Caliber HWS 301 Manuel utilisateur
EASY INSTALL
ANYONE CAN DO IT
Instruction manual for
HWS 301
Tap to jump to
The pictures/screenshots/illustrations used in this manual are subject to change without notication. Also they may dier in apearance, depending on the device you
use, iOs or Android, tablet or phone etc. Product and software update periodically, the number and App interface in this manual are only shown as an example. No
extra notication on further changes.
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 1 Download and install Caliber Smart Home APP
Use your phone to scan the QR code below or search “Caliber Smart Home” in the app
Store or Google play to download and install the App Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 2 Register / Login / Request password
Register
If you don’t have the an account on ‘Caliber Smart Home’ APP, register an account or
sign-in with cellphone number + verification code.
This page describes the Registration process.
1. Tap “Register” in the lower centre ”img 1”
2. The system automatically determines your country / area. You can also select your
country code by yourself.
Enter the cellphone number / E-mail and tap“Obtain verification code”“img 2”
3. If you enter your mobile cellphone number, enter the verification code from the
message “img 3”.
4. Choose a password for your account “img 4”, tap ”Confirm” to finish your registration.
img 1 img 2 img 3 img 4
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 2 Register / Login / Request password
Account+password sign-in
1. The system will automatically determine your
country / area or you could select manually
2. Enter your registered cellphone number or
email and password, sign in to the system
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 2 Register / Login / Request password
Forgot password
If you forgot your account of “Caliber Smart Home”, you can reset the account password
by “Request password”
1. Tap “Forgot password”, as shown in “img 1”
2. The system automatically determines your country / area. You can also select your
country code by yourself. Enter the cellphone number/E-mail and tap “Obtain
verification code”, as shown in “img 3”
3. Enter the verication code from the message/E-mail , as shown in “img 3”.
4. Enter the new password, tap ”Conrm” to nish.
img 2 img 3 img 4img 1
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 3 ADD device(‘s) EZ-mode
1. Go to the App, tap “+” in the upper right of
this page to add device’s as shown in the
picture to the left.
2. In this case, select “Motion Sensor (Wi)”
3. For EZ mode, please make sure the device’s
indicator light ashes quickly, tap “Conrm
indicator rapidly blink” to continue.
Remarks:
App provides two methods of network connection:
EZ mode and AP mode. Please use EZ mode as
default. If it failed, please tap “AP mode” in the
upper right to try connecting again.
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 3 ADD device(‘s) EZ-mode
ADD device in EZ mode (default)
Press and hold the reset button (3) on the rear for 5 sec.
The LED will blink fast in EZ mode (3 times/per second).
Remarks: If indicator light is slowly ashing (Once per 2s), it indicates that device is under
AP mode. Long press reset button for 5 seconds to switch the modes.
12
3
Reset Button
LED indicator
5V DC input
Micro USB
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 3 ADD device(‘s) EZ-mode
ADD device in EZ mode (default)
Next step: conrm the WiFi for device
connection and enter the password. Tap
“Conrm” and start connecting the device.
(remarks: only supports 2.4G Wi-Fi network), as
shown in the picture.
The connection process takes up to 30 sec.
If EZ mode fails, try AP mode.
Remarks:
The purpose of this step is to let the “Caliber Smart
Home” APP know which
router to use for Wi-Fi network connection. After
a successful setup, the device will automatically
connect to the Wi-Fi network.
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
No. 3 ADD device(‘s) EZ-mode successful
Connecting
Now the connection status shows. “Device added!” notication will show after device
is successfully connected. Tap“Completed” and the interface jump to the device’s user
interface. Then you could start making changes or monitor the device.
Tap the edit symbol : or to make changes in the name etc.
img 1 img 2 img 3 img 4
Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Add device(‘s)
• EZ-mode
• AP-mode
No. 4 Control device
No. 5 Profile
No. 6 Scene’s &
Automation
No. 7 Voice control
No. 8 Trouble shooting
No. 9 Privacy policy
Table des matières
Autres manuels Caliber Accessoires
