BURG WATCHER Door eGuard DG 8200 Manuel utilisateur
BURG-WÄCHTER KG
Altenhofer Weg 15
58300 Wetter
GermanyDoor eGuard DG 8200 06/2017
www.burg.biz
<1sec.
4,0“ TFT
105°
14–26 mm
38–110 mm
4x
AAA
SD
25+2000
OUTDOOR
INDOOR
Door eGuard DG 8200
Operating Instructions
Door eGuard
English |2
Structure
Figure
Digital spyhole
Charge indicator lamp
1 attachment screw
4 x AAA batteries
Holding plate
Camera
Fastening sleeve
Tightening tool
· All rights reserved including any changes of product appearance,
technical function and usage without prior notice to users.
· Use of this product other than that for which it is intended for or
any modification to the original specification will invalidate any
guarantee given.
· Use of this product in any environment or in any way other than
specified here will also invalidate the guarantee.
Attention
1. Please read this user manual carefully before using our product.
2. Never attempt to repair or modify this product or its accessories by
yourself, to avoid injury and invalidating guarantee!
3. Any accidental factor such as being struck by lightning or any incorrect
operation could cause
a memory loss on the micro sd-card.
Keeping copies of the pictures is strongly recommended in case of
memory loss. We are not responsible for any loss of data.
4. DO NOT use any chemicals to clean this product, such as alcohol or
benzene thinner.
5. Please change the batteries soon after the low-battery indicator shows,
in order to avoid any damage to this product which could be caused by
battery weeping.
Dear customer,
thank you very much for deciding for Door eGuard manufactured by
BURG-WÄCHTER. Door eGuard is a battery-operated system with a camera
and colour monitor, easy to install and providing its user with the certainty
of being able to see anything happening outside the entrance door without
being seen. Thanks to its large adjustment range, this door spyhole can
be used with any common door with a thickness from 38 to 110mm. The
camera optics can cover existing holes in the door of 14– 26mm. Thanks to
the camera optics with a large viewing angle, even persons hidden near the
door can be identified.
Important: Please read the entire User Manual before you start to
mount the device.
Let us wish you a high level of security and
quality of living with your electronic spyhole.
Your BURG-WÄCHTER KG
Installation instructions
1. Fixing the camera on the outside of the door.
Replace the existing door position or drill a
14mm hole at the desired position. Peel off the 3M protective film and
then guide the camera into the hole from the outside. Take care that the
cable is guided through the door without kinks. Make sure that the bell
push button is located under the camera and align the camera vertical to
the floor before fixing the camera to the door.
2. Attaching the monitor holder.
Release the monitor holding plate from the rear of the monitor by
unscrewing the screw on the bottom of the monitor using a screwdriver.
Peel off the 3M protective film from the rear of the holding plate and
guide the camera cable through the hole in the middle. Make sure that
the arrow on the holding plate points upwards before fixing the holding
plate with the 3M adhesive strip to the inside of the door. Pull the camera
cable through the fixing sleeve and screw this tight using the enclosed
assembly tool.
Door eGuard
English |3
3. SD card
Insert a micro SD card into the card slot in order to be able to save more
than 25 images and export data. To open the SD slot, push the sheet
metal holder towards the bottom of the device. Now the slot can be
folded open. Insert the micro SD card so that the contacts of the slot and
the SD card are on top of each other. Close the sheet metal holder again
and to fix, push this towards the top of the device.
4. Monitor assembly
Insert the plug of the camera cable into the monitor in such a manner that
the cable points towards the SD card slot. Excess cable should be carefully
stowed in the depression on the back side of the screen. Make sure that it
cannot be crushed by the monitor holder.
1
Push the monitor parallel to the door onto the holder so that the bottom
plate with the screw hole disappears into the intended recess in the
bottom of the screen housing.
2
By pulling down the monitor slowly, this hangs into the top holder.
3
Using the screw, fix the device to the door through the hole on the
bottom of the screen housing.
Door
Installation:
1
Slide the lid upwards to open, as shown in diagram.
2
Put in the batteries according to the “+” “-” sign on the lid.
3
Take the reverse steps to close the lid.
Attention:
1. DO NOT force when opening and closing the lid to avoid lid damage.
2. DO NOT press the lid to the opposite direction when opening to avoid any
lid damage.
3. When the low battery indicator is on, please replace all batteries to avoid
any damage to this product by battery weeping.
When the batteries run out, the low battery indicator will flash to remind
users to replace the batteries. The following types of batteries can be used in
this product: AAA, 1.5V alkaline battery. Any abandoned batteries should be
disposed according to local environment protection rules and regulations.
Installation and replacement of batteries
1
3
2
Door eGuard
English |4
Operation instruction
Parts specifications
Button functions:
No basic function multi functions
1
Up · In the live view, press UP button to enter picture
browse mode;
· After enters picture browse mode, press UP button
to browse pictures backwards;
· In setting mode, press Up button to adjust the item
you selected;
2
Menu · Press Menu button to enter menu page;
· When deleting pictures, press Menu button you
can then choose to delete the current photo;
· In picture browse and setting mode, press and
hold the menu button to exit the current page.
3
Down · In picture browse mode, press Down button to
browse pictures onwards;
· In setting mode, press Down button to adjust the
item you selected;
· In the live view, press Down button to take
picture.
4
Power Button · After installing new batteries, press and hold
power button to start.
3
4
5
6
1
Time setting
2
Date setting
3
Ringtone setting
4
Volume setting 0: silent mode
3: Max volume
5
Auto power-off setting
6
Save file in
· local file (data can not be downloaded)
· micro sd-card (data can be loaded from the
sd-card via card reader)
To observe outdoors
• Under normal mode, you can observe outdoors
once you press the power button.
• When visitors press the door bell, the bell will ring inside the room.
The screen will automatically turn on showing the image of outside.
It will automatically power off once the set time is reached.
• Under normal mode, press “ ” will take a picture
of outdoors and save it automatically.
Back side of screen case
5
camera data wire connector
6
micro sd-card socket
System settings
• Under normal mode, press “ “ to enter setting mode.
• Then you should see the below setting mode page.
• Press “ “ to find different settings:
Time--Date--Ringtone--Volume--
Auto power-off time--Save file in
• Press “ “ to change the settings.
• In TIME/ DATE setting, press “ ” will increase the current number; Holding
the button down will accelerate the adjustment.
• After the setting is changed, the system will automatically save the result
and exit the setting page in a few seconds.
• If you need to exit the setting page, press and
hold “ “.
1
2
1
3
4
2
6
5
Door eGuard
English |5
Visitors
• When visitors press the door bell button on the door viewer camera,
the door bell will ring inside the room.
• Meantime, the screen will automatically turn on, showing the image of
outdoors. It will automatically power off once it reaches the set time.
• Also as the door bell is pressed, the camera will automatically take a photo
of the visitors and the photo will be stored in the set file in case the host is
out, so as to check the visitors‘ identity afterwards or
to use the information for security purposes
Replay and delete of the photos
• Under normal mode, press “ ” to replay photos.
• When you browse the photos, press “ ” or “ ” to choose photos.
1
2
3
1
Current photo number/total number
2
Month/ date
3
Shooting time
When you check the photos, press button “ ” to choose to delete the
current photo.
After a short press on the button, you will see below icon:
• Press “ ” to confirm to delete.
Caution
Alterations and modifications that are not explicitly authorised by the
responsible approval agency, can lead to a deprivation of the permission to
use the device.
Important: Legal note
Acquisition, recording and saving of video surveillance data
(sound and vision) are regulated by strict German guidelines.
Please note the valid provisions regarding data protection laws
that are stipulated in the Federal Data Protection Act resp. Land
Protection Act. For other countries the respective national data
protection laws are valid.
Disposal
Dear customer,
Please help us avoid unnecessary waste. Should you ever intend to dispose of
this device, please bear in mind that many components of the device contain
precious materials, which can be recycled.
Please be aware that electrical and electronic equipment and
batteries shall not be disposed of as household waste, but rather
collected separately. Please obtain information on the collecting
points for electrical waste from the responsible authority of you
municipality.
If you have any questions concerning the EC
Choose your auto-store file
• Users can choose to save photos in local file or TF card.
• The default store is local file.
Memory Card Installation
• There is NO micro sd-card included. This should be purchased by
user separately.
• Please insert the micro sd-card before installing batteries.
• Before inserting the micro sd-card, make sure the metal cover above
the micro sd-card socket is pushed towards the OPEN mark.
• Lift and open the upper of the metal cover and insert micro sd-card
into the metal cover.
• Then replace the metal cover and push back to LOCK mark.
• Max. 8GB micro sd-card can be used, over HDSC Class 6 is suggested.
Specifications
Door thickness 38~110mm
Camera 0.3 Mega pixels
LCD Screen 4.0" TFT
Resolution QVGA (480x 320)
Power 4 AAA,
1.5V alkaline battery
Local memory
storage
Approx 25 photos (The amount could differ depending
on the type of environment the camera is situated in)
Exterior card
type
Micro SD-card (TF), max 8GB
Photo volume
for 1
2,000pc (lab condition, the actual volume could differ
under different circumstances)
Size 139(w) x77 (H)x 15.8(D)mm
Weight 185g
Mistakes and changes reserved.
Autres manuels BURG WATCHER Système d'interphone
