CAMBRIDGE EDGE M Manuel utilisateur

EDGE M

Manual Generated: 16/08/2022 - 03:01

Table of Contents

EDGE M 3 ...............................................................................................................................................................................................................................

Introduction 4 .......................................................................................................................................................................................................................

What’s included with the EDGE M? 5 ................................................................................................................................................................................

Front panel 6 .........................................................................................................................................................................................................................

Rear panel connections 7 ....................................................................................................................................................................................................

Getting connected 9 ............................................................................................................................................................................................................

Power syncing 12 .................................................................................................................................................................................................................

Protection circuitry 13 .........................................................................................................................................................................................................

Troubleshooting 14 ..............................................................................................................................................................................................................

Technical speciﬁcations 15 .................................................................................................................................................................................................

Frequently Asked Questions (FAQ) 17 ..............................................................................................................................................................................

EDGE M

Last updated: August 9, 2022 05:03. Revision #5716

Users Manual

Introduction

Last updated: August 9, 2022 05:03. Revision #5706

This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for

accuracy at the time of printing; however, Cambridge Audio’s policy is one of continuous improvement, therefore design and speciﬁcations are subject to

change without prior notice.

mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All trademarks and registered trademarks are

the property of their respective owners.

For upcoming news on future products, software updates and exclusive oﬀers, make sure you register your product

at https://www.cambridgeaudio.com/register

What’s included with the EDGE M?

Last updated: August 9, 2022 05:03. Revision #5707

Inside the box of your EDGE M you will receive:

EDGE M Monoblock Power Ampliﬁer1.

UK power cord (Depending on which country the EDGE M was purchased in)2.

EU power cord (Depending on which country the EDGE M was purchased in)

CU power cord (Depending on which country the EDGE M was purchased in)

JP power cord (Depending on which country the EDGE M was purchased in)

Link Cable3.

Instruction Manual4.

Warranty Card5.

Welcome Letter6.

Unboxing Card 7.

Front panel

Last updated: August 9, 2022 05:03. Revision #5708

1. STANDBY/ON - Switches the unit between Standby mode (indicated by dim LED) and On (indicated by bright LED). Standby mode is a low power

mode where the power consumption is less than 0.5 Watts.

AUTO POWER DOWN (APD)

The product will automatically switch to standby mode after inactivity of 20 minutes. To enable or disable this function, use the APD switch located on

the rear of the unit.

AUTO POWER UP (APU)

This product will automatically switch back on if it detects audio signal and will resume normal function. Auto Power Up will only work after the product

has Auto Powered Down on the same input.

Rear panel connections

Last updated: August 9, 2022 05:03. Revision #5709

1. VOLTAGE SELECTOR SWITCH

Note: For use by Cambridge Audio service personnel only!

2. AC POWER SOCKET

3. BALANCED/UNBALANCED INPUTS - The XLR input is balanced and the RCA input is unbalanced.

4. BALANCED/UNBALANCED SWITCH - Select depending on whether a source is connected to the balanced XLR or unbalanced RCA input.

Note: There will be no sound from the amp if the correct input isn’t selected. If a source is connected to the balanced input, for example, ensure that the

balanced switch has been selected.

5. LOOP OUT - The XLR output is balanced and the RCA output is unbalanced.

6. SPEAKER TERMINALS

Note: When using a banana plug, make sure the speaker terminals are completely tightened before inserting the plug.

Connect the wires from your left channel loudspeaker to the left positive and negative terminals and the wires from the right channel loudspeaker to the

right positive and negative terminals.

In each case, the red terminal is the positive output and the black terminal is the negative output.

Care should be taken to ensure no stray strands of wire short the speaker outputs together. Please ensure that the loudspeaker terminals have been

tightened completely to provide a good electrical connection.

It is possible for the sound quality to be aﬀected if the screw terminals are loose.

7. AUTO POWER DOWN (APD) SWITCH - Switches to enable or disable the Auto Power Down function. When enabled, the ampliﬁer will automatically

switch to standby mode after inactivity of 20 minutes.

8. LINK - Refer to the 'Power syncing' section of this manual for more information.

Getting connected

Last updated: August 9, 2022 05:03. Revision #5710

LOUDSPEAKERS

Check the impedance of your speakers. You can use types with an impedance of between 4 and 8 Ohms.

The red coloured speaker terminals are positive (+) and the black speaker terminals are negative (-). Make sure the correct polarity is maintained at

each speaker connector or the sound can become weak and “phasey” with little bass.

USING BARE WIRE CONNECTIONS

Prepare the speaker cords for connection by stripping oﬀ approximately 10mm (3/8”) or less of the outer insulation. More than 10mm could cause a

short circuit. Twist the wires tightly together so there are no loose ends. Unscrew the speaker terminal, insert the speaker cable, tighten the terminal

and secure the cable.

Note: All connections are made using standard loudspeaker cable.

USING BANANA PLUGS

We recommend using Banana plugs with our units to establish a secure connection and ensure there are no loose strands of wire that may cause

unwanted noise or interference.

Once you have stripped the outer insulation of the cable and twisted the wires as indicated below, securely connect these to your banana plugs and

push the plug in as far as possible without applying excessive force.

Note: When using a banana plug, make sure the speaker terminals are completely tightened before inserting the plug.