Bush Hog BBC 48 Manuel utilisateur

OPERATION ll MAINTENANCE

807 $4.00 50047324

BBC 48 / BBC 60

Box Blades

OOppeerraattoorr’’ss MMaannuuaall

BUSH HOG®

All manuals and user guides at all-guides.com

all-guides.com

CONGRATULATIONS!

You have invested in the best implement of its type on the market today.

The care you give your Bush og implement will greatly determine your satisfaction

with its performance and its service life. We urge a careful study of this manual to provide

you with a thorough understanding of your new implement before operating, as well as

suggestions for operation and maintenance.

If your manual should become lost or destroyed, Bush og will be glad to provide you with

a new copy. Order from Bush og, P. O. Box 1039, Selma, Alabama 36702-1039. Most of

our manuals can also be downloaded from our website at website at www.bushhog.com.

As an authorized Bush og dealer, we stock genuine Bush og parts which are

manufactured with the same precision and skill as our original equipment. Our trained

service personnel are well informed on methods required to service Bush og equipment,

and are ready and able to help you.

Should you require additional information or assistance, please contact us.

YOUR AUT ORIZED

BUS OG DEALER

BECAUSE BUS OG MAINTAINS AN ONGOING

PROGRAM OF PRODUCT IMPROVEMENT, WE

RESERVE T E RIG T TO MAKE IMPROVEMENTS IN

DESIGN OR C ANGES IN SPECIFICATIONS WIT -

OUT INCURRING ANY OBLIGATION TO INSTALL

T EM ON UNITS PREVIOUSLY SOLD.

BECAUSE OF T E POSSIBILITY T AT SOME

P OTOGRAP S IN T IS MANUAL WERE TAKEN OF

PROTOTYPE MODELS, PRODUCTION MODELS MAY

VARY IN SOME DETAIL. IN ADDITION, SOME

P OTOGRAP S MAY S OW S IELDS REMOVED

FOR PURPOSES OF CLARITY. NEVER OPERATE

T IS IMPLEMENT WIT OUT ALL S IELDS IN PLACE.

All manuals and user guides at all-guides.com

RETAIL CUSTOMER’S RESPONSIBILITY

UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate,

lubricate, maintain and store the product in accordance with all instructions and safety procedures.

Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s)

repaired or replaced when continued operation would cause damage or excessive wear to other parts

or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from

whom he purchased it, for service or replacement of defective parts which are covered by warranty.

Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling

of the product for the purpose of performing a warranty obligation or inspection.

BUSH HOG

BBC BOX BLADE

OPERATOR’S MANUAL

TABLE OF CONTENTS

SECTION PAGE

Warranty -------------------------------2

Dealer Preparation Check List ---3

Safety Precautions------------------4

Laws and Regulations--------------5

Specifications-------------------------6

I OPERATION--------------------------6

SECTION PAGE

Attachment----------------------------6

Detaching From Tractor -----------6

Operation------------------------------7

II MAINTENANCE ---------------------7

III Safety Decals ------------------------8

Torque Specifications--------------9

All manuals and user guides at all-guides.com

LIMITED WARRANTY

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

Bush og warrants to the original purchaser of any new Bush og equipment, purchased from an

authorized Bush og dealer, that the equipment be free from defects in material and workmanship for a period

of one (1) year for non-commercial, state, and municipalities’ use and ninety (90) days for commercial use from

date of retail sale. The obligation of Bush og to the purchaser under this warranty is limited to the repair or

replacement of defective parts.

Replacement or repair parts installed in the equipment covered by this limited warranty are warranted

for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equip-

ment warranty period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an

authorized Bush og dealer during regular working hours. Bush og reserves the right to inspect any equip-

ment or parts which are claimed to have been defective in material or workmanship.

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES

Bush og’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all war-

ranties, implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to

the sale or use of the items warranted. Such incidental and consequential damages shall include but not be

limited to: transportation charges other than normal freight charges; cost of installation other than cost

approved by Bush og; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of

income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of

equipment or parts resulting from acts beyond the control of Bush og.

THIS LIMITED WARRANTY SHALL NOT APPLY:

1. To vendor items which carry their own warranties, such as engines, tires, and tubes.

2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.

