CAMBRIONIX SyncPad54 Manuel utilisateur
User Manual
SyncPad54
SyncPad54 Page 1 of 15
Table of Contents
1.Your SyncPad54 at a glance 2
2.Product Specifications 3
2.1.Input Power 3
2.2.Output Power 3
2.3.Physical specifications 3
2.4.Power Supply Specifications 4
3.Safety 5
3.1.Signal word panel 5
3.2.Safety alert symbol 6
3.3.Pictograms 6
3.4.Product modification 6
3.5.Power supply 7
3.6.Storage and Installation 8
4.Getting Started 9
4.1.What's Included 9
4.2.Connecting to the mains 9
4.3.Previous versions of Windows 9
4.4.Registration 9
4.5.Help and Support 9
5.Charging without connecting to a host computer 10
6.Using when connected to a host computer 11
6.1.Charging 11
6.2.Data Transfer 11
7.Manage Ports & Devices using Cambrionix Software 12
7.1.LiveViewer 12
7.2.Cambrionix API 12
7.3.Command Line Instructions (CLI) 13
8.Certifications 15
SyncPad54 Page 2 of 15
1.Your SyncPad54 at a glance
The SyncPad54 has been designed primarily for desktop use, being highly compact and quiet. It
provides 2.5W Max per Port of charging power to each of its 54 x USB 2.0 Type-A ports, allow-
ing mobile devices to be charged quickly, safely and reliably. All ports can be controlled using
Cambrionix software to allow charging and/or data transfer while monitoring important port
and device information.
The SyncPad54 can charge attached USB devices without using a local computer and our intel-
ligent charging algorithm allows almost any device to be charged at its optimum rate (up to
0.5A Max per Port). The firmware can be up-dated to allow new charging profiles to be added,
ensuring the SyncPad54 can charge the latest devices. It is ready to charge out-of-the-box and
to sync devices when attached to a host computer.
When a local (host) computer is attached, the host can control operation of the ports using
freely available software. Device charging and synchronisation can be monitored through
Cambrionix’s LiveViewer App, the Application Programming Interface (API) or Command Line
Interface (CLI). Cambrionix’s free monitoring and control software can be downloaded from-
https://www.cambrionix.com/software
For the SyncPad54 a host will need to be connected to hub before initial charging will take
place, once the hub is up and running you will not need a host connected unless you power
cycle the hub in which case a host will need to be connected for the initial power up.
SyncPad54 Page 3 of 15
2.Product Specifications
2.1.Input Power
Input Voltage 12Vdc
Input Current 13A
Input Connection 4-Pin DIN
2.2.Output Power
Output Voltage 5.2V
Output Current 0.5A Max per Port
Output Power 2.5W Max per Port
Output Power (Total) 160W Maximum
2.3.Physical specifications
Input Connectors 1 x USB 2.0 Type-B
Output Connectors 54 x USB 2.0 Type-A
Ambient Operating Temperature range 0-35 °C
Relative humidity 5% to 95% non-condensing
Dimensions 430 x 86 x 28mm
Weight 1.5kg
SyncPad54 Page 4 of 15
2.4.Power Supply Specifications
Input Voltage 100-250Vdc
Input Current 2.5A @ 115Vac
Input Frequency 50-60Hz
Input Connector C14
Output Voltage 12Vdc
Output Current 15A
Output Power 180W
Output Connector 4-pin DIN
SyncPad54 Page 5 of 15
3.Safety
This user manual is for informational purposes only, it contains information for start-up and
operation of this product. Note: the contents and the product described are subject to change
without notice. To avoid injuries and damage observe the safety instructions of the user
manual.
Understanding and observing the instructions in this user manual are prerequisites for
hazard-free use and safety during operation. This user manual cannot cover all conceivable
applications. If you would like additional information or if problems arise that are not
sufficiently addressed in this manual please ask your distributor or contact us directly using the
means preferred which are located on the back cover of this manual.
Personal Injury and Damage to the product
lObserve the safety instructions in this user manual
3.1.Signal word panel
Depending on the probability of serious consequences, potential dangers are identified with a
signal word, the corresponding safety colour, and if appropriate, the safety alert symbol.
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or
minor (reversible) injury.
Indicates a potentially hazardous situation which, if not avoided, may result in damage to the
product and/ or its functions or of a property in its proximity.
