BTM SuperChek Plus Manuel utilisateur

5228BT-M01A1 Rev.date:11/2013

USER GUIDE

Model: 5228B

Explanation of symbols:Caution (refer to accompanying documents). Please refer to safety-related notes in the manual accompanying this instrument.Consult instructions for use.Keep away from sunlight.Authorised representive in the european community.ManufacturerDo not re-useUse-by dateBatch codeIn vitro diagnostic medical device. Temperature limit

1. ContentsSection Topic Page1. Contents 2. Introduction 3. Appearance and Key Functions of the meter 4. Alternate Site Testing 5. Safety Information 6. Quick Testing InstructionsPreparing for Testing 7. Installing the Battery 8. Settings (Date/Time/Alarm/Measuring Unit/ Memory Deletion )9. Running a Control Solution TestBlood Testing10. Running a Blood Glucose Test11. Recalling the Memory and Viewing the Average12. Expected Values13. Transmitting Results Maintenance 14. Maintenance of Your System

15. Troubleshooting 16. Customer Service

17. Limitations

Important Additional Information 18. Specifications 19. Ordering Supplies 20. Warranty Information 1 1 2-3 4 5-8910 11 12-1617-1819-2122-2324242526-272829303131NOTE: For information about the name of the manufacturer of the lancing device and the lancets, please refer to the package inserts that came with your starter kits.

22. Introduction to the SystemIntended Use / Indications for UseThe SuperCheck Plus Blood Glucose Monitoring System is intended for use in the quantitative measurement of glucose in fresh capillary whole blood from the finger and the forearm and venous whole blood. It is intended for self-testing by people with diabetes mellitus at home and healthcare professionals as an aid in monitoring the effectiveness of a diabetes control program. The SuperCheck Plus Blood Glucose Monitoring System is not intended for the diagnosis of or screening for diabetes mellitus, nor for use with neonates. The alternative site testing (forearm) in this system can only be used during steady-state blood glucose conditions.Contents of the SystemThis User Guide has been prepared to describe the proper use of the SuperCheck Plus Blood Glucose Monitoring System. Please read this User Guide and the package insert that comes with the SuperCheck Plus Glucose Test Strips before testing.The system is available either as a meter alone or as a kit. If you have a meter only, you can purchase the system supplies from your system provider.

The starter kit of SuperCheck Plus Blood Glucose Monitoring System includes the following items: 1. SuperCheck Plus Glucose Meter with 2 AAA batteries2.U ser Guide3.L og Book4.C arrying Case5. SuperCheck Plus Glucose Test Strips6. SuperCheck Plus Control Solution (Medium) 7.S terile Lancets 8.L ancing Device9.P ackage Inserts for Test Strips, Control Solution, and Lancets/Lancing Device"A single level control solution (Medium) is provided in the "Starter Kit," and no control solution is included in the "Meter Kit". You may purchase any control solutions that you need from your system provider."The SuperCheck Plus Glucose Meter uses SuperCheck Plus Glucose Test Strips. Neither the meter nor the test strips will work when used with any other brand of glucose products.3

4 3. Appearance and Key functions of the meter

The principle of the methodWhen glucose reacts with the reagents on the test strips, an electrical current is produced, which is proportional to the glucose concentration in the blood sample.The glucose concentration is calculated by the meter and based on the current measured.

1.Test strip slot - When the strip is inserted into the slot, the meter will automatically turn on.2. LCD Display - Guide you through the test using symbols and simple messages.3. M Key - Power ON/OFF, also for memory recalling mode, please refer to manual for detailed function description.4. C Key - Setting mode, please refer to manual for detailed function description.5. RS232 port - Cable connection and data transmitting. The built-in Bluetooth also supports the data transmitting.6. Battery Compartment - Where batteries are located.7. Ejector - Remove used strip.

*If your meter has the backlight feature, it will be on in every operation to increase the readability in operation, hence help the user to operate the meter more smoothly.

54. Alternate Site Testing (AST)What is AST?AST is the sampling from anatomical sites (parts of the body) other than the fingertip (i.e. forearm) to check the blood glucose levels. This system allows you to test on the forearm with the equivalent results to fingertip testing.There are important limitations to AST. Please consult your healthcare professional before you use AST.What is the advantage ?It is more painful feeling when taking blood sample from fingertips because fingertips have many nerve endings. Other body sites do not have as many nerve endings, so you will not feel as much pain as at the fingertip.When to use AST ?Medication, stress, illness, food and exercise can affect blood glucose levels. Capillary whole blood at the fingertip can reflect test changes faster than capillary blood at other sites of body. If you test your blood glucose level during or immediately after a meal, physical exercise or stressful events, take the blood sample from your fingertip instead of from other sites.Use AST only:1. 2 hours or more after taking insulin;2. 2 hours or more after a meal;3. 2 hours or more after exercise.Do not use AST if you are pregnant, or if you are aware that your glucose level is not as stable as usual, or if you think you have hypoglycemia (low blood sugar) or hyperglycemia (high blood sugar).Do not use AST if you think your blood glucose is low and if your AST results do not match the way you feel.

6 Testing Procedure for AST1.Please unscrew the lancing device by turning the end cap counter clockwise. A clear cap will come with the package of a meter kit or a lancing device. The clear cap on the lancing device will make it easy for you to get a drop of blood forAST.2.Insert a new lancet firmly into the lancet holder.3.Twist off the protective top of the lancet.4.Close the end cap of the lancing device and grasp the lancing device as shown. Slide into locking position. If necessary, please set the lancing device for a deeper puncture. 5.Select a soft, fleshy area on your forearm that is clean and dry, awayfrom bone and free of visible veinsand hair. 12345

6.Massage the selected area gentlyto increase blood flow to the puncture site. Clean the test locationwith an alcohol wipe or with soapand water. 7.O pen the test strip vial. Take one new test strip out of the vial and quickly recap the vial to keep air out.8.Insert the test strip into the meter while the meter is off. The meter will turn on automatically. A blinking blood icon will be displayed on the screen. If no action is taken in 2 minutes, the meter will turn off automatically.9.Press and hold the loaded lancing device against the forearm for a few seconds, then press and release the button.6789

8 10111210. Wait for a few seconds until the blood drop forms. Make sure you have sufficient blood to fill the small window of the test strip. Forindividuals who experience difficulty in getting sufficient blood for a test, it may be helpful to rub the puncture site a little longer before using the lancing device.11. Apply your blood to the front edge (the tip) of the test strip, and the meter will start counting down for 5 seconds then display the test results on the screen. 12. Remove the used strip by hand or by pushing the ejector button. The meter will turn off automatically.