Bush DLED48287FHD Manuel utilisateur

3

2Connect the antenna to your TV

Connect the TV to the mains socket

...and switch on

insert plug...

UK plug

4To switch the TV on

Insert the batteries into the Remote Control

1

Lift the cover on the back of the remote gently. Insert two

AAA batteries. Make sure the (+) and (-) signs match

(observe correct polarity). Place the cover back on.

1. Connect the power cord to the 220-240V AC, 50 Hz.

Then the standby LED lights up.

To switch on the TV from standby mode either:

2. Press the “ ” button, P/CH+ / P/CH- or a numeric button

on the remote control or;

3. Press the control switch located on the left side of the

TV.

By either method the TV will switch on.

REAR OF THE TV

Quick Start Guide DLED48287FHD

Helpline No: 0345 6040105

Start Auto Setup procedure

Important note: Ensure that the aerial is connected and a Common Interface

module is not inserted before switching on the TV for the first time installation.

Do not insert a common interface module during the search process.

1. When the TV is turned on for the first time the language screen will

be displayed. Select the desired language using Up or Down

button and press OK to save and continue.

2. After setting the language, First Time Installation screen wil be

displayed. Use Up/Down and Left/Right buttons to set the

desired options.

HDMI input

PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF BEFORE

CONNECTING. Use a HDMI to HDMI cable to connect the two units together.

To select the HDMI input, press the “SOURCE” button on the remote control.

Each time it is pressed the on-screen menu confirms your selection.

6

5

3. “Do you want to start automatic search?" message will be

displayed on the screen. Select YES and press OK to continue.

The TV will search for digital terrestrial broadcasts. After all the

available stations are stored, Channel List will be displayed on the

screen. If you like to sort channels, according to the LCN(*), please

select “Yes” and then press OK. (*) LCN is the Logical Channel

Number system that organizes available broadcasts in

accordance with a recognizable channel sequence.

50345148

SOURCESOURCE

To HDMI connection on

the device

Table des matières

Autres manuels Bush Téléviseur LED

Manuels Téléviseur LED populaires d'autres marques

LG

LG 43UF680T-TA Manuel utilisateur

Samsung

Samsung QE43LS03A Manuel utilisateur

Philips

Philips 55PUS6272/12 Manuel utilisateur

TCL

TCL L40E3020F Manuel utilisateur

Seiki

Seiki SC-55AU300 Manuel utilisateur

Sharp

Sharp AQUOS LC-60LE650U Manuel utilisateur

Durabase

Durabase L24H472S4VD Manuel utilisateur

LG

LG 32LH51 series Manuel utilisateur

Tesla

Tesla 43K625BUS Manuel utilisateur

Changhong Electric

Changhong Electric UD55GHE6000Ai Manuel utilisateur

LG

LG LN41 Series Manuel utilisateur

Sharp

Sharp LC-32LE511E Manuel utilisateur

Samsung

Samsung The Terrace LST7T Series Manuel utilisateur

Saba

Saba SB40FDS195 Manuel utilisateur

LG

LG TL43 Series Manuel utilisateur

LG

LG 22LN413Y-TD Manuel utilisateur

Philips

Philips 43PFT5102 Manuel utilisateur

SWEDX

SWEDX SS-42K15 Manuel utilisateur