Bryston SP4 Instructions de montage
Installer Guide
Date: 06/01/2018
Firmware: 3.3r1
1
Model identication
16ch Balanced
Dual Theater
Expansion
16ch Unbalanced
RCA
Expansion
Options slots usage
Optional Modules
9@XKuWvo@AW4
2
Welcome
Thank you for choosing a Bryston SP4
Immersive Sound Processor. This guide
provides step-by-step instructions for
setting up your SP4.
This guide will describe the setup of
the processor. The same process
applies to other variants with options installed.
Only the wiring and some elements of the
setup will dier.
We continuously strive to improve our products.
Some features might thus be added or be improved.
Make sure to check whether the installed rmware
version matches the installer guide version.
What’s In the Box
Installer Guide
Safety Instructions
SP4 Immersive
Sound Processor
Firmware 3.3r1
Power cord *
* depending on the region, the power
cord will be delivered with Fuse to be
installed
** tools are required to mount/unmount
the rack mount ears:
Torx screwdriver (T10)
Rack mount ears **
3
Before You Begin
1. In case the AC cord is delivered with Fuses attached, make sure to install them before
connecting the unit.
2. Ensure your electrical circuit has a good ground connection with all audio equipment
connected to the same ground node to avoid ground loop.
Display / Projector
XLR cables
RCA cables
Optical Toslink wire
HDMI Cable
Amplier units Speakers with cables LAN router
with Cat5/6 RJ45 cable *
3. Required equipment:
* the ISP needs a DHCP server to be part of the Network to get an IP address allocated.
Make sure to check your Internet Provider box or LAN/Switch box for router function.
4
We have divided the unit conguration into several key steps, as shown below:
Installation Flow
1AC, sources and displays connection to the SP4
2Power up, Web Installer Interface access and general description
3System conguration : password, access management and Network
4Inputs denition and conguration
5Theater and Audio Zones, creation and conguration
6
Settings of Triggers, AV delays, limiters, display
7
Denition of Listening Presets with Theater and Audio Zones allocation
8
Outputs mapping and connection to ampliers and subwoofers
9
Installation Monitoring StormMonitoringTM
10 Remote Control interfaces: Web Remote and SP4 RemoteTM
5
6
11
12
13
39
43
45
47
52
11
Room Calibration with Dirac Live®Room Calibration Tool 27
12 Connectors descriptions, inputs table 56
13 Specications and acknowledgements 58
Hardware Connections
AC, sources and displays
1
5
1
2
3
45
6
1. Check Fuse. To replace the Fuse, make sure to disconnect the AC cord from the ISP to avoid electric shock.
2. Connect AC cord to Power Outlet (do not turn ON now) using the earth connected cable delivered with the ISP.
3. Connect the RJ45 LAN Network cable to the router/switch
4. Connect appropriate Digital Sources via Coaxial or Optical
5. Connect appropriate Analog Sources via RCA
6. Connect your HDMI sources, all inputs support HDCP2.2
(By default, HDMI1.4 speeds on HDMI IN 1 to 4, HDMI2.0 speeds on HDMI IN 5 to 7)
7. Connect your displays (HDMI OUT 1 is HDCP1.4, HDMI OUT 2 is HDCP2.2, same content)
1.1) Connect the unit as shown below. Do not connect the outputs at this stage:
allocation is done automatically during speakers setup (Step 5 of this document).
1.2) Multiple connections are possible. Take note of your sources’ connections to the SP4
by using the table of part 12, where you can also nd connectors pinout.
7
8
1 6&72 3 4 5
Web Installer Interface
Access & Help
2Power Up IP Address Login Navigation Online Help
6
2.1) Power On the unit following below steps :
1. Turn the Main Switch to ON (I) on the back panel.
2. Display will show Bryston logo for few seconds and will
enter the Sleep Mode (Led turns red continuously).
3. When in Sleep Mode, press the Power Button. Unit will start.
1
23
Web Installer Interface
Access & Help
2Power Up IP Address Login Navigation
Online Help
Online Help
7
12
1
2.2) Check for Network Address :
1. Press EDIT button for about 3s
2. The display will show a list of system information, including the
IP address allocated via DHCP
3. Take note of this address:
eth IP Addr :
eth MAC Addr :
wifi IP Addr :
wifi MAC Addr :
Hostname :
192.168.1.172
b8:27:eb:70:2b:2c
None
None
bryston-sp4
serial number : sp4-N00006
temperature : 35 °C
FAN speed : 50%
fw version : 3.3r1
IP Address
In case you need to bring the unit back to its default DHCP mode from the front panel, follow above
Step 1, then press the EDIT button for a few seconds, until a message pops up asking for conrmation
of this action by using the ENTER button.
i
Web Installer Interface
Access & Help
2Power Up IP Address Login Navigation Online Help
8
2.3) Use your computer and open a Web Browser.
2.4) In the URL area, enter the IP address of your unit (such as 192.168.1.172 for example)
and validate.
2.5) The Home Page will be shown as below :
Selecting this button
will give access to
End User Remote
Control page (see 9)
Selecting this button
will give access to
the Expert Setup
to congure the SP4
Select the
Expert Setup
The Expert Setup has two levels
of access : Installer and Expert User.
Expert user gets access to portions
of the setup dened by the Installer.
Installer user gets full access to the setup.
Conguration is done at the Installer level.
Type the default password for Installer being:
installer
And press CONNECTION
Only one instance of Web Browser can be opened to access the unit. If a window is already in use
and another is opened to connect to the same unit, a message will ask you to close one.
!
Power Up IP Address Login Navigation Online Help
Web Installer Interface
Access & Help
2
9
Master Volume of the selected Theater
can be adjusted here. MUTE is available
as well as a DIM function that turns
the Volume down by an amount dened
in the Settings page (see part 7).
Conguration of the ISP is made in few
tabs split in the following categories:
- System parameters
- Inputs denition
- Speakers allocation and Room
Calibration for Mains and Alternate
outputs
- General settings
- Listening Presets
- Monitoring to visualize system status
Once congured you can control
the ISP via the Remote Page
In some cases, it might be
required to restart the ISP
by pressing the RESTART button.
Note that this will not erase the
stored settings.
Pressing LOG OUT will take you
back to HOME page with only
possible access to REMOTE control.
2.6) Select Expert User again. You will access the System Page of the SP4.
2.7) The Web Installer Interface is structured around a common part on the top area
that will remain accessible at all time and give access to the basic functions.
This area provides the means to
change some of the settings at anytime
without having to access the Remote
Control page. Can be changed: Source, Preset,
Theater (and related Proles) and Surround mode.
To help you understand all the functions and
settings of the product, an Online
Contextual Help is accessible. By turning it to ON,
question marks will pop up next to each
function. Simply click on it for the function you
need help on.
Autres manuels pour SP4
1
Table des matières
Manuels Équipement d'enregistrement populaires d'autres marques
Strymon
Strymon NIGHTSKY Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur
Tews Technologies
Tews Technologies TPMC465 Manuel utilisateur
Honeywell
Honeywell Excel 50 Manuel utilisateur
SeaLevel
SeaLevel COMM+8.LPCI Manuel utilisateur
Arturia
Arturia AUDIOFUSE STUDIO Manuel utilisateur