3. If parts not made or supplied by Bush og have been used in connection with the unit, if, in the sole judge-

ment of Bush og such use affects its performance, stability or reliability.

4. If the unit has been altered or repaired outside of an authorized Bush og dealership in a manner

which, in the sole judgement of Bush og, affects its performance, stability or reliability.

5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid,

worn blades, or to normal deterioration of such things as belts and exterior finish due to use or

exposure.

6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the

company’s sole judgement is a wear item.

NO EMPLOYEE OR REPRESENTATIVE OF BUS OG IS AUT ORIZED TO C ANGE T IS LIM-

ITED WARRANTY IN ANY WAY OR GRANT ANY OT ER WARRANTY UNLESS SUC C ANGE IS MADE

IN WRITING AND SIGNED BY BUS OG’S SERVICE MANAGER, POST OFFICE BOX 1039, SELMA,

ALABAMA 36702-1039.

OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

MODEL NUMBER

SERIAL NUMBER

DATE OF RETAIL SALE

Record the model number, serial number and date

purchased. This information will be helpful to your

dealer if parts or service are required.

MAKE CERTAIN T E WARRANTY REGISTRATION

CARD AS BEEN FILED WIT BUS OG/

SELMA, ALABAMA

All manuals and user guides at all-guides.com

DEALER PREPARATION C ECK LIST

BOX BLADES

BEFORE DELIVERING MAC INE — The following check list should be completed.

Use the Operator’s Manual as a guide.

r1. Assembly completed.

r2. All fasteners torqued to specifications given in Torque Chart.

r3. All decals in place and readable. (See decal page.)

r4. Overall condition good (i.e. paint, welds)

r5. Operators manual has been delivered to owner and he has been instructed on the

safe and proper use of the implement.

Dealer’s Signature

T IS C ECKLIST TO REMAIN IN OWNER’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

All manuals and user guides at all-guides.com

IMPORTANT SAFETY PRECAUTIONS

In addition to the design and configuration of equipment, hazard control and accident prevention are depen-

dent upon the awareness, concern, prudence and proper training of personnel in the operation, transport,

maintenance and storage of equipment. Lack of attention to safety can result in accident, personal injury,

reduction of efficiency and worst of all—loss of life. Watch for safety hazards and correct deficiencies prompt-

ly. Use the following safety precautions as a general guide to safe operations when using this machine.

Additional safety precautions are used throughout this manual for specific operating and maintenance proce-

dures. Read this manual and review the safety precautions often until you know the limitations.

1. Read the Operator’s Manual. Failure to read the Operator’s Manual is considered a misuse of this

equipment.

2. Become familiar with all the machine’s controls and all the caution, warning and danger decals

affixed to the machine before attempting to start or operate.

3. Before starting or operating the machine, make a walk around inspection and check for obvious

defects such as loose mounting bolts and damaged components. Correct any deficiency before

starting.

4. Do not allow children to operate the implement. Do not allow adults to operate it without proper

instruction.

5. Do not carry passengers.

6. Keep the area of operation clear of all persons, particularly small children and pets. The operator

should cease operation whenever anyone comes within the area.

7. Lower implement to ground, stop tractor engine and apply parking brake before leaving the tractor.

8. Keep hands and feet away from implement.

9. Wear personal protective equipment such as, but not limited to, protection for eyes, ears, feet,

hands and head when operating or repairing the equipment. Do not wear loose clothing or jewelry

that may catch on equipment moving parts.

10. When performing adjustments or maintenance on the implement, first lower it to the ground or block

it securely at a workable height.

11. Never stand between tractor and implement while tractor is being backed to the hitch.

12. Reduce speed when transporting implement to avoid bouncing and momentary loss of steering.

13. Use tractor flashing warning lights, day or night, when transporting implement on road or highways

unless prohibited by law.

14. Use a Rollover Protective Structure (ROPS) and seat belt equipped tractor for all implement operations.

This symbol is used to call attention to safe-

ty precautions that should be followed by

the operator to avoid accidents. When you

see this symbol, carefully read the message

that follows and heed its advice. Failure to

comply with safety precautions could result

in serious bodily injury.

