Cablescan 90 Series Guide de l'utilisateur
Cablescan
Series 90
SETUP MANUAL
9
0
90
May 25, 2006
Series 90
SETUP MANUAL
(Part Number 5900407)
Cablescan
A Eubanks Company
3022 Inland Empire Blvd.
Ontario, California 91764
(909) 483-2436 Fax (909) 483-2463
www.cablescan.com
Page iv Series 90 Setup Manual
COPYRIGHT NOTICE
This manual is proprietary, copyrighted material. No part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and
recording, for any purpose other than the purchaser's personal use, without written permission of
Cablescan Inc.
Copyright ©1999 – 2006 Cablescan Inc. All rights reserved.
THIS IS A LIMITED WARRANTY
CABLESCAN (hereinafter “CABLESCAN”) products are warranted to the original owner for a
period of twelve (12) months from the date of shipment from CABLESCAN’s factory, or in the
first 2,080 hours of operation by the customer (whichever comes first), to be free from defects in
material and workmanship for the use for which they are intended by CABLESCAN, under
normal operating conditions and maintenance.
CABLESCAN’s obligation under this Warranty is limited, upon prompt notification, to the
repair or exchange at the CABLECAN factory of any CABLESCAN product or part which
proves to be defective. If a product under warranty is returned to the CABLESCAN factory for
repair or replacement, freight charges will be borne by the customer in accordance with
CABLECAN’s policy of selling F.O.B. the CABLESCAN factory. If repairs are made at the
customer’s factory, the customer will bear the cost of the service person’s travel and living
expenses.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY STATES CABLESCAN’S
ENTIRE AND EXCLUSIVE LIABILITY WHETHER IN TORT OR IN CONTRACT AND
BUYER’S EXCLUSIVE REMEDY FOR ANY CLAIM FOR DAMAGES IN CONNECTION
WITH THE SALE OR USE OF CABLESCAN’S PRODUCTS, THEIR DESIGN,
SUITABILITY FOR USE, INSTALLATION OR OPERATION, OR FOR ANY CLAIMED
DEFECTS THEREIN. UNDER NO CIRCUMSTANCES WILL CABLESCAN BE LIABLE
FOR ANY CONSEQUENTIAL, INCIDENTAL, ECONOMIC, DIRECT, INDIRECT,
GENERAL, OR SPECIAL DAMAGES. NO ACTION UNDER THIS WARRANTY MAY BE
BROUGHT BY BUYER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS
OCCURRED.
This warranty does not apply to equipment or replacement parts that have not been given proper
care and maintenance and does not cover any defect, failure, deficiency, or error that is:
a) Not reported to Cablescan within the applicable warranty period;
b) Due to accident, misapplication, negligence, modification, alteration, disassembly, abuse,
misuse, abnormal conditions of temperature, dirt, or corrosive matter; or
c) Due to operation, either intentional or otherwise, above rated capacities, or in an
otherwise improper manner.
If it is determined that the equipment defect is not the result of original manufacture but is
related to customer negligence or operational error, the customer will pay all incurred charges
including, but not limited to, parts and labor.
Series 90 Setup Manual Page v
TABLE OF CONTENTS
Series 90 Family of Test Systems....................................................... 1
Series 90/Series 90HV ..................................................................................1
Series 90L4/Series 90H8...............................................................................1
System Components ........................................................................... 4
Series 90.........................................................................................................4
Series 90HV...................................................................................................4
Series 90 System Controller ........................................................................4
Expansion Cabinets......................................................................................5
Series 90................................................................................................5
Series 90HV..........................................................................................5
Series 90L4/H8..............................................................................................5
Series 90 System Setup....................................................................... 6
Unpacking.....................................................................................................6
Power Connection ........................................................................................6
Grounding the Unit...............................................................................6
Power Cords.........................................................................................6
Series 90/Series 90HV System Controller INterfacing.......7
Rear Panel........................................................................................7
I/O Board..............................................................................................7
Series 90/90HV Connection Procedure......................................................8
Basic System Hookup............................................................................8
Adding Expansion Cabinets..................................................................9
Series 90L4/Series 90H8 Scanner Control.........................................10
Series 90L4/H8 Connection Procedure..............................................10
Adding Scanner Boards.............................................................................11
Series 90E9/Series 90E32 Cabinets ...................................................11
Series 90HV23 Cabinet.......................................................................12
Series 90L4/H8 Cabinet......................................................................13
Low-voltage Scanner Board Jumpers.................................................14
Scanner Board Pins and Test Point Assignments.......................... 15
Series 90 Low-Voltage Systems.................................................................15
Series 90 High Voltage Systems ................................................................16
Page vi Series 90 Setup Manual
TABLE OF CONTENTS - Continued
Interface Cable Assemblies and connectors................................... 17
Low-voltage Interface Cables....................................................................17
5210914-03 Cable Assembly ..............................................................17
5210917-03 Cable Assembly ..............................................................17
5210982 Cable Assembly....................................................................18
High-voltage Interface Cables and connectors........................................19
5211036 Connector Kit.......................................................................19
5211037 Cable Assembly....................................................................19
5211038 Cable Assembly....................................................................19
5211088 Connector Kit.......................................................................19
Remote Signals.................................................................................. 21
Signal Timing..............................................................................................21
Output Connectors.....................................................................................22
Vacuum Fixture Operation.......................................................................22
TestDiag............................................................................................. 23
The TestDiag Program...............................................................................23
Starting TestDiag........................................................................................23
TestDiag Opening Screen ..........................................................................24
Control Menu.............................................................................................24
Title Bar..............................................................................................24
Control Menu......................................................................................24
Menu Bar............................................................................................25
Status Banner......................................................................................25
Test Results Window...........................................................................25
Status Bar............................................................................................25
TestDiag Menus..........................................................................................26
File Menu............................................................................................26
Tester Menu........................................................................................26
