Brother Swan Manuel utilisateur
90°
Before You Start 01 02 03
0504 06 07
0908 10 11
Orient the paper so that
the ☆on the template is
on the bottom corner of
the diamond. After that
turn the paper over.
Fold the paper in half
vertically and then unfold
it.
Fold the right side of the
paper towards the center
along the dotted line.
Fold the left side of the
paper towards the center
along the dotted line.
Turn the paper over. Fold the right side of the
paper towards the center
along the dotted line.
Fold the left side of the
paper towards the center
along the dotted line.
Fold the bottom of the
paper to the top along the
dotted line.
Fold the tip of the paper
down along the dotted
line.
Turn the paper over. Fold the paper in half
vertically along the dotted
line.
Rotate the paper about 90
degrees to the left.
Swan 1
/
2
Swan Folding Instructions
In cooperation with Origami.me
Complete12 13
Pull the paper up and out
in the direction of the
arrow. A new crease will
form along the dotted line.
Pull the paper up and out
in the direction of the
arrow. A new crease will
form along the dotted line.
The completed Swan.
Swan 2
/
2
Swan Folding Instructions
In cooperation with Origami.me
