Byhann BH-FW960PW Manuel utilisateur
SMART HOME WIFI CAMERA
USER MANUAL
BH-FW960PW
SHENZHEN BYHANN TECHNOLOGY CO.,LIMITED
CATALOGUE
Package Contents…………………………………………………………………1
Main Features………………………………………………………………………1
Technical Parameters……………………………………………………………1
Button Details……………………………………………………………………..3
How to connect WiFi camera………………………………………………..3
Smartlink……………………………………………………………………………………….………..5
For Wired connection…………………………………………………………….……………………6
For AP connection…
………………………………………………………………………….…….….6
How to Setup WiFi camera………………………………………………………………7
Part 1: to know the operation button………………………………………….…….…………
7
Part 2: Basic operation………………………………………………………….…….……………..
8
Part 3: How to set up the system…
……………………………………………….….…………9
FAQ…
……………………………………………………………………………………….……………13
Package Contents
ByHann Smart Home Wifi Camera x1
Power Adapter with USB cable x1
Quick Installation Guide x1
Mounting Accessories
Screws Accessories
Main Features
Housing: Cute housing design, support rotation (PTZ)
Len: 960P High Definition lens with vivid image
Led: Build in light compensation IR Led, support night vision 30Feets
Support Wired network/ WIFI connection
Adapted H.264 video compression
Support remote access by mobile device(windows phone ,iPhone, Android, PAD)
Support TF Card ( Max 64G), Real time HD 960P video
Support motion detection, protection alarm, send message and email to phone
Technical Parameters
Features
Model:
BH-FW960PW
PNP
Plug and Play, easy operation
PC monitor
Internet Explorer 6.0 or higher version, Firefox, chrome
Phone
monitor
Support multi-channel monitor via smart phone
(for iphone, ipad, android phone, tablet pc)
IR-CUT
Built in IR-CUT, no color cast in day, clear image at night
Night vision
11pcs IR led lights, for night vision up to 30feets
WPS function
Support, 1 button of easy connect WIFI router
With TF card slot
Support Max. TF card 64GB
Alarms
Motion detection, E-mail alarm
Audio
Audio in
Build in 1pc MIC
Audio out
Build in 1pc HD speaker
Video
Compression
format
H.264 High Profile, MJPEG snapshot
Signal system
1/3” CMOS
Frame rate
30fps
Shutter speed
1/50s-1/100,000s
Resolution
1280*960
Image adjustment
Brightness, contrast, saturation.
WB, BLC
Auto
PTZ
Pan:355° , Tilt:120°
Reset button
Restore to factory default
Low Illumination
Color: 0.5Lux @(F1.2,AGC ON),0 LUX with IR
Black/White:0.05 Lux@(F1.2,AGC ON),0 LUX with IR
Shutter
1/50(1/60) second to 1/100,000 second
Lens
3.6 mm
Network
Network interface
RJ-45 10/100Mb self-adaptable Ethernet slot
Protocol
Support ONVIF, TCP/IP, HTTP, ICMP, DHCP, FTP, SMTP, PPPoE etc.
Wireless
WIFI,802.11 b/g
Online visitor
Support 4 visitors at the same time
IP mode
Dynamic IP address, static IP address, PPPOE
Alarm
Alarm Detection
Support motion detection
Alarm action
E-mail pictures /upload video by FTP/messages alarm
(coordinate to server)
Others
Use environment
indoor use
Power
DC 5V / 2A
Temperature
from -10~55
Humidity
10-90% RH
Device Size
92mm× 92mm× 123mm
Net weight
0.7lb
Attachment
Camera, bracket, Power adapter, manual, screws
System requireme
nt
Microsoft Win98 SE/ME/2000/XP,Vista,Win 7, Internet Explorer 8.0,
FireFox,Google Browser
Certificate
FCC CE Rohs
Button Details
How to connect camera to smart phone ?
Step 1: Connect power adaptor to your camera
Step 2: Download Yoosee APP to your phone or computer
1) Open www.yoosee.co to download. You can select Android, IOS or PC well.
2) For Smart phone, you can search “Yoosee”in smart phone APP store, or scan
your package box QR code as following:
For Android For IOS
Step 3: Install the APP and Register by Mobile or Email
Insert your phone number or email, then set up one password to login. Now you
own one Yoosee Account yet.
Step 4: Add device
1) Click the upper right “+”to add
2) It will show three optional. But the third type is to add NVR, not wifi camera.
For “Add new device”, usually recommend “Smartlink”:
Input your local WiFi password and click Next.
Camera will speak a prompt tone “Waiting to connect”.
After 20-30 seconds it will connect well. You can view the real time video now.
Notes: 1. Be patient to click Next when hear prompt tone, otherwise would cause
fail to connect;
2.If can not connect, click the Reset button 3 seconds until hear “Reset Successful”.
Then repeat the above steps. Or take out the power for a while, connect again. The
camera will auto turn pan or tilt. Then click Reset and repeat above steps.
For Wired connection
1) Connect the device’s internet access to the router’s LAN port using cable.
2) Click Next then add the “device list”. Make one name for your device. The default
device password is generally on the label at the bottom or back of the device.
3) Usually its default password is 123456. Finally click Save.
For AP connection
1) Power on, and the device is waiting to connect
2) Input your local wifi name and password, creating a visiting password.
3) Phone search the wifi “GW_IPC_*******” that emit by camera, which default
password is “12345678”. Open the Yoosee you can preview the video.
Notes: If fail to connect, maybe some latest smart phone, or firmware version
doesn’t support this AP connect; The device does not emit a beep for connection.
Please try to connect by Smartlink or Wired connect.
How to use the WiFi camera by phone?
Part 1: to know the operation button
1: To edit the camera name which show in your phone;
2: Show the device situation Online or Offline. Click the above screen you can view
real time video demo;
3: Red means the password is too simple. Click here you can modify this device
password;
4: Defense/Disarming setup. You can set up which period to defense;
5: Playback the video we record before;
6: Settings about Device info, Time setting, Security setting, Defense Settings etc;
7: Speaker on/off. When turn off we can not here the device voice;
8: Full or half screen to view the video;
9: Record the video;
10: Intercom button. Keep pressing to talk between phone and device, when release
button it means stop talking;
11: Capture the photo;
12: Defense/Disarming setup.
13: Position of device, it does not support yet.
The above button mainly under “Device”menu. Others:
Message: information from alarm inform, motion detect etc;
Image: the capture photo or video file;
My: Account info, System setting, About Yoosee, Exit account, software update etc;
Part 2: Basic operation
1. Real time video monitor. When connect well, click screen to view;
2. Pan/Tilt function. At the video screen click right/left the device will turn right/left;
when click up/down it will turn up/down. The Pan is max 355° and Tilt is max 120°;
3. SD/HD/LD: it means Standard demo/High Demo/Low demo. Click here you can
select which resolution you like. Usually device would adjust the resolution according
different network speed;
Table des matières
