Broadata LBS-3232 Manuel utilisateur
LBS-3232
LINK BRIDGE
TM
UNIVERSAL
32X32OPTICAL/DVI/HDMI
MATRIX SWITCH
BCI reserves the right to make changes to the products described herein without
prior notice or consent. No liability is assumed as a result of their use or
application. All rights reserved.
©2013 Broadata Communications, Inc.
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
SAFETYINSTRUCTIONSAND COMPLIANCEDECLARATIONS
PLEASE OBSERVETHE FOLLOWING SAFETY PRECAUTIONSAS OUR
PRODUCTS CONTAIN
CLASS I LASER PRODUCTS
WARNING
Thisproductis a CLASS ILASERPRODUCT onlywhentheunits areconnected
with a fiber optical cable. Do not disconnect the fiber optic connector while
the unit is powered up. Exposure to laser radiation is possible when the
laser fiber optic connector is disconnected while the unit is powered up. It
should be noted that when the fiber is disconnected, the product will have
CLASSIM INVISIBLELASERRADIATION.
Although the fiber optic connectors in this product emit only Class 1 energy
that is below the levels considered to be hazardous, one should never stare
directly into a fiber optic connector or an unconnected fiber end unless one
can be certain that no exposure to laser energy could occur.
CAUTION
Only service personnel are intended to access the interior of the units. It
should be cautioned that CLASS 3 INVISIBLE LASER RADIATION WHEN
OPEN, AVOID EXPOSURE TO THE BEAM. The use of controls, making
adjustments, or performing operations other than those specified may result
in hazardous radiation exposure. This product has operating wavelengths
at 778nm, 800nm with average -0.5dB to 0dBm optical power per wavelength,
825nm, 911nm, and 980nm. The laser is operated in pulse mode within 1
KHz frequency and ¼ duty cycle.
The following label or equivalent is located on the surface of laser products.
This label indicates that the product is classified as a CLASS 1 LASER
PRODUCT.
SURGEPROTECTIONDEVICERECOMMENDED
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lightning strikes, etc. Use of
surge protection systems is highly recommended in order to protect and
extend the life of your equipment.
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, (800) 214-0222
4
TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION .............................................5
2.0 OPERATION CONTROLS AND FUNCTIONS ...............6
2.1 FRONT PANEL ...............................................................6
2.2 REAR PANEL ..................................................................8
3.0 SWITCH CONTROL ........................................................9
3.1 RS-232 PIN ASSIGNMENT.............................................9
3.2 RS-232 AND TELNET COMMANDS............................10
3.3 TELNET CONTROL.....................................................11
3.4 WEB GUI CONTROL....................................................13
4.0 SPECIFICATIONS..........................................................15
5.0 SERVICE PROCEDURE ...............................................17
5.1 REPLACEMENT POLICY .............................................17
5.2 RETURN AND REPAIR SERVICE .................................17
6.0 LIMITED WARRANTY....................................................18
7.0 APPENDIX .....................................................................19
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
1.0 PRODUCT DESCRIPTION
The LBS Series is a high performance Link BridgeTM Universal Matrix
Switcher System that provides up to 32x32 video switching for HDMI/
DVI signals. It supports 12-bit deep color resolutions up to 1080p and
1920x1200@60Hzwithmulti-channeldigitalaudio,suchasLPCM7.1CH,
DolbyTrueHD,DolbyDigitalPlusandDTS-HD.Standardversionsof the
LBS support all optical switching, or hybrid optical/electrical switching,
for HDMI/DVI signals. When configured for optical switching, only one
fiberisrequired perinputor outputport. Inaddition,the distancebetween
the switch and HDMI/DVI devices can be up to 400m when connected
byfiber cable. TheI/Oports in theLBS can be configuredin multiples of
8, thus supporting 8x8, 8x16, 24x16, up to 32x32 matrix size. The LBS
comes in a 5-RU packaging design, and has option for single or dual
powersupply.
TheLBS supportsjitter-free, high-qualityHDMI/DVI Displaywith several
EDIDfunctionsforindependentdisplayresolution atper-portbasis.Types
of switching control available: manual control panel, standard
RS-232, or Ethernet Web GUI andTelnet control.
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, (800) 214-0222
6
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1LOCK LED: This LED will illuminate when the on-panel key
functions is set to lock.
