bto plus deck2c Manuel d'instructions
BTO Co., Ltd. www.plusdeck.com
ManualforUseandInstallation(awarrantycard enclosed)
Copyright © 2000–2005 BTO Co., Ltd.
Thank you for using Plusdeck2c
This manual includes the installation process, Plusdeck2c operation,
and troubleshooting. In the back of the manual included is the
registration card.
User manual (a warranty card enclosed) Version. 3.50
■The contents of this manual can be changed without prior notice due to any
change in the product.
■Printed images may differ from the actual images.
■Copying or distribution of the contents of this material without our written
permission is forbidden.
Before Installation
1. About Plusdeck2c ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 4
2. Product Information and Requirements ⋯⋯⋯⋯ 5
3. Plusdeck2c components ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 5
4. Plusdeck2c specification and electromagnetic
wave regulation⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 6
5. Suggestions when installing and using
Plusdeck2c ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 7
6. Electromagnetic Waves Validation ⋯⋯⋯⋯⋯⋯ 7
7. Suggestions about Installation And Use ⋯⋯⋯⋯ 8
Note: Throughout this manual, the names PC and
computer are used interchangeably.
플러스데크2c사용
1.Before installation ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 3
2.Installing Plusdeck2c ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 9
3.Connecting Plusdeck2c⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 15
4.Getting Started ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 21
5.Using Plusdeck2c ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 33
6.Getting more out of Plusdeck2c ⋯⋯⋯⋯⋯⋯ 47
7.Warranty and Registration Card⋯⋯⋯⋯⋯⋯ 63
Contents
Part 1
Before Installation
54
•It uses normal type cassette tapes.
•It is a cassette deck for PC.
•It has software controlled full logic mechanism.
•It is assembled with a high quality Japanese deck and audio mechanism to deliver
CD quality sound.
•It has auto-reverse function.
■The followings are possible with the Plusdeck2c.
•Play the tape: Listen to the cassette tape on your PC.
•Convert the tape: Sounds in cassette tapes can be converted to the digital
files on PC as wav or mp3 format.
•Save Streaming audio into files on PC
www.plusdeck.com
●
About Plusdeck2c
1
Patent issue 0390012/International patent PCT/KR01/1567
Registration of design 30-2001-0034551
Registration of program 2001-01-23-4046
Best prize of the second Digital Innovation/Success Design of KIDP (Korea Institute
of Design Promotion, 2002)/Procurement Success Designed Special Product chosen
by Supply Administration/Best New Product chosen by Hankook Ilbo/Hit Product
chosen by Electronic Newspaper/Hit Product chosen by Computer Times/Emerging
SuccessTechnique Award chosen by the Seoul Economy, etc..
•5.25” bay 1EA
•Expansion slot 1EA
•Soundcard(analog Line In)
•Minimum 10M of hard drive space for the software installation
•Windows 95/98/ME/2000/XP(Windows is the trademark of Microsoft)
Product Information
2
Requirements for Plusdeck2c installation
3
Part 1
Before Installation
6
www.plusdeck.com
●7
Check all following components are in the box. If you find any component missing or
damaged, contact the distributor or manufacturer.
1. Plusdeck2c main body 2. 20 pin cable
3. Connection card 4. Serial cable(RS232C cable)
5. Stereo cable 3 EA 6. Installation CD
7. User manual 8. Fixing screws
■A crossed screwdriver is needed to install the Plusdeck2c.
■If you move it to a different computer, all other components should follow it.
Plusdeck2c components
4
❶Plusdeck2c main body
❸Connection card
❺Stereo Cable 3 EA
❼User manual ❽Fixing screws
❻Software CD
❹Serial cable (RS232C cable)
❷20 pin cable
green
blue
pink
Plusdeck2c Specification
5
Electromagnetic Wave Compliances
6
E-H900-01-5845(B)
•Size (W×H×D): 145×40×215mm
•Tape speed: 4.75Cm/sec
•Wow & Flutter: 0.09%(WRMS)
•Frequency response: 20 ~ 18,000Hz
•Separation: 40dB
•Signal to Noise Ratio : 55dB
•Power: DC12V
FCC Information
This is device complies with Part 15 of the FCC Results.
Operation is subject to the Following two conditions:
(1) This Device may not cause harmful interface, and
(2)This Device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for CLASS B digital device,
pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radiocommunications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try correct the interference by
one or more of the following measures:
1.1.Reorient or relocate the receiving antenna.
1.2.Increase the separation between the equipment
and receiver.
1.3.Connect the equipment into an outlet on a circuit
different from that to which receiver is connected.
1.4.Consult the dealer or experienced radio/TV
technician for help.
WARNING
Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate
the equipment.
FCC ID : R4EPlusdeck2c-1
Installing Plusdeck2c
1 Make room for the installation ⋯⋯⋯⋯⋯⋯⋯⋯10
2 Inserting Plusdeck2c ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯11
3 Connecting 20 pin cable⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯11
4 Connecting power cable ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯12
5 Fixing connection card and Plusdeck2c ⋯⋯⋯⋯13
6 Closing PC case ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯14
Part 1
Before Installation
8
•Make sure that the power is off during the installation.
•A caution should be given with the sharp edges inside the PC
•Do not leave other materials or do not touch other parts inside the PC.
•Avoid a direct exposure to the sun or moisture when installing.
•Mechanical or chemical damage should be avoided.
•Keep screws or other small components out of children’s reach.
•Do not use bent or damaged tapes.
•Do not move the product while in operation.
•A great care must be given when using important tapes.
•Avoid inserting the finger or materials other than tapes.
•Do not disassemble, modify, fix the product by an unauthorized personnel.
www.plusdeck.com
●
Suggestions when installing and using Plusdeck2c.
7
11
1.Fully insert the Plusdeck2c into an empty 5.25”bay.
2.Make sure that the back of the Plusdeck2c does not touch other PC components.
3.For some PC models, you may need a side bracket to hold the Plusdeck2c.
(A side bracket is sold separately.)
1.Connect one end of the 20 pin cable to the Plusdeck2c and the other end to the
connection card. Connecting 20 pin cable may well be done after step 5.
2.The 20 pin cable is connected between the Plusdeck2c and ocnnection card.
Notice that there is a notch in the middle of the connector which prevents you
from connecting the cable upside down.
Inserting Plusdeck2c
2
Connecting 20 pin cable
3
Part 2
Installing Plusdeck2c
10
www.plusdeck.com
●
Make room for installation
1
1.Open the PC case.
2.Caution should be given with sharp edges inside PC.
3.Locate an empty 5.25 inch bay where Plusdeck2c is installed.
Note •How to open the case differs from manufacturer to manufacturer.
•If you are having a difficulty, read the user’s guide or contact the PC
manufacturer.
•Turn the power of PC off before installing.
•It can cause an electrical shock if it is installed with the power switch
on.
Caution
13
1.Fix the connection card at an empty slot of PC with a screw.
2. It can be installed in any empty slot as it does not connect to a PCI bus or
controller.
3. Fix the Plusdeck2c main body with screws as shown in the picture on the left.
4. In order to reduce noise or other related problems, fix all PC components firmly.
5. It is recommended that you use the screws that come with the product to fix the
product well.
Fixing Connection Card and Plusdeck2c
5
Part 2
Installing Plusdeck2c
12
www.plusdeck.com
●
1. The internal power cable is shown in the picture on the left.
2. A 4 pin power cable supplies 5V and 12V.
3. Before connecting the power cable, check the power cable direction as shown in
the picture.
4. The rounded edge of the power cable must face downward when inserted.
5. An extra caution should be used as the power cable connection of the Plusdeck2c
can be different from that of CD or DVD drive.
6. If the power cable is connected wrong, it could damage the the unit.
7.If there is no available power cable, a Y adapter power cable can be used for
extension.
Connecting Power Cable
4
four lines of power cable
(yellow, black, black, red)
power cable of
computer(inside computer)
Connecting Plusdeck2c
1. About the connection card ⋯⋯⋯⋯⋯⋯⋯⋯⋯ 16
2. Connect serial cable ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 17
3. Connect to the sound card ⋯⋯⋯⋯⋯⋯⋯⋯⋯ 18
1. Standard connection
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
18
2. Advanced connection
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
19
3. Microphone connection
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
20
Part 2
Installing Plusdeck2c
14
1.A completed cable connection inside PC is shown in the figure on the left side.
2.Close the PC case to finish the installation.
www.plusdeck.com
●
Closing PC case
6
17
1. Connect the serial cable between the serial ports of the connection card
and PC.
2. “Hardware Connect error”message appears if the serial cable is not
properly connected and the software will not work.
3. The PC serial port is usually located near the printer port below the mouse
and key board port.
4. The 15 pin port in the sound card is a MIDI port not a serial port.
5. The serial cable included in the product uses 1:1 direct communication.
The crossly connected serial cable will not work with the Plusdeck2c.
6. In case the serial port in the PC is out of order or not available, install a PCI
RS232 expansion card to make a serial port.
7. The USB/serial connector will not work as it does not allow two way
communication.
Part 3
Connecting Plusdeck2c
16
1. The connection card can be installed in any slot of the PC as it does not
connect to a PCI interface. It lets the Plusdeck2c communicate with the
PC(serial port and sound card).
2. Its main components as shown on the left side consist of
A. 20 pin cable connector
B. audio input/ouput ports
C. serial port
D. Jumper (default value – open)
3. The jumper D is the switch to ground the Plusdeck2c circuitry. The default
value is open position. Changing it to short position could improve the
sound quality.
4. The tape sound from the Plusdeck2c flows out of the blue jack of the
connection card and flows into the PC.
www.plusdeck.com
●
About Connection card
1
Connecting Serial Cable
2
B
AD
C
The same port can be found
in the back of the PC.
Table des matières
