Brodit 511484 Manuel utilisateur

Product 511484

511484 Passive holder with tilt swivel Adjustable holder. Fits for devices with and without skin with the

following dimensions: Width: 75-89 mm, Thickness: 12-16 mm.

Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe,

comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm,

Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the

holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure

the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in

an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well

with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is

in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it

with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your

device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto

ProClip Mounting Platform.

EAN: 7320285114845

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder for your device: Loosen the screws on the front side of the holder, so the sides of the

holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in

place. Tighten the screws on the front side of the holder.

2.To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching

plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed

screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns

on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same

time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a

bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Table des matières

Autres manuels Brodit Accessoires automobiles

Brodit

Brodit 711027 Manuel utilisateur

Brodit

Brodit 736102 Manuel utilisateur

Brodit

Brodit ProClip 852129 Manuel utilisateur

Brodit

Brodit ProClip 852057 Manuel utilisateur

Brodit

Brodit 727002 Manuel utilisateur

Brodit

Brodit Getac T800 Manuel utilisateur

Brodit

Brodit ProClip 854570 Manuel utilisateur

Brodit

Brodit 841488 Manuel utilisateur

Brodit

Brodit 804741 ProClip Manuel utilisateur

Brodit

Brodit ProClip 854399 Manuel utilisateur

Brodit

Brodit ProClip 852426 Manuel utilisateur

Brodit

Brodit ProClip 853804 Manuel utilisateur

Brodit

Brodit Mobile Phones Manuel utilisateur

Brodit

Brodit 541861 Manuel utilisateur

Brodit

Brodit Passive Holder Manuel utilisateur

Brodit

Brodit ProClip 804816 Manuel utilisateur

Brodit

Brodit 272011 Manuel utilisateur

Brodit

Brodit 213549 Manuel utilisateur

Brodit

Brodit Heavy Duty ProClip Manuel utilisateur

Brodit

Brodit 713049 Manuel utilisateur

Brodit

Brodit ProClip 855038 Manuel utilisateur

Brodit

Brodit 213460 Manuel utilisateur

Brodit

Brodit 521662 Manuel utilisateur

Brodit

Brodit ProClip 854702 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur