Camec RV Media Evolution 044694 Manuel utilisateur
说明书材质：
封面158G铜版纸,彩色印刷
内页黑白书写纸，A5
EVOLUTION
044694 32" SMART TV
12/24V FULL HD LED TV/PVR SMART TV with BLUETOOTH
Contents
What’s in the Box
Controls on the TV/Installation
TV Inputs and Outputs
Remote Control
5
6
7
8
MAIN MENU OPERATION
Picture Menu
Sound Menu
Time Menu
Option Menu
MEDIA PLAYBACK
Photo Viewer
Music Playback
Text Viewer
Movie Playback
17
18
21
23
26
27
27
28
Lock Menu 24
10
Installing Batteries in the remote
Cleaning and Maintenance
Troubleshooting
34
35
37
Specifications
Important Safety Instructions
PVR - Personal Video Recorder 25
Getting Started - Power Connection
11
First Time Installation
13
Using the EPG (Electronic Program Guide)
14
Channel 15
Low Battery Voltage Warning
12
SMART TV
Quick Start & General Information
Configuration
Home, Favourites & Web
Apps & Settings
29
30
32
33
• Before installing this TV set, make sure your outlet voltage corresponds to the
voltage stated on the appliance rating label of the power adaptor being used..
• Do not overload the power outlet.
• CAUTION
the power supply cord, plug and antenna cable to rain or moisture; do not use it
anywhere near water; do not touch the power plug with wet hands.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not allow anything to rest on or roll over the power cord and antenna cable.
Protect the cord and run all cables so that no one steps on or trips over them.
• Do not run the cord near heatproducing appliances such as radiators, stoves or
irons. The excessive heat could melt the insulation and expose live wires.
• When not in use, disconnect the power cord from the outlet. Hold the plug, not
the cord, when disconnecting the unit. Pulling the cord can damage the internal
wires and may cause a fire.
• Never touch the TV screen, antenna or cord during thunderstorms. Stop use
during thunderstorms; unplug the unit when a thunderstorm is approaching.
• Only use this TV with the power adaptors supplied. If either plug does not
fit into your outlets, consult your dealer or an RV service center for
replacement of the outlet.
IMPORTANT SAFETY INSTRUCTIONS
2
Position
• If a television is not positioned in a sufficiently stable location, when stand
mounted, it can potentially be hazardous if it falls. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
• Using cabinets, shelves or stands that provide a sturdy support for the TV and are
not in areas where the TV can be accidently knocked or bumped .
• Only using furniture that can safely support the television.
• Ensuring the TV is not overhanging the edge of the supporting furniture.
• Not placing the TV on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the TV to a suitable support.
• Educating children about the dangers of climbing up to reach the TV controls.
• Not standing the TV on cloth or other materials placed between the TV and
supporting furniture.
Usage conditions and restrictions
• Follow the instructions in this manual when installing and adjusting the TV set.
Only adjust those controls that are covered in this instruction manual; improper
adjustment of other controls may result in damage. If this happens, unplug the TV
and have it serviced by appropriately qualified personnel.
• Do not change or modify the TV set in any way. Only use the attachments/
accessories specified.
• Do not cover the ventilation openings with items such as newspapers, tablecloths,
curtains etc., as this could impede ventilation.
• Do not insert any objects of any kind into this unit through the ventilation slots or
DVD slot, as they could touch the currentcarrying parts or shortcircuit parts,
resulting in fire, electric shock or damage to the unit.
• Do not touch the screen with fingers, as this may scratch or smudge the TV screen.
• Do not expose the batteries to excessive heat such as sunshine, fire or the like.
• Unplug the TV set in all of the following circumstances:
• If it has been subject to impact or has been dropped and is damaged.
• If its voltage adaptor plugs, or the wall socket, are damaged.
• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the TV.
IMPORTANT SAFETY INSTRUCTIONS Cont’d
• When deciding where to put the TV set, make sure the location is:
• Well ventilated. Leave at least a 20cm space all around the TV set for good
ventilation.
• Protected from overheating and away from direct sunlight.
• Away from damp and cold.
• Away from areas with extremes of temperature (below 0°C or exceeding 40°C)
or moisture.
• Away from moisture drips or splashes.
• Protected from excessive dust.
• Do not install this equipment in a confined space such as a bookcase or similar.
• Do not put any objects filled with liquids, such as vases, on top of the TV set.
• Do not place any naked flame sources, such as lighted candles, on top of the TV.
IMPORTANT SAFETY INSTRUCTIONS Cont’d
Backlit Remote Control
32" Full HD TV
WHAT’S IN THE BOX
TV Stand Feet
240V Power adaptor
It is recommended that this TV be removed
NOTES:
Wall-Mounting
TV CONTROLSCONTROLS ON THE TV
INSTALLATION
3. VOL(+) - This button increases the TV’s volume. If the On Screen Display (OSD) menu is active,
pressing this button will move the selection to the right.
4. VOL(-) - This button decreases the TV’s volume. If the OSD menu is active, pressing this button will
move the selection to the left.
5. CH(+) - This button changes the TV channel upward. If the OSD menu is active, this button functions
as up control for the menu.
6. CH(-) - This button changes the TV channel down. If the OSD menu is active, this button functions as
down control for the menu.
7. MENU - This button activates the OSD menu. If a sub-menu is active, pressing this button will return
selection to the previous menu level.
8. INPUT - This button switches between all the different sources of the TV. When the OSD is active,
this button acts as the enter button and confirms the menu selection.
9. POWER ( ) - Turn on the TV by pressing the button once. Press the button again to turn off the TV.
from the wall bracket when the RV is in transit.
The distance between the holes is 200mm in width and 100mm in height.
If you are using a standard VESA 100 x 100 RV TV wall bracket, you will need
a 200 to 100mm converter bracket such as the TV Media 100 x 100 to
200 x 100 adaptor P/N 043042.
6
NOTE: Please, make sure the inputs and outputs have solid connections before
connecting power.
14
25
37
6
5. HDMI 2 Input Jack: HDMI 2 in.
4. HDMI 1 Input Jack: HDMI in.
10. Mini Y/Pb/Pr: Component Video in - use the supplied adaptor lead.
12. PC Audio Input Jack: Connect to the Audio Out jack of a computer.
6. VGA Input Jack: Connect to the VGA output jack on a personal computer.
7. RF Input: Connect to external antenna to receive DTV signal in DTV mode.
13. USB: TV USB Port for media playback when Media is the TV’s selected source.
11. Mini A/V In: Composite Video & Audio in (A/V).
3. AUDIO output: Audio output for external devices such as Head Units, amplifiers etc.
1. POWER (DC12/24V or plugpack) input.
9. Headphone Jack: Headphone output jack.
8. Coaxial Out: Digital Audio output for surround sound/sound bars etc.
TV INPUT & OUTPUTS
7
2. Video Out: This mirrors the Video Signal from Input 12 (A/V) ONLY. The output is Video only;
not audio.
15. Smart TV USB Inputs: Use for mouse or keyboard connection, install apps, play
14. RJ45 Network Cable In (24" only): For internet connection via a modem or router.
media via the Smart TV and update the Smart TV Firmware.
VGA
PC INPC INPC INPC IN
13
12
10
11
8
9
15
14
5V 500mA
Smart TV
5V 500mA RJ45
Table des matières
Autres manuels Camec Téléviseur LED
