Bticino HC4608 Manuel utilisateur

MY HOME 1

Technical sheets – Burglar alarm

4 5 6

1 2 3

7 8 9 C OK

0 P

HC/HD/HS/L/N/NT4608

BT00025-b-UK

Description

Using the transponder key, or a secret code set on the central unit, this device with

display and digital keypad can be used to arm/disarm the system and separate the zones

with the same exibility and using the same procedure as for burglar-alarm central unit

with display, or three module ush mounted central units.

In this way the central units can be installed in an appropriate equipment room, out of

sight.

All system status details are shown of the large backlit display.

Legend

1 - Graphic display: displays the messages which guide the programming operations

and the events which have occurred.

2 - Transponder reader: receives the burglar-alarm system switching on and o

commands directly from the transponder keys.

3 - Alphanumeric keypad: allows the manual switching on of all those programming

operations which require the use of numbers and/or symbols.

4 - C key: exit the current menu and the programming.

5 - OK key: to conrm the programming operations.

6 - Navigation keypad: navigate the menu.

Technical data

- Power supply from SCS BUS: 27 Vdc

- Max. absorption: 28 mA

- Operating temperature: 5 – 40°C

Dimensional data

Size: 3+3 modules

Front view

Display keypad

2MY HOME Technical sheets – Burglar alarm

BT00025-b-UK

HC/HD/HS/L/N/NT4608

Conguration

The activator with display must be congured by assigning a zone address (Z), indicating

the activator group it belongs to, and a progressive number (N) within the group.

To congure it as belonging to the activators group, no value must be entered in Z.

The conguration is performed using a specic menu shown on the display, following

the procedure below:

1. Ensure that the system is in“maintenance”mode.

2. Upon switching on the activator, the“SETTING”screen appears in Italian language.

3. Select “Address”(address).

4. Enter the Z and N address to assign to the activato and press OK to conrm.

5. Enter the other settings or return to the main page, and start the learning procedure

on the central unit.

Selecting the central unit installed in the system

1. Select “type of central unit”.

2. Select the type of burglar-alarm central unit installed:

-“Display”for central unit item 3486, item 3485/B and item HC/HD/HS/L/N/NT4601 -

“No display”for central unit item L/N/NT4600/4 and AM5780/4.

3. Press OK to conrm.

4. Enter the other settings or return to the main page, and start the learning procedure

on the central unit.

For further device customisation procedures refer to the information on the CD supplied

with the product.

Address conguration menu

SETTINGS

Language

Address

Central unit type

Address--

SETTINGS

Language

Address

Central unit type

Address 12

SETTINGS

Language

Address

Central unit type

Address12

WARNING

Modified address

run system

learning

Address conguration menu

SETTINGS

Language

Address

Central unit type

Display

SETTINGS

Language

Address

Central unit type

No display

SETTINGS

Language

Address

Central unit type

No display

in progress...

Autres manuels pour HC4608

Ce manuel convient aux modèles suivants

Autres manuels Bticino Système de sécurité

Bticino

Bticino 3489GSM Manuel utilisateur

Bticino

Bticino HC4601 Manuel utilisateur

Bticino

Bticino 367221 Manuel utilisateur

Bticino

Bticino HC4608 Manuel utilisateur

Bticino

Bticino Polyx Alarm 3485B Manuel utilisateur

Bticino

Bticino 391861 Manuel utilisateur

Bticino

Bticino 393014G Manuel utilisateur

Bticino

Bticino 348220 Manuel utilisateur

Bticino

Bticino 349416 Manuel utilisateur

Bticino

Bticino MYHOME SCREEN3,5 Manuel utilisateur

Bticino

Bticino 3500 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur