Cambridge Audio CXR200 ZONE 2 Manuel utilisateur

HDMI CONNECTION TO ZONE 2

PLAYING THE SAME VIDEO/AUDIO IN BOTH ZONES. .....2

HDMI CONNECTION TO ZONE 2

PLAYING DIFFERENT VIDEO/AUDIO IN EACH ZONE. .....3

PRE-OUT CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES. .....................4

PRE-OUT CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE. ....................5

SPEAKER CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES. .....................6

SPEAKER CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE. ....................7

TABLE OF CONTENTS

ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: Press and hold the Zone 2 button, then press the Standby button.

– Using the Cambridge Connect app.

– On the front panel: Press the Zone 2 button (Zone 2 will be shown on the display), then press

the Standby button.

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On.

2Setting the Zone 2 Source to ‘Follow Main Zone’ will ensure that any video/audio (multi-

channel or stereo) that is playing in the Main Zone will be duplicated and sent to Zone 2.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Follow Main Zone

- 30 dB

Any multi-channel audio source (eg. Blu-ray movie) playing in the Main Zone will be sent to the

Zone 2 TV as a 2CH PCM (stereo) downmix when Follow Main is selected.

Notes:

• Using HDMI connection for Zone 2 you will be using the TV in Zone 2 to play the audio and

video. The TV must have speakers.

• When using Follow Main, the same audio will be heard in both zones. Whatever source is

selected in the Main Zone will be repeated as stereo in Zone 2. This means that any source can

be heard in Zone 2.

ZONE 2 HDMI CONNECTION TO ZONE 2

PLAYING THE SAME VIDEO/AUDIO IN BOTH ZONES.

HDMI

Up to 7.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDE ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2:

– Using the remote: Press and hold the Zone 2 button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button (Zone 2 will be shown on the display), then press the

Standby button

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On

2The Zone 2 source can be selected using the remote control, front panel, app and the Zone

2 Settings menu.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Source 3

- 30 dB

When setting the Zone 2 Source to any source that is the dierent from the main zone, the ‘raw’

audio and video will be sent into Zone 2, as output by the source. The audio is not down-mixed

to stereo in Zone 2 if you are not using the Follow Main feature.

If the selected Zone 2 Source has a stereo audio signal (eg. 2.0CH satellite signal/FM/Stream

Magic) the Zone 2 TV will be able to play both the audio and video signal.

If the selected Zone 2 Source has a multi-channel audio signal (eg. BD player/5.1 satellite signal)

the Zone 2 TV must be able to play/decode multi-channel HDMI audio, otherwise no sound will

be heard in this case.

Notes:

• Using HDMI connection for Zone 2 you will be using the TV in Zone 2 to play the audio and

video. The TV must have speakers.

• In Zone 2, if you want to watch/listen to a dierent source to the Main Zone, then we recommend

that the Zone 2 TV is able to play/decode multi-channel HDMI audio. If not, then for multi-

channel audio sources, only the picture will be displayed in Zone 2.

• The TV source (ARC) is only available in Zone 2 when set to Follow Main.

ZONE 2 HDMI CONNECTION TO ZONE 2

PLAYING DIFFERENT VIDEO/AUDIO IN EACH ZONE.

HDMI

Up to 7.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: Press and hold the Zone 2 button, then press the Standby button.

– Using the Cambridge Connect app.

– On the front panel: Press the Zone 2 button (Zone 2 will be shown on the display), then press

the Standby button.

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On.

2Setting the Zone 2 Source to ‘Follow Main Zone’ will ensure that any audio (multi-channel or

stereo) that is playing in the Main Zone will be duplicated and sent to Zone 2.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Follow Main Zone

- 30 dB

Any multi-channel audio source (eg. Blu-ray movie) playing in the Main Zone will be sent to Zone

2 as a 2CH PCM (stereo) downmix when Follow Main is selected

Notes:

• When using Follow Main, the same audio will be heard in both zones. Whatever source is

selected in the Main Zone will be repeated as stereo in Zone 2. This means that any source can

be heard in Zone 2.

• It is not possible to congure the second subwoofer output for Zone 2 use.

ZONE 2 PRE-OUT CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES.

Up to 7.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDE ZONE 2 SETUP GUIDECXR200

ZONE 2

Up to 7.2 speaker connection

HDMI

MAIN ZONE

1Switch on Zone 2:

– Using the remote: Press and hold the Zone 2 button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button (Zone 2 will be shown on the display), then press the

Standby button

– In the Zone 2 Settings menu within the OSD: Zone 2 Power On

2The Zone 2 source can be selected using the remote control, front panel, app and the Zone

2 Settings menu.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Source 3

- 30 dB

When setting the Zone 2 Source to any source that is dierent from the main zone, only sources

with a 2CH PCM (stereo) audio signal are output to Zone 2.

If the selected Zone 2 Source has a multi-channel audio signal (eg. BD player/5.1 satellite signal)

this cannot be output to Zone 2 if the Follow Main feature is not being used.

Notes:

• In Zone 2, to watch/listen to a dierent source to the Main Zone, then the Zone 2 source must

be stereo.

• The FM/AM Tuner and Stream Magic Sources are stereo and can always be played in Zone 2.

If a source is set to use audio from an analogue input, or a digital input as 2CH PCM, then this

can also be played in Zone 2 whilst a dierent source is being played in the Main Zone.

• A source using audio from HDMI or a digital input must be set to 2CH PCM to be played in Zone

2 whilst a dierent source is playing in the Main Zone

• When Zone 2 is On, the HDMI 2 output is also set to Zone 2. It is not possible to use the twin

HDMI outputs for dual (mirrored) displays when Zone 2 Power is On (unless using the Follow

Main feature).

