Brother BAS-416 Manuel utilisateur

Autres manuels pour BAS-416

9

Ce manuel convient aux modèles suivants

21

Table des matières

Autres manuels Brother Machine à coudre

Brother

Brother BAS-311G Manuel utilisateur

Brother

Brother NX-450 Manuel utilisateur

Brother

Brother 888-P00 Manuel utilisateur

Brother

Brother LZ2-B852 Manuel utilisateur

Brother

Brother 884-T05 Manuel utilisateur

Brother

Brother 882-W20/W22 Manuel utilisateur

Brother

Brother BES-1240 Guide de référence

Brother

Brother LS-2220 Manuel utilisateur

Brother

Brother DB2-B773-003 Manuel utilisateur

Brother

Brother 885-403 Manuel utilisateur

Brother

Brother KE-436C Manuel utilisateur

Brother

Brother NX-400Q Manuel utilisateur

Brother

Brother S-7300A Manuel utilisateur

Brother

Brother BM2800 Manuel utilisateur

Brother

Brother S-6280A Manuel utilisateur

Brother

Brother PR-620C Manuel utilisateur

Brother

Brother S-7200B Manuel utilisateur

Brother

Brother PS100 Manuel utilisateur

Brother

Brother HE-800A Manuel utilisateur

Brother

Brother 888X64 Series Manuel utilisateur

Brother

Brother 083-8775 Manuel utilisateur

Brother

Brother KA-7100 Manuel utilisateur

Brother

Brother LS-1717 Manuel utilisateur

Brother

Brother BAS-411 Manuel utilisateur

Manuels Machine à coudre populaires d'autres marques

Riccar

Riccar RL634DE Manuel utilisateur

Singer

Singer 2517 Manuel utilisateur

Pfaff

Pfaff 3307-1 SERIES Manuel utilisateur

Janome

Janome Quilt Maker Pro 18 VERSA Manuel utilisateur

Siruba

Siruba C007JP Manuel utilisateur

Husqvarna Viking

Husqvarna Viking Designer SE Manuel utilisateur

Singer

Singer 148-5 Manuel utilisateur

IKEA

IKEA SY Manuel utilisateur

Pfaff

Pfaff 571 Manuel utilisateur

Singer

Singer 15-91 Manuel utilisateur

Pegasus

Pegasus WT100 Series Manuel utilisateur

Reliable

Reliable 7100DB Manuel utilisateur

Pfaff

Pfaff 937 Manuel utilisateur

Singer

Singer 6038 Manuel utilisateur

Singer

Singer 413K Manuel utilisateur

Pfaff

Pfaff 1471 E1 Manuel utilisateur

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuel utilisateur

HIGHLEAD

HIGHLEAD GC2008-M Manuel utilisateur

1

K

Kn

ni

if

fe

e

A

Ad

dj

ju

us

st

tm

me

en

nt

ts

s

–

–

A

Al

ll

l

M

Ma

ac

ch

hi

in

ne

es

s

For Technical Assistance Please Call Toll Free 1-877-4BROTHER

The first thing you want to check before you go through any adjustments is to see if the knives are

really out of position. You will need to remove the needle plate to look. They should look like the

photo below with the moving knife protruding out from the fixed knife about 1mm.

If you find that this is not the case with your machine than you will need to adjust the knives.

First you will want to check and adjust, if necessary, the fixed knife. The fixed knife should

be pushed all the to the back of the machine so that the screw that attaches it to the machine is

against the front of the slot in the fixed knife and the right hand side of the fixed knife is

against the positioning pin as illustrated by the picture below. If it is not then loosen the

attaching screw and make the necessary adjustments.

Moving Knife

Fixed Knife

1mm

Attaching Screw Slot

Positioning Pin

2

After you have checked and adjusted, if necessary, the fixed knife. Now we can check the

moving knife. The tip of the moving knife should protrude past the edge of the fixed knife

1 mm as illustrated by the photo below.

If you find the moving knife needs to be adjusted. You will need to remove the arm

cover by removing the 6 screws as indicated in the photo below.

1mm

Screws

3

If you find that the machine will still not cut the thread cleanly, you might want to add

two knife shims underneath the moving knife. If that doesn’t work then you will probably

need to change both of the knives.

Once you have the cover removed you will be able to access the adjustment screws for the

moving knife. Loosen the screws as indicated in the photo below and move the moving

knife with your fingers until you get it 1 mm from the edge of the fixed knife. Re-tighten

your adjustment screws and press the thread-trimming button on the machine and re-check

the adjustment. You may have to do this more than once to achieve the correct position.

Re-install the arm cover and the needle plate and your finished.

Moving Knife

Adjustment Screws