Brother PEDESIGNNEXT Manuel utilisateur

Personal Embroidery Design

Software System

Installation Guide

Please read before use

Read the following before opening the

CD-ROM package

Thank you for purchasing this software. Before opening the CD-ROM package for this software, carefully read

the following Product Agreement, which has been provided for this product. Use this software only if you agree

to the terms of this agreement. By opening the CD-ROM package, you agree to the conditions of its use. This

product cannot be returned after it has been opened.

Product Agreement

Portions of this product were created using technology from Softfoundry International Pte. Ltd.

1) General terms

This is an agreement between you (the end-user) and our company for this product.

2) Use of this product

You may install and use this product on only one computer.

3) Limitations on duplications

You may not duplicate this product, except for backup purposes.

4) Limitations on modifications

You may not modify or disassemble this product in any way.

5) Limitations on transfer

This software may not be transferred to or used in any other way by a third party.

6) Warranty

We accept no responsibility for your choice or use of this product or for any damages that may arise

out of its use.

7) Others

This product is protected by copyright laws.

Before Use

Technical Support

Contact Technical Support if you have a problem. Please check the company web site

(http://www.brother.com/) to find the technical Support in your area. To view the FAQ and information for

software updates, visit the Brother Solutions Center at (http://solutions.brother.com/).

Online Registration

If you wish to be contacted about upgrades and provided with important information such as future product

developments and improvements, you can register your product online by following a simple registration

procedure.

Click Online Registration on the Help menu of Layout & Editing to start up the installed Web browser and

open the online registration page on our Web site.

http://www.brother.com/registration/

Uninstallation

1. Click the button in the task bar, and then click Control Panel.

2. In the Control Panel window, click Uninstall a program under Programs and Features.

3. In the Programs and Features window, select this software, and then click Uninstall.

aNote:

Before contacting web site:

1) Please have your Windows®Operating System updated to the most current version.

2) The make and model number of the computer that you are using as well as the Windows®

Operating System version.

3) Information about any error messages that appear.

This information will help expedite your questions more quickly.

bMemo:

Online registration may not be available in some areas.

bMemo:

• The uninstallation procedure is described for Windows Vista®.

• For Windows®2000, click Settings in the Start menu, and then click Control Panel. In the Control

Panel window that appeared, double-click Add/Remove Programs.

• For Windows®XP, click the Start button, then Control Panel. Double-click Add or Remove

Programs. Select this software, and then click Remove.

PE-DESIGN Ver.8.0 Installation Guide cover 2-3 K

Table of Contents

Table of Contents........................................................................................................................1

Before Use ...................................................................................................................................2

Introduction ................................................................................................................................................2

Package Contents ..................................................................................................................................2

Optional Supply ......................................................................................................................................3

Principal Parts ........................................................................................................................................3

Installation..................................................................................................................................................4

Please Read Before Installation.............................................................................................................4

Installation Procedure.............................................................................................................................4

System Requirements ............................................................................................................................5

[STEP1] Installing the Software..............................................................................................................6

[STEP2] Upgrading the USB Card Writer Module (For upgrade customer only)..................................10

Checking for the Latest Version of the Program...................................................................................12

Technical Support.................................................................................................................................13

Online Registration...............................................................................................................................13

Uninstallation........................................................................................................................................13

Before Use

Introduction

Package Contents

Check that the following items are included. If anything is missing or damaged, contact your authorized dealer

or Brother Customer Service.

■PE-DESIGN NEXT (full version):

■PE-DESIGN NEXT upgrade for PE-DESIGN version 5, 6, 7 or 8:

USB card writer module

CD-ROM

Contains the software

and Instruction Manual

(PDF format).

Original card Installation Guide Instruction Manual Positioning sheet

CD-ROM

Contains the software

and Instruction Manual

(PDF format).

Installation Guide Instruction Manual Positioning sheet

aNote:

The USB card writer module and the original card are not included in the kit provided for upgrading

from version 5, 6, 7 or 8.

Before Use

Optional Supply

Original card

Principal Parts

aLED indicator

This indicator lights up when the unit is turned on, and flashes when the USB card writer module is

communicating with the computer.

bCard slot

Insert an original card/embroidery card here.

cUSB connector

Connect to the computer.

aNote:

The only original cards that can be used with this USB card writer module are those like the one

enclosed or optional original cards of the same type.

bMemo:

Additional blank original cards can be purchased through an authorized dealer.

aNote:

Never remove an original card or unplug the USB cable while this indicator is flashing.

bMemo:

• Since power is supplied to the USB card writer module through the USB connection to the

computer, there is no power supply cable or power switch.

• Be sure to keep original cards away from high humidity, direct sunlight, static electricity and strong

shocks. Furthermore, do not bend the cards.

Before Use

Installation

Please Read Before Installation

●Before beginning the installation, check that the computer meets the system requirements.

●In order to install the software on Windows®Operating System, you must log on to the computer using an

account with administrator privileges. For details on logging on to the computer using an account with

administrator privileges, refer to the Windows manual.

●The installation procedure is described for Windows®7. The procedure and dialog boxes for other

operating systems may be slightly different.

●If the installation is canceled before it is completed or if the procedure is not performed as described, the

software will not be installed correctly.

●Do not remove the CD-ROM from the CD-ROM drive of the computer while the installation is being

performed. Remove the CD-ROM after the installation is completed.

●Before turning on the computer, be sure to disconnect the USB card writer module.

●In order to upgrade the USB card writer module, you must be able to connect to the Internet. If you cannot

connect to the Internet, contact your authorized dealer or Brother Customer Service.

●If the USB card writer module is not upgraded, it can only be used the limited number of times that the

software can be used. In order to upgrade the USB card writer module, be sure to perform STEP 2 on

page 10.

Installation Procedure

The installation procedure is different depending on whether the full version or an upgrade of the software is

being installed. Be sure to perform the installation procedures listed below.

■Installing PE-DESIGN NEXT (full version)

“[STEP1] Installing the Software” on page 6

■Upgrading from version 5, 6, 7 or 8

“[STEP1] Installing the Software” on page 6

“[STEP2] Upgrading the USB Card Writer Module (For upgrade customer only)” on page 10

Before Use

System Requirements

Before installing the software on your computer, make sure that the computer meets the following minimum

PC requirements.

Computer IBM-PC or compatible computer

Operating system Windows®XP, Windows Vista®, Windows®7 (32 or 64 bit)

Processor 1GHz or higher

Memory 512MB (1GB or more is recommended.)

Hard disk free space 300MB

Monitor XGA (1024 x 768), 16-bit color or higher

Port 1 available USB

Printer A graphic printer that is supported by your system

(if you wish to print your images)

CD-ROM drive Required for installation

Internet access Required for upgrade

aNote:

• Power is supplied to the USB card writer module through the USB connection. Connect the USB

card writer module to a USB connector on the computer or to a self-powered USB hub that can

supply enough power to the card writer module. If the card writer module is not connected in this

way, it may not operate correctly.

• This product may not operate correctly with some computers and USB expansion cards.

Before Use

[STEP1] Installing the Software

This section describes how to install the application software.

1. Insert the enclosed CD-ROM into the computer's CD-ROM drive.

■Windows®XP users only

→After a short while, the language selection dialog box for InstallShield Wizard automatically appears.

Continue with step 4. on page 8.

aNote:

• If the installation is interrupted or not performed as described, the software will not be installed

correctly.

• Before turning on the computer, be sure that the USB card writer module is DISCONNECTED.

• In order to install the software, you must log on to the computer using an account with administrator

privileges. If you are not logged on with the Administrator account, the password for the

Administrator account (Administrators) may be requested with Windows®7. Type in the password

to continue the procedure.

bMemo:

If the installer does not automatically start up:

1) Click the Start button.

2) Click Run.

→The Run dialog box appears.

3) Type in the full path to the installer, and then click OK to start up the installer.

For example: D:\setup.exe (where "D:" is the name of the CD-ROM drive)

Before Use

■For Windows®7 or Windows Vista®users:

→After a short while, the AutoPlay dialog box automatically appears.

2. Click Run setup.exe.

→The User Account Control dialog box appears.

3. Click Yes.

→After a short while, the following dialog box automatically appears.

bMemo:

This dialog box does not appear on Windows

XP. Continue with the next step.

bMemo:

If the

AutoPlay

Dialog does not automatically start up:

1) Click the Start button.

2) Click All Programs

Accessories

Run.

→The Run dialog box appears.

3) Type in the full path to the installer, and then click OK to start up the installer.

For example: D:\setup.exe (where “D:” is the name of the CD-ROM drive)

Before Use

4. Select the desired language, and then click OK.

→The InstallShield Wizard starts up, and the first dialog box appears.

5. Click Next to continue with the installation.

→A dialog box appears, allowing you to select the folder where the software will be installed.

6. Check the installation location, and then click Next.

→A dialog box appears, indicating that preparations for installation are finished.

bMemo:

• To install the application into a different folder:

1) Click Change.

2) In the Change Current Destination Folder dialog box that appeared, select the drive and folder.

(If necessary, type in the name of a new folder.)

3) Click OK.

→The Destination Folder dialog box of the InstallShield Wizard shows the selected folder.

4) Click Next to install the application into the selected folder.

Autres manuels pour PEDESIGNNEXT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Brother Logiciel

Brother

Brother Quattro 2 6700D Manuel utilisateur

Brother

Brother MacBroidery„ Embroidery Lettering Software for... Manuel utilisateur

Brother

Brother PE-DESIGN2.0 Manuel utilisateur

Brother

Brother DCP-130C Guide de sécurité

Brother

Brother BES Monogramming Suite Manuel utilisateur

Brother

Brother BES Lettering Manuel utilisateur

Brother

Brother BES-100E Instructions de fonctionnement

Brother

Brother ImageCenter ADS-2000 Manuel utilisateur

Brother

Brother 1960C - IntelliFAX Color Inkjet Guide de sécurité

Brother

Brother SV-100B Manuel utilisateur

Brother

Brother RuggedJet RJ-4030 Instructions de montage

Brother

Brother DCP 165C - Color Inkjet - All-in-One Manuel utilisateur

Brother

Brother DCP 165C - Color Inkjet - All-in-One Guide de démarrage rapide

Brother

Brother PEDESIGN 7.0 Manuel utilisateur

Brother

Brother PocketJet 6 Plus Print Engine Manuel utilisateur

Brother

Brother PEDESIGN PLUS Guide de configuration

Brother

Brother BES Monogramming Suite Manuel utilisateur

Brother

Brother BES Lettering Manuel utilisateur

Brother

Brother BES Monogramming Suite Manuel utilisateur

Brother

Brother DCP-8110DN Manuel utilisateur

Brother

Brother MFC-8460N Manuel utilisateur

Brother

Brother iPrint & Scan Guide Manuel utilisateur

Brother

Brother Print/Scan Manuel utilisateur

Brother

Brother BES Monogramming Suite Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur