BST Solutions GmbH | FLAME DETECTOR KLC 20 / KLC 21 Page 6
1.6 Obligation of the operating company
The flame detektor KLC20 / KLC21 may cause hazards if it is operated inappropriately or in
an improper condition.
The operating company is under the obligation to operate the machine in proper state only.
The operating company has to secure hazardous areas that exist between BFI devices and
the customer‘s own equipment.
The operating company has to appoint and instruct responsible staff:
• Only deploy trained or instructed staff.
• Clearly set out the responsibilities of the staff with regard to operation, set-up, maintenan-
ce and repair.
• Regularly check that staff are safety conscious and aware of hazards and are observing the
operating instructions.
• Before starting work, staff who are assigned to work with/on the device have to have read
and understood the operating instructions, in particular the chapter on „Safety“, as well as
the relevant regulations.
• The operating manual and relevant regulations have to be stored in such a way that they are
accessible to operating and maintenance staff.
• Set out who will have responsibility for device operation and ensure that this person has
the authority to overrule any unsafe instructions of third parties.
1.7 Liability disclaimer
All technical information, data and guidance on device operation that are contained within
this operating manual are, to the best of our knowledge, correct at the time of printing, taking
into account our present understanding and experience.
We reserve the right to make technical changes with respect to the further development of
the flame detector outlined in this operating manual. No claims can be made based on the
specifications, illustrations and descriptions of this operating manual.
We shall not be liable for damage or operating malfunctions that result from operating errors,
inappropriate repairs or the non-observance of the operating manual. We expressly state that
only original spare parts and accessories approved by us may be used. This also applies to
the components of other manufacturers that have been used.
The installation or use of non-approved spare and accessory parts and any unauthorized
retrofits and modifications are not permitted for safety reasons and exclude any liability by
BST Solutions for consequential damages.
Generally valid legal and other binding regulations on accident prevention and envi-
ronmental protection have to be observed and instructed, in addition to the operating
instructions.
GENERAL ASPECTS
