OCTAFLY Manuel utilisateur

Cameo

Cameo HYDRABEAM 300 Manuel utilisateur

Cameo

Cameo CLSCAN60W Manuel utilisateur

Cameo

Cameo CLLIODA400RGY Manuel utilisateur

Cameo

Cameo OTOS SP6 Manuel utilisateur

Cameo

Cameo CL 200 G2 Manuel utilisateur

Cameo

Cameo CLPSTMINIQ8W Manuel utilisateur

Cameo

Cameo STUDIO PAR 4 G2 Manuel utilisateur

Cameo

Cameo FLAT PAR CAN CLPFLAT1TRI3WIR Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur