BT RESPONSE 115 Manuel utilisateur

Response 115 telephone

and answering machine

User guide

Please open this page for a further ‘at a glance’

guide to your Response 115.

✱

SECRECY REDIAL

STORE QUICKDIAL

PLAY

Response 115

Telephone & Answering Machine

MIC

ANSWER

ON/OFF

REW

At a glance

Microphone

For recording outgoing

messages and memos.

Answer On/Off button

Switches the answering

machine on and off.

See page 8

Handset catch

Supports handset

when wall mounted.

See page 7

Redial/Pause button

Redials the last

number called. Inserts

a pause.

See page 13

Secrecy button

Allows you to talk to

someone in the same

room without the

person on the other

end of the line hearing

your conversation.

See page 14

Store button

Allows you to store up

to 10 numbers in the

memory.

See page 13

Quickdial button

Enables you to dial

phone numbers stored

in the memory.

See page 13

R button

Recall button for use

with switchboards and

BT Select Services.

See page 14

Handset park

For wall-mounted

phone.

Main cover

Lift to access

further control buttons

and the MC30

microcassette.

Message display

counter

Indicates when the

answering machine is

switched On/Off and

displays the number of

messages recorded on

the answering machine.

See page 10

Rewind/Play button

Press to play back

messages and memos.

Rewinds the tape

during playback.

See page 11

SAVE

An incoming message

cannot be recorded

unless this cassette safety

cover is replaced and

clicked shut.

To record an outgoing

message. Press and hold

the OGM button. Speak

after the tone. Press stop

to end the recording.

STOP

IMPORTANT

OPEN TO

ACCESS CASSETTE

SECURITY CODE:

– +

OGM MEMO

TIME

MC30 cassette

15 minutes per side,

fits under the cassette

safety cover.

OGM button

Allows you to

record and check

your outgoing

message and to

programme the

time and day.

See page 9

Time button

Plays the existing time

and day and allows you

to enter the time and

day programming

function using the

OGM button.

See page 8

Directory label

Allows you to note down

the numbers stored in the

memory.

See page 13

MEM

................

...............

................

.................

Microcassette lid

Lift to access the

microcassette.

Volume buttons

Adjusts the volume

during message

playback and when

recording memos or

your outgoing

message.

See page 9

Save/Stop button

Stops certain functions

and saves messages

after playback.

See page 10

Memo/ Fast Forward

button

Press to record a

memo message. Fast

forwards the tape

during message

playback.

See page 10

At a glance 1

Introduction 4

Setting up 5

Using your Response 115 8

answering machine

Using your Response 115 13

telephone

Additional features 15

Help 18

Maintenance 20

Technical information 22

Index 23

Hints and tips boxes

In this user guide, we’ve included helpful tips and

useful notes. They are shown in a grey box.

In this guide

For your records

Date of purchase:

Place of purchase:

Serial number:

(on the underside of the unit)

Purchase price:

For warranty purposes proof of purchase is

required, so please keep your receipt safe.

Check that your Response 115 is complete.

When you unpack you should have:

•Response 115 with telephone line cord

attached.

•Mains power adaptor.

•30 minute MC30 cassette (already fitted) (15

minutes per side).

•2 screws and 2 Rawlplugs for wall mounting.

•Spare memory label.

We thank you for making the right choice and

expect that your Response 115 will give you

many years of quality service.

Please read the instructions carefully before

use and keep this user guide for future

reference.

Introduction Your Response 115 is designed for ease

of use and made to the high standards set by BT

1 Plug your Response 115 into

the phone socket

If you do not have a modern phone socket,

call Freefone 0800 800 150 and ask for a BT

engineer to come and fit the correct socket.

This is a chargeable service.

Warning

1Do not try to use any power adaptor

except the one provided (item code

871036). If you do you may permanently

damage your Response 115 and this will

invalidate the warranty.

2There is a slight chance that your

Response 115 could be damaged by an

electrical storm. We recommend that

you unplug the unit from the mains

during storms.

Setting up Follow these steps to get your Response 115

ready for use

Plan where you will put your Response 115.

It should be within two metres of a power socket

and the phone socket.

2 Plug the power cord into the

back of the base unit

To prevent the power cord being pulled out

accidentally, route it behind the clip on the

back of the base unit.

