Burtonsafes FIREBRAND Manuel utilisateur
How to open the safe
• Press the [*] key
• Enter a valid 4-6 digit code (the factory default is ‘123456’)
• Press the [ENTER] key
• While the green LED is flashing, turn the handle counter clockwise until
it stops and open the safe door
USER INSTRUCTIONS - FIREBRAND
ABOUT THE LOCK
This lock requires a 4-6 digit code to open the
lock. You can have 2 different codes on this lock,
the master code and the secondary code. The
secondary code must be activated, you will need
the master code to activate the secondary code. The
master code can’t be deleted but you can remove the
secondary code.
Incorrect entry
• An incorrect code entry will be followed by a red LED flash and 3
acoustic signals
• After 3 wrong entries, a penalty period of 5 minutes will begin; this is
indicated by the red LED flashing every 5 seconds
• After the 5 minute penalty time, you can try again
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle clockwise until the stop position is reached
Changing the master code
• Press the [*] key
• Press the [ENTER]
• Press key [1] followed by the [ENTER] key
• Enter the existing 4-6 digit master code followed by the [ENTER] key
Page 1 of 2
V. 1
25/10/2018
15
•Enter a new code for the master code followed by the [ENTER] key
• Re-enter the new code followed by the [ENTER] key to confirm
• Press the [*] key
• Press the [ENTER] key
• Press key [2] followed by the [ENTER] key
• Enter the MASTER code followed by the [ENTER] key
• Enter a new 4-6 digit code for the SECONDARY code followed by the
[ENTER] key
• Re-enter the new code followed by the [ENTER] key to confirm
Activating / changing the secondary code
(using the master code)
• Press the [*] key
• Press the [ENTER] key
• Press key [3] followed by the [ENTER] key
• Enter the existing secondary code followed by the [ENTER] key
• Enter a new 4-6 digit code for the secondary code followed by the
[ENTER] key
• Re-enter the new code followed by the [ENTER] key to confirm
Changing the secondary code
(using the secondary code)
• Press the [*] key
• Press the [ENTER] key
• Press key [0] followed by the [ENTER] key
• Enter the master code followed by the [ENTER] key
Deleting the secondary code
(using the master code)
Current supply / battery change
A series of beeps indicates that the battery is weak and must be replaced.
Only use a 9V ALKALINE battery. (Burton Safes recommend the
Duracell brand).
Take care when changing batteries, to ensure that no cables are damaged.
Page 2 of 2
V. 1
25/10/2018
Table des matières
Autres manuels Burtonsafes Verrouillage
Burtonsafes
Burtonsafes KEYGUARD XL DIGITAL Manuel utilisateur
Burtonsafes
Burtonsafes KeyGuard digital xl Manuel utilisateur
Burtonsafes
Burtonsafes BURTON DUO DEAD - BOLT Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard XL Digital Manuel utilisateur
Burtonsafes
Burtonsafes PS310 Manuel utilisateur
Burtonsafes
Burtonsafes KS Manuel utilisateur
Burtonsafes
Burtonsafes Keyguard XL Digital Manuel utilisateur
Burtonsafes
Burtonsafes KEYGUARD KEY SAFE 74 Manuel utilisateur
Burtonsafes
Burtonsafes KEYGUARD XL DIGITAL Manuel utilisateur
Burtonsafes
Burtonsafes Burton Duo FPC-1808-II VdS Manuel utilisateur