All manuals and user guides at all-guides.com

all-guides.com

IMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNING

EMPLOYERS, EMPLOYEES AND OPERATIONS.

*(This section is intended to explain in broad terms the concept and effect of the following federal laws and

regulations. It is not intended as a legal interpretation of the laws and should not be considered as such).

U.S. Public Law 91-596 (The Williams-Steiger Occupational and ealth Act of 1970) OS A

This Act Seeks:

“...to assure so far as possible every working man and woman in the nation safe and healthful working

conditions and to preserve our human resources...”

DUTIES

Sec. 5 (a) Each employer—

(1) shall furnish to each of his employees employment and a place of employment

which are free from recognized hazards that are causing or are likely to cause

death or serious physical harm to his employees;

(2) shall comply with occupational safety and health standards promulgated under

this Act.

(b) Each employee shall comply with occupational safety and health standards

and all rules, regulations and orders issued pursuant to this Act which are

applicable to his own actions and conduct.

OSHA Regulations

Current OS A regulations state in part: “At the time of initial assignment and at least annually thereafter, the

employer shall instruct every employee in the safe operation and servicing of all equipment with which the

employee is, or will be involved.” These will include (but are not limited to) instructions to:

Keep all guards in place when the machine is in operation;

Permit no riders on equipment;

Stop engine, disconnect the power source, and wait for all machine movement to stop before

servicing, adjusting, cleaning or unclogging the equipment, except where the machine must be

running to be properly serviced or maintained, in which case the employer shall instruct employees

as to all steps and procedures which are necessary to safely service or maintain the equipment.

Make sure everyone is clear of machinery before starting the engine, engaging power, or operating

the machine.

Child Labor Under 16 Years Old

Some regulations specify that no one under the age of 16 may operate power machinery. It is your

responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of

Labor, Employment Standard Administration, Wage & ome Division, Child Labor Bulletin #102.)

EMPLOYEE TRACTOR OPERATING INSTRUCTIONS:

1. Securely fasten your seat belt if the tractor has a

ROPS.

2. Where possible, avoid operating the tractor near

ditches, embankments, and holes.

3. Reduce speed when turning, crossing slopes, and

on rough, slick, or muddy surfaces.

4. Stay off slopes too steep for safe operation.

5. Watch where you are going, especially at row

ends, on roads, and around trees.

6. Do not permit others to ride.

7. Operate the tractor smoothly - no jerky turns,

starts, or stops.

8. itch only to the drawbar and hitch points recom-

mended by tractor manufacturers.

9. When tractor is stopped, set brakes securely and

use park lock if available.

All manuals and user guides at all-guides.com

Figure 1

Lower Lift Arm Pins

Mast

Scarifier Shank

Top Center Link

Mounting Position

DURING BLADE AD USTMENT

KEEP BODY, HANDS AND FEET CLEAR

OF BLADE.

ATTACHMENT

The box blade should be placed on level ground.

Place the tractor rockshaft control in “position con-

trol” (non-floating) for attaching and detaching the

rear mounted blade. “Draft control” or “position con-

trol” can be used while operating.

Back the tractor until the ends of the lift arms can be

attached to the lift pins on the implement.

Attach the center link to the top of the mast and

adjust so that the blade frame will be level in the

operating position.

DETACHING FROM TRACTOR

Lower the blade to the ground with rockshaft control

in position control. Remove top link from mast, dis-

connect hitch arms from bottom pins and pull tractor

away from blade.

SECTION I

OPERATION

NOTE: Hitch pins can be mounted extending

toward the outside or center of the implement to

fit different tractor lift arms. Secure the lift arms

to the pins. (Figure 1)

WARNING

MODEL BBC-48 BBC-60

Working Width 48” 60”

Moldboard Height 11-1/2” 11-1/2”

Box Depth 12” 12”

Overall Depth 18-3/4” 18-3/4”

Overall Height 26-1/4” 26-1/4”

Overall Width 48-3/4” 60-3/4”

Side Sheet Thick. 1/4” 1/4”

Scarifier Size 3/4” x 2-1/2” 3/4” x 2-1/2”

Scarifier Teeth 45

Hitch Category 1 Category 1

Lower Hitch Cat 1 Pin Cat 1 Pin

Cutting Edge 1/2” x 6” 1/2” x 6”

Number of Blades 22

Approx. Weight 248 lbs. 258 lbs.

Tractor HP 24 (Maximum) 24 (Maximum)

SPECIFICATIONS

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

All manuals and user guides at all-guides.com

OPERATION

Level the box blade from side to side and front to

rear using adjustments on the tractor’s 3-point lift.

To adjust the scarifier shanks, first remove the pins

which hold the shanks in place. Slide the shanks up

or down to desired position and replace the pins.

(Figure 3)

The scarifiers should be adjusted to the lowest posi-

tion to penetrate and break up the surface when

moving large volumes of soil. When leveling, the tips

should be positioned to barely chip the surface, and

when smoothing, the tips should completely clear

the ground.

Care should be exercised during use of the box

blade to prevent hanging the scarifier points or the

blades on immovable objects or otherwise use the

implement under conditions beyond its designed

capacity.

WHEN EQUIPMENT IS TRANSPORTED, USE

NECESSARY DEVICES REQUIRED BY LOCAL

REGULATIONS FOR ADEQUATE WARNING

TO OPERATORS OF OTHER VEHICLES.

LOWER THE BLADE AS MUCH AS POS-

SIBLE AND SECURELY SUPPORT

BEFORE MAKING ANY AD USTMENT.

Inspect your box scraper periodically and replace

any worn or broken parts in order to have it ready

for use when needed.

Worn scarifier tips may be replaced by grinding

or torching off the old tips and welding on

replacements. (Figure 3)

Store the box blade out of the weather when it is not

in use. This helps prevent rusting of the blades and

other components.

SECTION II - MAINTENANCE

Keep all blade nuts and bolts tightened to 175 ft. lbs.

Blades can be reversed to use opposite cutting edge

when needed. (Figure 2)

CAUTION

Scarifier Shank

Adjustment Pin

Figure 3

Replaceable

Tips

Reversible Blade

All manuals and user guides at all-guides.com

SAFETY DECALS

To promote safe operation, Bush og supplies safety decals on all products manufactured. Because damages

can occur to safety decals either through shipment, use or reconditioning, Bush og will, upon request, provide

safety decals for any of our products in the field at no charge. Contact your authorized Bush og dealer for

more information.

All manuals and user guides at all-guides.com

Autres manuels pour BBC 48

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Bush Hog Tondeuse à gazon

Bush Hog

Bush Hog HDZ-2 Series Manuel utilisateur

Bush Hog

Bush Hog DHM Series Manuel utilisateur

Bush Hog

Bush Hog BH300 Series Manuel utilisateur

Bush Hog

Bush Hog HDE2049KT4 Manuel utilisateur

Bush Hog

Bush Hog RDTH SERIES RDTH 60 Manuel d'utilisation et d'entretien

Bush Hog

Bush Hog 4810RR1 Manuel utilisateur

Bush Hog

Bush Hog ZERO TURN MOWERS Manuel utilisateur

Bush Hog

Bush Hog DHM7 Manuel utilisateur

Bush Hog

Bush Hog 2310 Series Manuel utilisateur

Bush Hog

Bush Hog TOUGH TD-1100 Manuel utilisateur

Bush Hog

Bush Hog HM2008 Manuel utilisateur

Bush Hog

Bush Hog HDC-2 Series Manuel utilisateur

Bush Hog

Bush Hog TDR-11 Manuel utilisateur

Bush Hog

Bush Hog HDZ-3 Series Manuel utilisateur

Bush Hog

Bush Hog estate series Manuel utilisateur

Bush Hog

Bush Hog 50045565 Manuel utilisateur

Bush Hog

Bush Hog HDE-3 Series Manuel utilisateur

Bush Hog

Bush Hog BH400 Series Manuel utilisateur

Bush Hog

Bush Hog HDZ2661VG Manuel utilisateur

Bush Hog

Bush Hog Home Series Manuel utilisateur

Bush Hog

Bush Hog 2208 Series Manuel utilisateur

Bush Hog

Bush Hog BH200 Series Manuel utilisateur

Bush Hog

Bush Hog 3510R Manuel utilisateur

Bush Hog

Bush Hog 3308-2 Series Manuel utilisateur

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur