Visit us at &")&$%#for international toll free information 3
A
!%"
e) Do not overreach. Keep proper footing and balance at all times. This enables better control
of the ower tool in unex ected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving arts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related hazards.
$!"
a) Do not force the power tool. Use the correct power tool for your application. The correct
ower tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn ON and OFF. Any ower tool that cannot
be controlled with the switch is dangerous and must be re aired.
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such reventive safety measures reduce the risk
of starting the ower tool accidently.
d) Store idle power tools out of the reach of children. Do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of children.
e) Properly maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by oorly maintained ower tools.
f) Keep cutting tools sharp and clean. Pro erly maintained cutting tools with shar cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the ower tool for o erations different
than intended could result in a hazardous situation.
#
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the ower tool is maintained.
" !
#! !!Make sure the switch is in the "OFF" position before
plugging in.
$% $!$!Wait for the sanding belt to come to a complete stop
before any type of adjustment or maintenance.
$%#!
$% $" ! !The mask filter should be
replaced regularly.
! should be done in the work area to prevent
ingesting glass particles.
