Burtonsafes PS310 Manuel utilisateur
1
USER
INSTRUCTION GUIDE
Issue PR2
Burton Safes is a specialist supplier of physical security
solutions. Founded in 1990, near Huddersfield, we are
proud of our Yorkshire heritage, whilst maintaining a
global outlook.
We offer our customers a large range of products
including safes, secure cabinets, vaults & secure rooms,
security doors, grilles, key safes and locking systems.
We also deliver bespoke solutions and 24/7after sales
service throughout the UK.
We believe passionately in the independent testing and
certification of our products. We use some of Europe’s
best-known laboratories to rigorously test our products
and to ensure production quality. As a result, our
products are widely accepted by the UK Insurance
Industry, Government and Secured by Design, the UK
Police’s Preferred Specification scheme.
We hope that you are satisfied with your recent purchase.
If you need any assistance, please call us on 01484 663388
can find lots of useful information in our website
knowledge bank www.burtonsafes.co.uk
Who are Burton Safes?
Thank you
for your purchase from
3
CONTENTS
Key Locking
PS310 Lock
Eurovault Aver S2
Burton Home Safe
Eurovault Aver G0
Firesec 4/60
Burton Duo Lock
Eurovault Aver Grade 1-5
Firesec 10/60
Fire Resistant Cabinet Lock
Firebrand Lock
Firebrand & Firebrand XL
Fixing Guide
Warranty
Page
4
5
10
13
16
18
19
USER INSTRUCTIONS - KEY LOCKING
How to open the safe
ABOUT THE KEY LOCK
The safes are supplied with 2 keys. Keep the keys in a secure place - but not in the
safe! If both keys are lost, the safe will have to be forced open.
Please note that the key will only fit inside the lock in one position. Do not force the
key into the lock.
• Insert the key into the key hole
• Turn the key clockwise until it stops
• Rotate the handle until the bolts are fully retracted
• Open the door
NOTE: If your safe has dual key locking you must unlock the top lock first. If you have a dual key
and electronic locking safe, unlock the key lock first then follow the Burton Duo instructions in the
booklet for the electronic lock.
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the
handle)
• Gently push the door shut. Always ensure that there are no
objects or people in the way of the closing door
• Turn the handle until the bolts are fully engaged
• Turn the key anti-clockwise until it stops
• Remove the key from the lock
5
USER INSTRUCTIONS - PS310 LOCK
How to open the safe
ABOUT THE LOCK
This lock requires a 6-digit code to open the
lock. You can have a master code and up to 9
user codes. In order to activate the user codes,
you will need the master code. The master code
can’t be deleted but you can remove user codes.
The lock also features dual code opening and
time delay opening.
• Press the [ON] key
• Enter a valid 6-digit code (the factory default is ‘123456’)
• Press the [ENTER] key
• Within 4 seconds, turn the handle clockwise until the stop position is
reached
• Open the safe door
Incorrect Entry
• If an incorrect code has been entered, the red LED will flash
• After 3 incorrect entries, a penalty time of 1 minute will begin. During
this time no other code entries can be made
• When the penalty time is over press the [ON] key
• Enter a valid 6-digit code
NOTE: Everytime an incorrect entry code is entered continuously the penalty time is
extended for 2, 4, 8, up to the maximum of 16 minutes
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle anti-clockwise until the stop position is reached
Changing the master code
• Open the lock using a valid 6-digit master code
• Open the safe door
• Press the [ON] key
• Press the [ENTER] key
• Press key [1] followed by the [ENTER] key
• Enter the existing 6-digit master code (the factory default is ‘123456’)
• Press the [ENTER] key
• Enter a new 6-digit code followed by the [ENTER] key
• Re-enter the new 6-digit code, then press the [ENTER] key to confirm
Activating a user code
(using the master code)
There are 9 user codes under the user numbers 1-9. To set up a user
code, you need to input the user number first.
• Press the [ON] key
• Press the [ENTER] key
• Press key [2] followed by the [ENTER] key
• Enter the user number you want to set up, i.e. enter key [1] for user
number 1 or key [2] for user number 2 and so on
• Press the [ENTER] key
• Enter the 6-digit MASTER code followed by the [ENTER] key
• Enter a new 6-digit code for your chosen user code
• Press the [ENTER] key
• Re-enter the new 6-digit user code, then press the [ENTER] key to
confirm
• Press the [ON] key
• Press the [ENTER] key
• Press key [0] followed by the [ENTER] key
• Enter the user number for the code you wish to delete, i.e. key [2]
• Press the [ENTER] key
• Enter the existing 6-digit MASTER code followed by the [ENTER] key
Deleting a user code
(using the master code)
7
• Press the [ON] key
• Press the [ENTER] key
• Press key [3] followed by the [ENTER] key
• Enter the user number for the code you wish to change, i.e. key [2]
• Enter the existing 6-digit user code
• Press the [ENTER] key
• Enter a new 6-digit code followed by the [ENTER] key
• Re-enter the new 6-digit code, then press the [ENTER] key to confirm
Changing a user code
(using a user code)
Turning on the Dual Code function
The Dual Code function means that you will require 2 different codes to
open the safe, the master code and any other user code. Ensure that you
have at least one user code programmed in the lock as well as the master
code before you turn on this function.