3 Now plug the adaptor into a

convenient mains power socket

When the power is switched on you hear

a single beep, the MC30 cassette operates

briefly.

An incoming message cannot be recorded unless the

cassette safety cover is clicked shut.

4 Set the dial mode

The dial mode switch is located on the back of

the base unit.

Your Response 115 is pre-set to TONE (TB)

dialling. This ensures the phone will work with

all modern digital exchanges.

If you dial a number and continue to hear the

dialling tone, you may need to switch the

phone to PULSE (P) dialling.

5 Set the ringer volume

The ringer switch is located on the back of the

base unit. There are three settings.

•HI– a loud ring.

Your Response 115 is pre-set to this position.

•LO– a quiet ring.

•OFF– no ring.

OFF LO HI

P TB

Setting up

6 Wall mounting (optional)

Before you start, make sure that the telephone

is in easy reach of the power supply and a

telephone socket, and that the wall can support

the weight of your Response 115.

Drill two holes for the screws and insert the

wall plugs provided (if you need them).

Insert the screws leaving about 2-3 mm

sticking out to hang the Response 115 from.

A template is printed at the back of this guide (page

25) which you can use to mark where you will put

the screws into the wall.

Attach the Response 115 by hooking it over the

screws protruding from the wall.

Wall

Wall plug Screw

Pull out and turn the handset catch around to

prevent the handset from falling off the base

when in the upright position.

Handset park

When wall mounted, if you need to temporarily

move away from the phone during a conversation,

you can hook the handset on the handset park on

the top of your Response 115.

SECRECY REDIAL

Setting up

Switching the answering machine

off and on

To switch off

•Press the ANSWER ON/OFF button. You will

hear a long beep. The MESSAGE DISPLAY

COUNTER goes out. Any messages recorded

will be saved.

To switch on

•Press the ANSWER ON/OFF button. You will

hear a long beep. The tape motor operates

briefly and the display will show or the

number of messages saved. 0

Time and day setting

Your Response 115 will add the time and day to

the end of each message recorded.

To set the time and day

•Press and hold down the TIME button until

the day and time is announced (eg Sunday

12.03am).

•Release the TIME button and immediately

press and hold the OGM button until the

correct hour is announced.

•Press and release the TIME button and the

current minute is announced (eg .03).

•Press and hold down the OGM button until

the correct minute is announced.

•Press and release the TIME button and the

current day is announced (eg Sunday).

•Press and hold down the OGM button until

the correct day is announced.

•Finally press and release the TIME button

and your Response 115 will announce the

time and day that you have set.

If you need to change the time and day settings

repeat the above procedure.

Using your Response 115

answering machine

TIME

At each stage you have 10 seconds to enter your

choice (e.g. 3) before proceeding to the next stage.

PLAY

ANSWER

ON/OFF

REW

OGM

Table des matières

Autres manuels BT Téléphone

BT Contour 100 Manuel utilisateur

BT Diverse 6350 Manuel utilisateur

BT Duet 210 Manuel utilisateur

BT Essential Digital Home Phone Instructions d'installation

BT FeatureLine & Embark Manuel utilisateur

BT Synergy 700 Manuel utilisateur

BT Decor 2600 Manuel d'instructions

BT Hub Phone 2.1 Manuel utilisateur

BT Converse 225 Manuel utilisateur

BT DECOR 1500 Manuel utilisateur

BT FREELANCE XB2500 Manuel utilisateur

BT Converse 1200 Manuel utilisateur

BT CONVERSE 2025 Manuel utilisateur

BT PARAGON 500 Manuel utilisateur

BT Converse 2300 Manuel utilisateur

BT Graphite 2500 Manuel utilisateur

BT SYNERGY 4100 Manuel utilisateur

BT RESPONSE 125 Manuel utilisateur

BT Payphone Contour 400 Manuel utilisateur

BT DECOR 310 Manuel utilisateur

BT FREELANCE 501 Manuel utilisateur

BT EDGE 1500 Manuel utilisateur

BT Revelation Guide de l'utilisateur

BT Converse 325 Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur

Ericsson

Ericsson Dialog 3213 Manuel utilisateur