Buhler 2895 Manuel du produit
WARRANTY REGISTRATION AND POLICY
Buhler Manufacturing products are warranted for a period of twelve (12) months from
original date of purchase, by original purchaser, to be free from defects in material and
workmanship under correct, normal agricultural use and proper applications.
Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or
exchange, at Buhler Manufacturing’s option, of any Buhler Manufacturing product or
part which proves to be defective as provided. Buhler Manufacturing reserves the right
to either inspect the product at the buyer’s location or have it returned to the factory for
inspection.
The above warranty does not extend to goods damaged or subject to accident, abuse or
misuse after shipment from Buhler Manufacturing’s factory, nor to goods altered or
repaired by anyone other than an authorized Buhler Manufacturing representative.
Buhler Manufacturing makes no Express Warranties other than those which are
specifically described. Any description of goods, including any references and
specifications in catalogues, circulars and other written material published is for the sole
purpose of identifying goods and shall conform to such descriptions. Any sample or
model is for illustrative purposes only and does not create an Express Warranty that the
goods conform to sample or model shown.
The purchaser is solely responsible for determining suitability of goods sold. This
warranty is expressly in lieu of all other warranties expressed or implied. Buhler
Manufacturing will in no event be liable for any incidental or consequential damages
whatsoever, nor for any sum in excess of the price received for the goods for which
liability is claimed.
WARRANTY CLAIMS:
Warranty requests must be prepared on Buhler Manufacturing Warranty Claim Forms
with all requested information properly completed. Warranty Claims must be submitted
within a thirty (30) day period from date of failure repair.
WARRANTY LABOR:
Any labor subject to warranty must be authorized by Buhler Manufacturing. The labor
rate for replacing defective parts, where applicable, will be credited at a rate determined
by the Company, Buhler Manufacturing.
IMPORTANT FACTS:
Buckets and Bucket Tines Carry No Warranty
Bent Spears Carry No Warranty
Snowblower Fan Shafts Carry No Warranty
Mower Blades Carry No Warranty
Portable Auger Parts Have Two (2) Year Warranty
Loader Parts Have Two (2) Year Warranty
PRINTED IN CANADA
bühler
Allied Front-End Loader
- 1 - P4110
2895 OPERATOR’S AND PARTS MANUAL
Table of Contents
Description Page
Registration and Policy
Loader Specifications .......................................................................................... 2
Introduction
Terminology .............................................................................................. 4
Serial Decal Location ................................................................................ 5
Safety
General Safety Notes ................................................................................ 6
Safety Decals ............................................................................................ 7
Important Precautions ............................................................................... 7
Pre – Operation .................................................................................................... 10
Operation
General Operating Notes .......................................................................... 11
Hydraulics ................................................................................................. 11
Bucket ....................................................................................................... 12
Backfilling or Scraping .............................................................................. 13
A – Frame ................................................................................................. 14
Handling Bales and Pallets ....................................................................... 15
Grapple ..................................................................................................... 17
Installing / Removing Loader
Installing .................................................................................................... 18
Removing .................................................................................................. 19
Installing / Removing Loader Attachments
Installing .................................................................................................... 21
Removing .................................................................................................. 21
Lubrication ............................................................................................................ 22
Maintenance
General Inspection .................................................................................... 23
Hydraulic Loader Lock .............................................................................. 23
Pins and Bushings .................................................................................... 23
Mounting Kit .............................................................................................. 24
Bolt Torque Chart ...................................................................................... 24
Hydraulics ................................................................................................. 25
TSL General Notes ............................................................................................... 28
Trouble Shooting ................................................................................................. 29
Parts Appendix ..................................................................................................... 31
bühler
Allied Front-End Loader
- 2 - P4110
LOADER SPECIFICATIONS
Illustration (TSL shown)
bühler
Allied Front-End Loader
- 3 - P4110
2895 2895
Item Description REG TSL
2895S
REG
2895S
TSL
AMaximum lift height to pivot pin [in/cm] 181/460 181/460 169/429 169/429
BMaximum lift height under level bucket [in/cm] 171/434 171/434 159/403 159/403
CClearance with bucket dumped [in/cm] 146/370 146/370 134/340 134/340
DReach at maximum lift height [in/cm] 29/74 29/74 20/51 20/51
EMaximum dump angle [deg] 62 61 62 61
GMaximum rollback angle [deg] 35 35 34 34
HDigging depth [in/cm] 5.0/12.7 5.0/12.7 5.0/12.7 5.0/12.7
JOverall height in carry position [in/cm] 101/255 103/262 101/255 103/262
ULift capacity to maximum height - at pivot pin [lb/kg] 7000/3175 6900/3129 6900/3129 6875/3118
optional cylinder
VLift capacity to maximum height [lb/kg] 4950/2245 4950/2245 4925/2234 4925/2234
optional cylinder
WLift capacity to 59 in. height - at pivot pin [lb/kg] 7650/3470 7650/3470 8375/3798 8400/3800
optional cylinder
XLift capacity to 59 in. height [lb/kg] 6125/2778 6125/2778 6600/2993 6600/2993
optional cylinder
YBreakout force - at pivot pin [lbf/daN] 8475/3770 8500/3781 9950/4426 9950/4426
optional cylinder
ZBreakout force [lbf/daN] 6550/2914 6550/2914 7450/3314 7475/3325
optional cylinder
VV Bucket rollback force at maximum height [lbf/daN] 6250/2780 6375/2836 6300/2802 6400/2847
optional cylinder
XX Bucket rollback force at 59 in. lift height [lbf/daN] 8000/3559 7850/3492 8000/3559 7875/3503
optional cylinder
ZZ Bucket rollback force at ground line [lbf/daN] 7400/3292 7025/3125 7400/3292 7000/3114
optional cylinder
Raising/Lowering time [sec] 8.1/5.5 8.1/5.5 8.1/5.5 8.1/5.5
optional cylinder
Bucket dumping/rollback time [sec] 4.0/2.6 4.0/2.6 4.0/2.6 4.0/2.6
optional cylinder
Lift cylinder tube/shaft size [in] 3.5/2.0 3.5/2.0 3.5/2.0 3.5/2.0
optional cylinder
Lift cylinder stroke/retracted length [in] 32.50/52.50 32.50/52.50 32.50/62.50 32.50/62.50
Bucket cylinder tube/shaft size [in] 3.00/1.75 3.00/1.75 3.00/1.75 3.00/1.75
optional cylinder
Bucket cylinder stroke/retracted length [in] 27.50/38.75 24.50/52.25 27.50/38.75 24.50/52.25
Mounting Height (+/- 3.0) [in] 55
Hydraulic pressure rating/flow rate [psi]/[gpm] 2500/20
Tractor size [H.P. @ normal duty] 130-275
Bucket size [in/cu.ft.] 72/27.0
- * Indicates bucket size used for calculations 84/30.5*
of lift capacities and rollback forces. 96/37.3
Weight (with bkt & mtg kit) [lb/kg] 3800/1270
NOTE: Specifications are subject to change without notice or obligation.
bühler
Allied Front-End Loader
INTRODUCTION
This manual has been provided as information regarding the specifications, safe
operation and maintenance of your agricultural front-end loader. Read and understand
this manual and the tractor manual prior to operating to obtain the best use of operating
your loader. Keep this manual for reference and to forward to new operators and
owners. Contact your local Buhler - Allied dealer if you require any assistance,
information or additional manuals.
Terminology: Basic terminology used throughout this manual has been identified
below. For part numbers and further details refer to the Parts Appendix.
Attachment
lock pin
Loader bottom
arm
Loader top arm
Attachment
(bucket shown)
Torsion tubes
Loader joint plate
Bucket cylinder
Level rod indicator
Mount plate
(part of mtg. kit)
(Side plate part of
mounting kit)
Loader upright
Lift cylinder
Loader
lock pin
Loader Identification Illustration (2895 shown)
- 4 - P4110
bühler
Allied Front-End Loader
Some components are identified as “right” and “left”. This is determined as seated in
the tractor and facing forward, loader end.
Serial Decal Location: The serial decal is located on the inside left arm of the loader
joint plate. Please record the serial number in the space provided for future reference.
The serial decal will provide the model and date of manufacture of the loader and will be
required to obtain correct replacement parts and complete warranty claims.
For your records, record
Serial Number here: _____________________________
Buhler Manufacturing
"a partnership"
farm king
allied
inland
Warranty Registration: The Warranty Registration and Delivery Report MUST be
completed within thirty (30) days of delivery to validate the warranty.
- 5 - P4110
bühler
Allied Front-End Loader
SAFETY
Read and understand all the safety messages listed in this manual. For your safety and
the safety of others near the machine, learn how to control and operate the loader
properly. It is your responsibility to inform subsequent operators and owners of these
precautions.
General Safety Notes:
9Improper use of the loader and tractor can cause serious injury or death.
9Operate the loader while seated in the tractor seat only.
9Keep the work area clear of other persons.
9Never leave the tractor unattended while the attachment is raised. Always lower the
attachment to ground and shut tractor off before leaving the tractor seat.
9Never work beneath a raised loader unless it is securely supported. The control
lever can be moved or a hydraulic leak could cause the loader to drop resulting in
serious injury or death. Refer to the Lift Lock Instructions Decal for proper use of the
lift locks.
9Prior to use, check to ensure the attachment is properly locked to the quick-tach.
Verify from tractor seat by lowering the attachment to the ground and retracting the
lift cylinders.
9Never operate loader with frayed or damaged hoses or leaking fittings. A burst
could cause the loader to drop suddenly and result in serious injury or death and
cause damage to the loader or tractor.
9Keep tractor on solid ground when raising loader. Loose fill rocks and holes can be
dangerous for loader operation and movement.
9If for some reason, you feel the tractor tipping, immediately lower the loader.
9A pivoting front axle acts like a three-wheeled tractor until the stops hit the axle.
9Space rear tires as recommended by the tractor manufacturer. Maximize width for
high lift applications and uneven terrain.
9Add rear ballast as required to ensure 25% of gross vehicle weight is transferred to
the rear axle. Loader, attachment and payload must be included as weight.
9Do not raise attachment to extreme heights while tractor is on an incline. Be alert for
terrain changes and adjust accordingly. Keep attachment at low travel height, no
more than one foot, as long as possible.
9Allow for attachment and loader length when turning.
9The tractor must be equipped with an approved Roll Over Protection Structure
(ROPS) and safety belts.
9Use proper lighting and safety warnings when transporting equipment on public
roads and during darkness. The Slow Moving Vehicle (SMV) emblem must be
visible. Check with your local Law Enforcement Agency for specific requirements.
- 6 - P4110
bühler
Allied Front-End Loader
Safety Decals: Safety Decal Location illustrates the approximate location and detail of
safety decals. To install safety decals ensure the installation area is clean and dry.
Decide on the exact position before you remove the backing paper. Remove the
smallest portion of the split backing paper and align over the specified area. Carefully
press in place. Slowly peel back the remaining paper and smooth the remaining portion
in place. Small air pockets can be pierced with a pin and smoothed out. Keep all
decals clean and replace any that are damaged or missing. Replacement decals are
available from your local dealer.
Important Precautions: The alert symbol is used throughout this manual. It indicates
attention is required and identifies hazards; your safety is involved. Follow the
recommended precautions.
- 7 - P4110
The safety alert symbol indicates ATTENTION ! BECOME ALERT ! YOUR SAFETY IS
INVOLVED ! The symbol appears in conjunction with statements and signs.
CAUTION
WARNING
The danger symbol indicates an imminently hazardous situation, which will result in
death or serious injury. This signal word is limited to the most extreme situations,
typically for machine components, which, for functional purposes, cannot be guarded.
DANGER
The caution symbol indicates a potentially hazardous situation, which may result in
injury. It may also be used to alert against unsafe practices.
The warning symbol indicates a potentially hazardous situation, which could result in
death or serious injury and includes hazards that are exposed when guards are
removed. It may also be used to alert against unsafe practices.
bühler
Allied Front-End Loader
Safety Decal Location
- 8 - P4110
Table des matières
Autres manuels Buhler Chargeur frontal