2POWER LED: This red LED will illuminate when the device is
settostandbymode, whenitisflashing itmeansthetemperature
inside is too high and air circulation is highly suggested.
3LCD: Displaysthesetting informationofeachinputandoutput
and other setting information according to the selection.
4POWER: Press this button to turn on the device or to set it to
standbymode.
5UNDO: Press this button to return back/exit the current
selection.
6PAGE UP, PAGE DOWN,
,
: Use these buttons to flip the
LCD’spagefordisplaying thecurrentI/Ostatusorwhenentering
into the menu for detail selection.
3
5
12
4
7
6
810 9
11
12
13
14
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
7CONFIG: Pressthis button to enter intothe menu selections of
A. EDIDSetting
StandardEDID:Usethebuilt-in EDID whichsupportsvideo
upto1080p@60/WUXGA@60Hz.
Auto EDID: based on the TV/Display’s EDID
of the lowest connected output port.
ManualEDID: Support independentEDID by assigningthe
selected input port to the selected output port.
B. IPConfiguration
1. IP address,
2. Netmask,
3. Gateway.
C. Temperature
T1,T2:thesefiguresshowsthetemperatureinsidethedevice.
D. LCD Contrast Range from 1~4
8ALL: Press this button to select all outputs to one input.
90~9: Pressthese numbers whenselectinginput output ports.
10 IN/OUT: Press this button to select input source to display on
outputdisplay. Thesequenceshouldbe IN/OUT-numberofinput
source-IN/OUT-number of output display-Enter. (This button
worksonly under In/Out function)
11 LOCK: Press this button to lock all the function buttons on
panel. To unlock, press and hold lock button for 4 seconds.
12 SAVE: Press this button to save the present setting of the I/O.
Thereare10 pre-setsavailablefor saving.
13 RECALL:Pressthis buttontorecall fromthesaving settingsof
1~10.
14 ENTER: Press this button every time to confirm the setting or
the selection.
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, (800) 214-0222
8
2.2 Rear Panel
1OUTPUT 1~32: ConnectHD/3DdisplayTV/monitor with HDMI
cables up to 32 displays.
2CPU
a. USB:This port is reserved for firmwareupdate
only.
b. IRIN: Reserved.
c. ETHERNET: Connect to an active network line for LAN
andTelnet/WebGUIcontrol.
d. RS-232:Connect with D-Sub9-pin cable from the
PC/Controldevice forRS-232 controlover theLBS-3232.
3INPUT 1~32: Connectsource equipment such as Blu-ray/PS3
players up to 32 devices with HDMI/optical cable.
4POWER & POWER Supply: The device will automatically be
placedonstand-by mode whenthe powersupply is connected
toAC power.
5Ventilation Fan: This fan will automatically turn on when the
device is switched ON. Do not block this port of the device or
cover it with any object. Please allow adequate space around
the unit for air circulation.
45
1
2
3
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
3.0 SWITCH CONTROL
3.1 RS-232 Pin Assignment
DefaultPortSettings
BaudRate: 19.2K
Data Bits: 8
Parity Bits: None
Stop Bits 1
FlowControl: None
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
TxD
RxD
NC
GND
NC
NC
NC
NC
LBS-3232
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
RxD
TxD
NC
GND
NC
NC
NC
NC
Remote Controller
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, (800) 214-0222
10
3.2 RS-232 and Telnet Commands
Refer toAppendixAfor full list of commands.
BCI LBS-32x32 User’s Manual
Link BridgeTM Universal 32x32 Optical/DVI/HDMI Matrix Switch
3.3 Telnet Control
Before attempting to use thetelnet control, please ensure that
boththeMatrix(viathe‘LAN/CONTROL’port)andthePC/Laptop
are connected to theactive networks.
Note:Pleasedonotconnectboththe MatrixandthePC/Laptop
with a single CAT5e/6 cable together as it will not access the
telnet function.
To access the telnet control in Windows 7, click on the ‘Start’
menu and type “cmd” in the Search field then press enter.
Under Windows XP go to the ‘Start’ menu and click on “Run”,
type “cmd” with then press enter.
UnderMac OS X,goto Go-Applications-Utilities-Terminal. See
belowforreference.
Table des matières
Autres manuels Broadata Commutateur matriciel
