Brunner I048145 Manuel utilisateur
Support frame for sus-
pended fireplaces
Assembly instructions
2 Assembly instructions Support frame for suspended fireplaces (1.0)© 2015 Brunner GmbH
CONTENTS
1 Delivery contents...........................................................4
2 Designation of components......................................... 6
3 Necessary tools:............................................................6
4 Sequence of assembly..................................................7
© 2015 Brunner GmbHAssembly instructions Support frame for suspended fireplaces (1.0) 3
4 Assembly instructions Support frame for suspended fireplaces (1.0)© 2015 Brunner GmbH
1 DELIVERY CONTENTS
Support frame assembly (art. no.: I048145)
Item Quan-
tity
Designation Part no.
1 1 Right girder assembly I048135
2 1 Left girder assembly I048138
3 2 Support frame connecting
rod assembly
I048141
3.1 1 Support frame distance
tube
I048137
3.2 1 M12 draw rod I048139
3.3 2 M12 washer 934
3.4 2 M12 hex locking nut 800419
4 4 M10x30 hex bolt 800420
5 4 M12x80 hex bolt 800421
6 2 M12 hex nut 800422
7 6 Washer 934
8 6 M12 hex locking nut 800419
9 2 Support frame connecting
rod assembly
I048165
9.1 1 M12 draw rod I048139
9.2 2 Support frame distance
tube
I048166
9.3 2 Washer 934
Illustr. 1: Delivery contents overview
(I048145)
X = Assembled only for transporta-
tion purposes
9.4 2 M12 hex locking nut 800419
Parts of suspended fireplace assembly (art. no.: I048167)
© 2015 Brunner GmbHAssembly instructions Support frame for suspended fireplaces (1.0) 5
Item Quan-
tity
Designation Part no.
1 1 Back plate assembly I048144
1.1 1 Back plate assembly I048157
1.2 4 M10x50 hex bolt 800399
1.3 8 M12 hex locking nut 800419
1.4 8 Washer 934
1.5 8 M12x80 hex bolt 800421
1.6 2 M10 threaded rod I048164
1.7 4 M10 hex nut 800454
1.8 1 Securing brace assembly I048171
1.9 1 M12x16 hex bolt 00933
2.2 1 Firetable support beam
assembly
I048155
3 8 Firetable hanging con-
soles
I048156
4 2 M12x80 hex bolt 800421
5 2 M12 hex nut 800422
6 2 Supporting bracket I048168
Illustr. 2: Delivery contents overview
(I048167)
7 2 M12x30 hex bolt
6 Assembly instructions Support frame for suspended fireplaces (1.0)© 2015 Brunner GmbH
2 DESIGNATION OF COMPONENTS
Illustr. 3: Presentation of assembled fire-
place
A = Top door frame/support
B = Bottom door frame
C = Firetable
D = Finished floor
E = Concrete floor
F = Back plate
G = Firetable support beam
H = Hanging console
I = Support frame
3 NECESSARY TOOLS:
- 1 wrench for hex bolts size no. 8
- 2 wrenches for hex bolts size no. 17
- 2 wrenches for hex bolts size no. 19
- 1 wrench for hex bolts size no. 22
- Hammer
- Punch
- Spirit level
© 2015 Brunner GmbHAssembly instructions Support frame for suspended fireplaces (1.0) 7
- 12 mm drill for steel (and a smaller drill for initial drilling)
- Power grinder
- Grinding and cutting disc for grinder
- Drilling machine
- Measuring rule
- Screw clamp
- Welding machine
- 4 anchor bolts M12 for support frame mounting to the floor
- Optional: anchors for support frame mounting to the back wall and a lifting
assembly for fireplace insert
4 SEQUENCE OF ASSEMBLY
1. Initial assembly of support frame I048140
Attach both connecting rods I048141 (horizontal
tubes) to the supports on the left and right side,
push the threaded rods through the tubes and af-
fix with M12 nuts and washers. Mount only the
two connecting rod assemblies first.
Illustr. 4: Support frame
with two connecting rods
8 Assembly instructions Support frame for suspended fireplaces (1.0)© 2015 Brunner GmbH
2. Insert the back plate
Illustr. 5: Back plate in position Illustr. 6: Move the back plate in
place
Remove the transport securing screws on the ends of the longer beams.
Insert the back plate onto both square profiles of the left and right girder.
Remove the 8 screws (see Illustr. 1 - 1.5) – if present.
3. Adjust the height of back plate
To adjust the height of back plate, mount the
hooks and the turnbuckles of the 'top door
frame' (delivery contents of every Panorama fire-
place) onto the M10 threaded rods (see Illustr. 2 -
1.6). Put the M12 threaded rod (from part no. 9 of
the support frame assembly) into the upper holes
of the girder and through the hooks. The height
of the back plate can be adjusted by turning the
turnbuckles.
Illustr. 7: Height adjust-
ment
© 2015 Brunner GmbHAssembly instructions Support frame for suspended fireplaces (1.0) 9
The necessary height from concrete floor to sup-
porting level (see H-Auflager below) depends
from the floor structure and the desired mount-
ing height of the door frame above the finished
floor. The picture shows the way of establishing
the height and the use of spirit level necessary
for horizontal mounting.
Illustr. 8: Establishing the
height of support
Establishing height for back plate support adjustment:
The distance of the door frame to the finished floor depends from the height
adjustment of the back plate.
10 Assembly instructions Support frame for suspended fireplaces (1.0)© 2015 Brunner GmbH
Illustr. 9: Support frame with back plate and suspended fireplace
H-Auflager = H-FFB + H-OK Blende -200mm
FFB = Finished
floor
H-FFB = Finished floor mounting height
RFB = Concrete
floor
H-Fuß
Soll
= Distance of feet to bottom of
fireplace
OK = Top level H-Au-
flager
= Distance of concrete floor to
supporting level
H-Oberkante Blende = Distance between FFB and door frame
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Brunner Cheminée intérieure
Brunner
Brunner BKH 5.0 flat 50-98 green Manuel utilisateur
Brunner
Brunner BKH Manuel utilisateur
Brunner
Brunner KSO Manuel utilisateur
Brunner
Brunner Panorama Manuel utilisateur
Brunner
Brunner BKH 5.0 flat 42-50 green Manuel utilisateur
Brunner
Brunner green BKH 5.0 50-98 Manuel utilisateur
Brunner
Brunner Iron dog 06 Manuel utilisateur
Brunner
Brunner BKH 5.0 flat 42-66 green Manuel utilisateur
Brunner
Brunner BKH 5.0 flat 50-82 green Manuel utilisateur
Brunner
Brunner green BKH 5.0 50-82 Manuel utilisateur