Diagnose System.......................................................................26
Settings......................................................................................26
Reset..........................................................................................28
View Menu..........................................................................................28
Help Menu ..........................................................................................28
Series 90 Setup Manual Page vii
TABLE OF CONTENTS - Continued
Diagnostic Tests ................................................................................ 29
Test Range...................................................................................................29
Test Level..................................................................................29
Point Count ...............................................................................29
Loop Self Test...........................................................................29
Command Buttons......................................................................................30
Diag ....................................................................................................30
Adv......................................................................................................30
Download Firmware..................................................................30
Capacitance Offset Function.....................................................30
Set Voltage Type.......................................................................30
Reset....................................................................................................30
Low-Voltage Tests......................................................................................31
Application..........................................................................................31
Test Descriptions................................................................................31
Enable........................................................................................31
System Status............................................................................31
Short Test..................................................................................31
Sense Line Test.........................................................................31
Raw FET On Test......................................................................31
Raw FET Off Test.....................................................................31
Resistor Bank............................................................................31
High-Voltage Tests.....................................................................................32
Application..........................................................................................32
Test Descriptions................................................................................32
Enable........................................................................................32
High-Voltage Gen.....................................................................32
High Voltage Dis ......................................................................32
High Current Select...................................................................32
Scanner Relay ...........................................................................32
High Voltage Select ..................................................................32
High Current Gen......................................................................32
Scanner Relay Res ....................................................................33
Isolation Amplifier....................................................................33
Controller Leakage....................................................................33
System Leakage ........................................................................33
Shorting Bar Size......................................................................33
Sense Resistor...........................................................................33
Voltage Type.............................................................................33
Page viii Series 90 Setup Manual
TABLE OF CONTENTS - Continued
Series 90 Calibration ........................................................................ 34
Purpose........................................................................................................34
Low-voltage Test Procedure...............................................................35
High-voltage Test Procedure..............................................................36
Fuse Replacement............................................................................. 38
Series 90S9 and Series 90S32 Fuse Replacement ....................................38
Series 90L4/H8 Fuse Replacement............................................................39
Care of Series 90 ............................................................................... 40
Maintenance................................................................................................40
Repair..........................................................................................................40
Handling Circuit Boards ...........................................................................40
Shipping and Storage.................................................................................40
Replacement Parts......................................................................................41
Specifications..................................................................................... 42
Appendix A - Scanner Resistor Bank............................................ 44
Appendix B – Calibration Boards................................................... 45
Series 90 Setup Manual Page ix
LIST OF FIGURES
Figure Description Page
1The Series 90 Test Systems .........................................................................2
2The Series 90HV Test System.....................................................................3
3The Series 90 Series 90L4 and 90Series Series 90H8 Test Systems...........3
4Series 90/90HV Simplified Diagram...........................................................4
5Series 90L4/H8 Simplified Diagram ...........................................................5
6System Controller Board Locations.............................................................7
7Series 90/90HV Cable Connections ............................................................8
8Multiple Expansion Cabinet Hookup ..........................................................9
9Series 90L4/H8 Cable Connections...........................................................10
10 Series 90E9 Scanner Board Locations.......................................................11
11 Series 90HV Scanner Board Locations .....................................................12
12 Series 90L4/H8 Scanner Board Locations.................................................13
13 Scanner Board Jumpers..............................................................................14
14 Low-voltage Scanner Board Layouts ........................................................15
15 High-voltage Scanner Board Layouts........................................................16
16 Low-voltage Cable Assembly –5210917-03 .............................................17
17 Low-voltage Cable Assembly –5210982...................................................18
18 High-voltage Cable Assembly –5211037..................................................19
19 Signal Timing Diagram..............................................................................21
20 Fuse Locations – Early Model Expansion Cabinet....................................38
21 Series 90L4/90H8 Fuse Locations.............................................................39
Page x Series 90 Setup Manual
ABOUT THIS MANUAL
This manual provides setup and installation information on all Cablescan Series 90 Test
Systems:
Low Voltage Models High Voltage Models
Series 90 Series 90HV
Series 90L4 Series 90H8
Information that is not identified by model number(s) pertains to all models. Where information
is identified by certain models, read the portions pertaining to your model.
Before attempting to operate your model of the Series 90, be sure to read this manual until you
understand it. Then, when first using your Series 90, follow the manual as closely as necessary
to achieve proper operation. When you eventually develop mastery of the system, you will
continue to turn to the manual as a reference.
Information in this manual supports a second volume, "Series 90 Software Manual."
If you have a question or problem regarding this manual, please contact Cablescan.
Autres manuels pour 90 Series
2
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Cablescan Équipement de test
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