SyncPad54 Page 6 of 15
3.2.Safety alert symbol
Use of the safety alert symbol indicates a risk of injury.
Observe all measures that are marked with the safety alert symbol in order to
avoid injury
3.3.Pictograms
Warning Signs
Electrical hazard Fire Hazard
Mandatory action signs
Read operating instructions Mandatory regulation
3.4.Product modification
Cambrionix products are designed and manufactured to meet the requirements of UK and
International safety regulations. Modifications to the product could affect safety and render the
product non-compliant to relevant safety standards, which could result in injury or damage to
the product.
Electric shock or personal injury may occur
lDo not modify the product in any way
lDo not dismantle the product
SyncPad54 Page 7 of 15
Fire or personal injury may occur
lDo not obstruct air vents on the product
lDo not cover the product in combustible material
Damage to your product may occur
lDo not bend or compress any part of the product
3.5.Power supply
This section describes safety precautions you must follow when using the power supply.
Electric shock or personal injury may occur
lDo not use a damaged power cord or plug, or a loose power socket
lDo not touch the power plug with wet hands
lDo not allow liquids to come into contact with the unit or power supply
Damage to your product may occur
lThe power cord must be disconnected to cut off power to the product
lDo not short circuit the Power Supply Unit (PSU) supplied with your
product
lDo not disconnect the power cord while the product is being used
lDo not bend or pull the power cord with excessive force
SyncPad54 Page 8 of 15
3.6.Storage and Installation
This section describes safety precautions you must follow when installing and storing your Syn-
cPad54.
Electric shock or personal injury may occur
lDo not place the power cord near heat sources
lConnect the plug to an earthed socket
Damage to your Cambrionix product may occur
lOperate the product only in an environment where the ambient
temperature is inside the operating temperature range
lOperate the product only in an environment where the relative humidity is
inside the operating range
lBe careful not to leave the power cord underneath a heavy object
Overheated power sockets may cause a fire
lDo not overload the power socket that your hub is connected to
lInsert the power plug all the way into the socket so that it is not loose
SyncPad54 Page 9 of 15
4.Getting Started
4.1.What's Included
l2m Mains power cable (Country specified on order)
l0.8m USB 2.0 Type-B data Updater Cable
lSyncPad54 Hub
lPower Supply Unit
4.2.Connecting to the mains
Connect the Power Supply Unit (PSU) to the hub using the 4-Pin DIN plug. Connect the power
cable to the PSU. Making sure you adhere to local safety regulations, connect the power cable
to the 100 – 250 Vac mains power outlet and switch the hub on using the small power switch
located adjacent to the power input connector on the hub. When the device is switched on, a
red LED will be illuminated. The hub is now ready to charge attached devices.
4.3.Previous versions of Windows
If you are using a version of Microsoft Windows prior to Windows 10 you will need to install
Cambrionix CDC drivers for enabling the full functionality of the hub. To install the drivers
please detach the hub from the PC before executing the downloaded installer. The installer will
prompt you for permission to install drivers signed by Cambrionix, please agree to this.
Once the installer has completed the installation of the drivers you may attach your hub.
Download the file at: https://www.cambrionix.com/software-archive
4.4.Registration
You may register you and your product athttps://cambrionix.com
to download LiveViewer and our API.
4.5.Help and Support
FAQs and support can be found on the Help & Support page here .ht-
tps://www.cambrionix.com/help_pages/help. You can raise a support ticket for more in depth
support here https://cambrionix.atlassian.net/servicedesk/customer/portals You can also down-
load any of our manuals and keep up to date at the link here https://www.cam-
brionix.com/product-user-guides
Autres manuels pour SyncPad54
4
Table des matières
Manuels duplicateur de disques populaires d'autres marques
Kanguru
Kanguru U2-DVDDUPE-S Manuel utilisateur
StarTech.com
StarTech.com 8STSATDUP11 Manuel utilisateur
DUPLO SEIKO CORPORATION
DUPLO SEIKO CORPORATION Duprinter DP-460 Manuel utilisateur
Addonics Technologies
Addonics Technologies UDFH7 Manuel utilisateur
Vinpower Digital
Vinpower Digital MiniLoader VDX-1 Manuel utilisateur
Addonics Technologies
Addonics Technologies CFASTD5 Manuel utilisateur