• Press the [ON] key
• Press the [ENTER] key
• Press key [7] followed by the [ENTER] key
• Enter the 6-digit master code followed by the [ENTER] key
Opening the safe with the Dual Code function
• Press the [ON] key
• Press key [0] followed by the [ENTER] key
• Enter the 6-digit master code followed by the [ENTER] key
• Within 1 minute enter a user number i.e. press key [2], followed by the
[ENTER] key
• Enter the 6-digit user code for that user followed by the [ENTER] key
Turning off the Dual Code function
• Press the [ON] key
• Press the [ENTER] key
• Press key [8] followed by the [ENTER] key
• Enter the 6-digit master code followed by the [ENTER] key
Programming the Time Delay
A Time Delay is the time you have to wait in between the entry of your
code and the opening of your safe. An Open Window is the amount of
time you have to open your safe after the time delay. For example, if
you wanted a 30 minute Time Delay and a 9 minute Open Window, this
would mean that once you have entered a valid 6-digit code, you have
to wait 30 minutes before you can open the safe door. After 30 minutes
you will have 9 minutes to open the safe door. If you wait longer than 9
minutes, you have to start the process again. In this lock you can program
a Time Delay from 1 - 99 minutes and an Open Window of 1 - 9 minutes.
• Press the [ON] key
• Press the [ENTER] key
• Press key [6] followed by the [ENTER] key
• Enter the 6-digit master code followed by the [ENTER] key
• Enter the 3 digits for your Time Delay and Open Window, i.e. [3][0][9]
(this would be for a 30 minute Time Delay and a 9 minute Open
Window)
• Press the [ENTER] key
Opening the safe with the Time Delay
• Press the [ON] key
• Enter a valid 6-digit code
• Press the [ENTER] key
• Wait for the Time Delay to finish. An acoustic signal will sound when
the Time Delay is over, i.e. 30 minutes
• Re-enter the same 6-digit code during the Open Window
• Press the [ENTER] key
How to remove the Time Delay
• Press the [ON] key
• Press the [ENTER] key
• Press key [6] followed by the [ENTER] key
• Enter the 6-digit master code followed by the [ENTER] key
• Enter [0][0][0]
• Press the [ENTER] key
• Within 4 seconds, turn the handle clockwise until the stop position is
reached
• Open the safe door
9
Power supply / Battery change
A series of beeps indicates that the battery is weak and must be replaced.
• Only use 9V ALKALINE batteries with this lock
• Burton Safes recommend the Duracell brand
To change the battery, you will need to open the safe and remove the
plate on the back of the door with a small screwdriver.
Press the catch on the top edge of the battery
cover with a screwdriver and lever off the battery
lid. Pull the battery out carefully until the battery
clip is visable. Release the battery from the clip
and replace. When the new battery is in place,
re-engage the lid.
Please ensure that the cable is not damaged.
Emergency power supply
• If the safe has run out of power hold a 9V
Duracell battery to the front of the
lock against the + and - connectors
• While keeping contact at all times
with the battery, press the [ON] key
• Enter a valid 6-digit code followed
by the [ENTER] key
• Within 4 seconds, turn the handle
clockwise until the stop position is reached
• Once inside the safe, follow the above instructions
to change the battery
USER INSTRUCTIONS - BURTON DUO LOCK (SWING BOLT)
How to open the safe
ABOUT THE LOCK
This lock requires a 6-digit code to open the
lock. You can have 2 different codes on this lock,
the master code and the secondary code. This
lock can also have a time delay activated of 1-99
minutes and an open period of 1-19 minutes.
• Enter a valid 6-digit code (the factory default is ‘123456’)
• If the code has been entered correct the lock will beep twice
• Within 3 seconds turn the handle to the open position
• Open the safe door
Incorrect Entry
• If an incorrect code has been entered, it will be followed by a long beep
• After 4 incorrect entries, a penalty time of 5 minutes will begin. During
this time, no other code entries can be made
• When the penalty time is over enter a valid 6 digit code
NOTE: 2 more consecutive invalid codes will restart an additional 5 minutes penalty time
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle bar anti-clockwise until the stop position is reached
Table des matières
Autres manuels Burtonsafes Sûr
Burtonsafes
Burtonsafes BRIXIA Manuel utilisateur
Burtonsafes
Burtonsafes HOTEL POP UP Manuel utilisateur
Burtonsafes
Burtonsafes HOTEL PRIMO Manuel utilisateur
Burtonsafes
Burtonsafes Biosec Home Manuel utilisateur
Burtonsafes
Burtonsafes Hotel Standard Manuel utilisateur
Burtonsafes
Burtonsafes AVER S2 Instructions d'installation
Burtonsafes
Burtonsafes BURTON Home S2 Manuel utilisateur
Burtonsafes
Burtonsafes Hotel Standard Manuel utilisateur
Burtonsafes
Burtonsafes Torino GMT/4P Manuel utilisateur
Burtonsafes
Burtonsafes PRIMO HOME SAFE Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard Jupiter Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard XL Manuel utilisateur
Burtonsafes
Burtonsafes KS Series Manuel utilisateur
Burtonsafes
Burtonsafes OCULTO Manuel utilisateur
Burtonsafes
Burtonsafes FIRESEC 4/60 Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard Combi Manuel utilisateur
Burtonsafes
Burtonsafes Standard MK/II Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard DigitalXL Manuel utilisateur
Burtonsafes
Burtonsafes BURTON HOME G1 Manuel utilisateur
Manuels Sûr populaires d'autres marques
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Honeywell
Honeywell 5912 Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
