5
3
D
B12
C
G
FIG 2 FIG 3 FIG 4
HTRACKC Horizontal Truck Rack4
In order to properly assemble the rack you need to determine if the rack will be
installed on a LONG BED or SHORT BED truck.
WARNING: DO NOT tighten any bolts during the following steps.
Step 1
Slide one of the Rear Upstands (5) into the Rear Side Kit (3) as shown in Fig 2. Then connect them
using bolts, flat washers, and nuts provided.(B)
Step 2
Install the Rear Bar (12) over the end of the Side Kit as shown in Fig 3. Using bolt, (C) to attach the
Rear Bar to the Side Kit. Fig 4.
Step 3
Install 2 piece bolts (G) through the Rear Upstand (5) and the Rear Bar (12). Attach using flat and
spring washers, nuts as shown in Fig 4. Repeat the above steps to the opposite side.
Do not tighten any bolts.
WARNING: Truck bed size determines rack assembly. Follow instructions below.
Step 4
(For Short Bed Truck)
Slide the Front Bar (10) onto the Front Side Kit (2) first, then slide the Front Upstand (4) into Front
Side Kit backward as shown in Fig 6.
(For Long Bed Truck)
Slide the Front Bar (10) onto the Front Side Kit (2) first, then slide the Front Upstand into Front Side
Kit forward as shown in Fig 7 and Fig 8. Bolt the Front Upstand (4) using 2 piece bolt, flat washer,
and nut (B). Then connect the Front Upstand to the Front Bar (10) by 2 piece bolts (G), flat and
spring washers, nuts (G). Repeat to the opposite side.
Do not tight any bolts.