• It is not possible to congure the second subwoofer output for Zone 2 use.

• The TV source (ARC) is only available in Zone 2 when set to Follow Main.

PRE-OUT CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE.

ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: press and hold the Zone 2

button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button

(Zone 2 will be shown on the display), then

press the Standby button

– In the Zone 2 Settings menu within the OSD:

Zone 2 Power On

2Ensure the Back Amp channels are set to

‘Zone 2’ in the Speaker Setup.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Speaker Configuration

Auto Setup

Unit

SW Selection

Back Amp Configuration

►

Metres

Subwoofer1+Subwoofer2

Zone 2

3Setting the Zone 2 Source to ‘Follow Main

Zone’ will ensure that any audio (multi-

channel or stereo) that is playing in the Main

Zone will be duplicated and sent to Zone 2.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Follow Main Zone

- 30 dB

Any multi-channel audio source (eg. Blu-ray

movie) playing in the Main Zone will be sent to

Zone 2 as a 2CH PCM (stereo) downmix when

Follow Main is selected.

Notes:

• When using Follow Main, the same audio will be heard in both zones. Whatever source is

selected in the Main Zone will be repeated as stereo in Zone 2.

• When congured for Zone 2, the back amp channels cannot be used for bi-amping or 7.2 in the

main zone. 5.2 speaker channels is the maximum speaker conguration in the main zone when

using the zone 2 speaker output.

• It is not possible to congure the second subwoofer output for Zone 2 use.

ZONE 2 SPEAKER CONNECTION TO ZONE 2

PLAYING THE SAME AUDIO IN BOTH ZONES.

Up to 5.2 speaker connection

HDMI

MAIN ZONE

ZONE 2 SETUP GUIDE ZONE 2 SETUP GUIDECXR200

1Switch on Zone 2

– Using the remote: press and hold the Zone 2

button, then press the Standby button

– Using the Cambridge Connect app

– On Front panel: press the Zone 2 button

(Zone 2 will be shown on the display), then

press the Standby button

– In the Zone 2 Settings menu within the OSD:

Zone 2 Power On

2Ensure the Back Amp channels are set to

‘Zone 2’ in the Speaker Setup.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Speaker Configuration

Auto Setup

Unit

SW Selection

Back Amp Configuration

►

Metres

Subwoofer1+Subwoofer2

Zone 2

3The Zone 2 source can be selected using

the remote control, front panel, app and the

Zone 2 Settings menu.

CXR Setup Menu

Speaker Setup

Input Setup

Zone 2 Settings

Network Setup

General Settings

HDMI Output Setup

Advanced Setup

Zone 2 Power

Zone 2 Source

Zone 2 Power On Volume

Source 3

- 30 dB

When setting the Zone 2 Source to any source

that is dierent from the main zone, only

sources with a 2CH PCM (stereo) audio signal

are output to Zone 2.

If the selected Zone 2 Source has a multi-

channel audio signal (eg. BD player/5.1 satellite

signal) this cannot be sent to Zone 2 if the

Follow Main feature is not being used.

ZONE 2

Up to 5.2 speaker connection

HDMI

MAIN ZONE

SPEAKER CONNECTION TO ZONE 2

PLAYING DIFFERENT AUDIO IN EACH ZONE.

Notes:

• In Zone 2, to watch/listen to a dierent source

to the Main Zone, the Zone 2 source must be

stereo.

• The FM/AM Tuner and Stream Magic Sources

are stereo and can always be played in

Zone 2. If a source is set to use audio from

an analogue input, or a digital input as 2CH

PCM, then this can also be played in Zone 2

whilst a dierent source is being played in the

Main Zone.

• A source using audio from HDMI or a digital

input must be set to 2CH PCM to be played

in Zone 2 whilst a dierent source is playing

in the Main Zone.

• When congured for Zone 2, the back amp

channels cannot be used for bi-amping or 7.2

in the main zone. 5.2 speaker channels is the

maximum speaker conguration in the main

zone when using the zone 2 speaker output.

• It is not possible to congure the second

subwoofer output for Zone 2 use.

• The TV source (ARC) is only available in Zone

2 when set to Follow Main.

• When Zone 2 is On, the HDMI 2 output is also

set to Zone 2. It is not possible to use the twin

HDMI outputs for dual (mirrored) displays

when Zone 2 Power is On (unless using the

Follow Main feature).

Table des matières

Autres manuels Cambridge Audio Amplificateur

Cambridge Audio

Cambridge Audio 851W Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 540A Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 540A V2.0 Manuel utilisateur

Cambridge Audio

Cambridge Audio azur 840A Manuel

Cambridge Audio

Cambridge Audio AZUR 840A V2 Manuel utilisateur

Cambridge Audio

Cambridge Audio TOPAZ AM1 Manuel utilisateur

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 540P Manuel utilisateur

Cambridge Audio

Cambridge Audio EDGE M Manuel utilisateur

Cambridge Audio

Cambridge Audio 851E Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 640A Manuel utilisateur

Cambridge Audio

Cambridge Audio AZUR 550A Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 540A V2 Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 840E Manuel

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Guide de l'administrateur

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manuel utilisateur

Cambridge Audio

Cambridge Audio Alva Solo Manuel utilisateur

Cambridge Audio

Cambridge Audio EDGE M Manuel utilisateur

Cambridge Audio

Cambridge Audio CXA60 Manuel utilisateur

Cambridge Audio

Cambridge Audio EDGE A Manuel utilisateur

Cambridge Audio

Cambridge Audio AXA25 Manuel utilisateur

Cambridge Audio

Cambridge Audio Azur 340A Manuel utilisateur

Cambridge Audio

Cambridge Audio Edge NQ Manuel utilisateur

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manuel

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur