Buffalo User Manuel utilisateur
User Manual
AirStation
Draft-N Wireless USB Adapter
WLI-U2-G54HG
v1.1
2
•Insert the AirNavigator CD
into the CD-ROM drive of your
computer. The AirNavigator
Setup Wizard should launch
automatically.
•To launch the AirNavigator
Setup Wizard manually, click
Start, then Run. Type “D:\
Setup.exe”, where D is the drive
letter assigned to your CDrom.
•Click OK to launch the wizard.
Getting Started
3
•Select Install Wireless
Drivers.
Installing Drivers
4
• Click Next to install a driver for the USB adapter.
• Select Agree and click Next to continue the process after reviewing the license
agreement.
• A window will appear prompting the insertion of the Wireless Adapter. Plug the
included cable into the AirStation Wireless USB Adapter and your PC’s USB port.
Installing Drivers
5
• When the ‘Found New Hardware Wizard’ launches, click Next to run the wizard.
•If the ‘Digital Signature Not Found’ page opens, click Yes.
• When the Wireless USB Adapter is successfully installed, click Finish. Restart your
computer if prompted.
Installing Wireless Drivers
6
Connecting Wireless Clients to your Network
Buffalo supports three different
methods for connecting your wireless
client device to your network.
If your AP supports AOSS, use it
to connect simply and securely.
Install the Client Manager from your
AirNavigator CD (page 7) and turn to
page 10.
You may also use the Client Manager
software from your AirNavigator CD to
configure your network manually. See
page 15 for more on Client Manager.
If you’re running Windows XP on your
PC, you may use its built-in Zero
Configuration tool to connect to your
router/AP. See page 20 for more on
Zero Configuration.
7
Client Manager can be used to survey and connect to available access points, congure
WPA/WEP encryption, and create connection proles.
Note: When Client Manager is installed, Windows XP Wireless Zero Conguration is
automatically disabled.
Installing Client Manager
Insert the AirNavigator CD into the CD-
ROM drive of you computer. If the Air
Navigator Setup Wizard does not launch
automatically, launch it manually by
clicking Start and then Run. Enter D:\
Setup.exe in the dialog box that appears.
Click OK.
Select Install Wireless Client Manager.
Client Manager
8
Client Manager
•Press Agree to accept the license agreement.
•Press Next to begin the installation.
9
Client Manager
•Click OK when Client Manager
installation is complete.
•Press Exit Setup to exit AirNavigator.
•Client Manager is now installed and
running. Right-click on its icon (the
black antenna) to use it.
10
The AOSS button for this wireless client is in its Client Manager software. Start
Client Manager by right clicking on the black antenna icon in your System Tray,
or by launching the Client Manager from your Start Menu: Programs >> Buffalo
>>AirStation Utility >> Client Manager. The AOSS button is under the Proles
tab.
AOSS (AirStation One-Touch Secure
System) is a simple, one-touch setup
for connecting wireless clients to an
access point while enforcing the most
secure possible connection encryption
type. Users no longer need to worry
about choosing the proper security
protocols, IP addresses, or SSID. AOSS
determines the optimal connection and
congures itself in seconds. If your
router doesn’t support AOSS, turn to
page 6 to congure your connection
manually with Client Manager or
Wireless Zero Cong.
Using AOSS
Table des matières
Autres manuels Buffalo Carte réseau
Manuels Carte réseau populaires d'autres marques
3Com
3Com EtherLink 3C509B Manuel utilisateur
TRENDnet
TRENDnet TEG-PCITX Manuel utilisateur
Cisco
Cisco MC16E Manuel utilisateur
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manuel utilisateur
TwinMOS
TwinMOS Booming Manuel utilisateur
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur
National Instruments
National Instruments NI 9234 Manuel utilisateur
Hama
Hama 49276 Manuel utilisateur
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation
Compaq
Compaq Wireless LAN 100 Manuel utilisateur
Bose
Bose PowerMatch Dante Manuel utilisateur
TRENDnet
TRENDnet TEG-PCITXR Manuel utilisateur