Brita RF-103 Manuel utilisateur

Version 1.0E

RF-103

Installation

Instructions

Step 1

Step 2

Step 3

As Easy As...

REFRIGERATOR

Inline

Extended Life

Refrigerator/

Icemaker Filter

Connects To Incoming

Water Line

Front View Back View

System Tested and Certied by NSF

International against NSF/ANSI 42 and 372

for the reduction of the claims specied on

the Performance Data Sheet.

Inline Extended Life Refrigerator/Icemaker

Filter Model RF-103

Tools & Materials Required

Inline Extended Life

Refrigerator/Icemaker

Filter

main:

tools needed for installation

hacksaw

pipe cutter (for copper

pipe installation)

shut o valve

saddle top valve with

shut o

1/4" plastic tubing

package contents

optional items

utility knife

tape measure

safety glasses

ﬁlter and ﬁttings

bucket

Filter Model No. Date Purchased / Date to Replace For FREE Filter Replacement

Reminder, go to

www.protectplus.com

My BritaUniversal Filtration System (Replace ﬁlter every 5 years)

Internet & Mobile866.709.2086 Free Installation Video

Manufactured for: Protect Plus, LLC 420 3rd Avenue NW, Hickory, NC 28601 USA

ﬁtting

1/4" Adapter Fittings

1 2 3

30’

RF-103 installation instructions Version 1.0E

Before You Begin

WARNING: Be sure that all electrical appliances and outlets are turned o at the circuit breaker before installing with this ﬁlter.

WARNING

Operation / Maintenance Data

These units are intended for non-commercial use. They should be used only in ambient air temperature of between 40 degrees F /

4.4 degrees C and 100 degrees F / 37.7 degrees C. Placement of these units in direct sunlight or use of electrical heating equipment

on these units must be avoided. Replace ﬁlter cartridge when and as directed in the installation /operation instructions included with

each cartridge. Replacement ﬁlter cartridges are available at retail outlets.

• These ﬁlters are not water puriﬁers. Do not use with water that is microbiologically unsafe or of unknown quality without

adequate disinfection before or after the system.

• This unit is not designed to ﬁlter sulfur odor (rotten egg odor) caused by hydrogen sulﬁde. Use of carbon ﬁlters to treat sulfur odor

may intensify taste/odor problems.

• Please comply with all state and local regulations regarding the installation of water treatment devices.

• The contaminants or other substances reduced by the water ﬁlter device are not necessarily in your water.

Filtration Facts

Please read all instructions, speciﬁcations, and precautions before

installing and using your water ﬁlter system.

NOTICE

Precautions: for cold water use only.

Before installation be sure there is enough slack in the tubing to move refrigerator out for cleaning under refrigerator.

Consult your local plumbing codes and install accordingly.

This ﬁlter must be protected from freezing, which can cause cracking of the ﬁlter and water leakage.

Because of the product’s limited service life and to prevent costly repairs or possible water damage, we strongly recommend that

the ﬁlter be replaced every 5 years. If the ﬁlter has been in use for longer than this period, it should be replaced immediately.

DANGER: EXPLOSIVE FIRE HAZARD. If your refrigerator is gas powered, double check to determine which lines are gas lines and

which are water lines.

DANGER

Helpful Hints

Step 1 Shut o water

Attach inbound water

line to ﬁlter

Step 2

Install ﬁlter and test for

leaks

Step 3

As Easy As...

• Locate the water line to your

refrigerator.

• Observe if it is a ﬂexible hose or a rigid.

• Rigid pipes may require cutting.

• Determine if you have all appropriate

fasteners and adapters to ﬁt your

plumbing.

• Consult your local plumbing codes

and install accordingly.

• Be sure to unplug appliance before

working on refrigerator.

• If refrigerator is gas powered double

check lines leading into the refrigerator.

Before You Start WARNING

!DANGER

For water lines larger than 1/4" OD or made

from galvanized pipe additional plumbing

hardware will be required. Please visit the

local hardware store for these ﬁttings or call

customer service for assistance.

To Refrigerator

Supply line to Water Source

Flow

Quick Connect Fitting

Collet

Flexible hose

with nut

Adapter Fitting

For Flexible Hose with Nut

For Optional 1/4" Install

RF-103 installation instructions Version 1.0E

• Shut o the water supply to the

refrigerator and shut o the

icemaker if applicable.

• Have a container handy to catch any

water that leaks during installation.

• Turn o water supply to the

refrigerator and dispense the water

from the refrigerator door until water

ﬂow stops.

• This releases pressure from the

pipes before installation.

Step 1 Shut O Water

WARNING

• Make sure the direction of water ﬂow

through the ﬁlter is correct.

• Tighten each nut while using a second

wrench to hold the corresponding hex

ﬁtting.

Supply line to

Water Source

bucket

DANGER

materials and tools needed

1 2 3

30’

tape measure utility knife

Step 2 Attach inbound

water line to ﬁlter

Step 2 continued on next page >>

materials and tools needed

To Refrigerator

bucket

safety glasses

• Install the appliance side of the water line into the ﬁtting.

• Follow the same procedure as used for the supply side of the ﬁlter.

• Turn on the water supply.

• Check for leaks.

Note: If leaks continue, turn o the water supply and call Customer Service or your local plumber.

Supply line to

Refrigerator Source

• Turn on the water supply and ﬂush

the ﬁlter into a container for ten

minutes.

• This ﬂush will remove the air from

the ﬁlter and the small carbon

particles. During the ﬂushing

process, the water will turn dark in

color. Continue ﬂushing the new

ﬁlter until the water runs clear.

• Turn o the water supply.

• Warning: DO NOT screw system head

directly to refrigerator.

• Water supply to the refrigerator should

have a separate shut o valve installed

before the ﬁlter.

bucket

WARNING

Step 2

Attach inbound

water line to ﬁlter

Step 3

Install ﬁlter and test

for leaks

<< Step continued from previous page

materials and tools needed

WARNING

RF-103 installation instructions Version 1.0E

• Filter should be replaced every 5 years

(or sooner if pressure drop occurs).

• Do not use with water that is

microbiologically unsafe or of unknown

quality without adequate disinfection

before or after the system.

• Check ﬁlter every six months for leaks.

• Filter life and/or capacity is dependent upon

ﬁlter system, water quality and amount of

water ﬁltered.

Filter Replacement

(every 5 years)

Performance

Data and

Maintenance

Brita®Filter RF-103

The Brita® Inline Icemaker ﬁlter used with this ﬁlter

system has a limited service life. Changes in taste,

odor, and/or ﬂow of the water being ﬁltered indicate

that the ﬁlter should be replaced.

Expected life of this ﬁlter is 5 years. Filter may need

to be changed sooner due to sediment in your water

source. For product information and assistance call

828-449-1040.

Need Help? 1-866-709-2086

Be sure to turn o the cold water supply until leak issue is resolved.

Installation Requirements

Operating Pressure: 30-100 PSI (207-690 kPa)

Temperature Range: 40-100°F (4.4-37.7° C)

Flow Rate: 0.5 GPM ( 1.9 lpm)

•

Make sure the ﬂow direction is

correct.

• Disconnect adapter ﬁtting by

pushing the collet inward and

pulling the ﬁtting out.

• Remove the adapter ﬁtting from the

ﬁlter and discard. (See diagram).

• Cut the end of the tubing squarely.

Check the end of the tube to make

sure it is smooth with no ridges or

nicks. If needed cut the tubing again.

• Push tubing through the collet and

all the way into ﬁtting. The length

of the tubing should extend 11/16”

into the ﬁtting.

• Check for leaks.

Option

Optional Install for

¼” Plastic or

Copper tubing

do not bend or crimp

cut squarely on both ends

do not cut at an angle

wet ends of tubing before inserting

RF-103 installation instructions Version 1.0E

Instrucciones

de instalación

del RF-103

Refrigerador

En Linea Filtro

de nevera/

máquina de

hacer hielo

extendido

la vida

Paso 1

Paso 2

Paso 3

Tan fácil como...

Se conecta a la línea de

entrada de agua

vista frontal vista posterior

Sistema comprobado y certicado por NSF

Internacional contra NSF/ANSI 42 y 372 para la

reducción de los reclamos especicados en la

hoja de datos de rendimiento.

En Linea Filtro de nevera/ máquina de hacer hielo

extendido la vida Modelo RF-103

En Linea Filtro de

nevera/ máquina de

hacer hielo extendido

la vida

Principal:

Implementos necesarios para la instalación

Contenido del

paquete

artículos opcionales

bucket

cubo

Sistema de ﬁltración universal My Brita® (reemplace el ﬁltro cada 5 años)

866.709.2086

Información del producto y servicio www.protectplus.com www.protectplus.com

Video de instalación gratuito

Internet y móvil

Número de modelo del ﬁltro Fecha de compra / Fecha de cambio Para recordatorios GRATIS de

cambio del ﬁltro, ingrese a

www.protectplus.com

Implementos y materiales

necesarios

Filtro y acoplamiento adaptador

Fabricado por: Protect Plus, LLC 420 3rd Avenue NW, Hickory, NC 28601 USA

Cuchilla

multiuso

1 2 3

30’

Cinta para

medir

Gafas de

seguridad

segueta

cortador de tubos (para

instalación de tubos de cobre)

válvula de cierre

válvula de montura superior

con cierra

tuberia plástica de 1/4"

adaptador

Acoplamiento

adaptador de 1/4"

Table des matières

Langues :

Autres manuels Brita Système de filtration d'eau

Brita

Brita Redi-Twist USS-334 Manuel utilisateur

Brita

Brita PURITY 450 Quell ST Manuel utilisateur

Brita

Brita Purity C Series Manuel utilisateur

Brita

Brita Active Manuel utilisateur

Brita

Brita SAFF-100 Manuel utilisateur

Brita

Brita Filter Change Indicator Manuel utilisateur

Brita

Brita On tap Manuel utilisateur

Brita

Brita Memo Manuel utilisateur

Brita

Brita Maxtra+ Manuel utilisateur

Brita

Brita FF-100 Manuel utilisateur

Brita

Brita PURITY Finest 600 Mode d’emploi

Brita

Brita Maxtra+ Manuel utilisateur

Brita

Brita Carafe Manuel utilisateur

Brita

Brita PURITY C iQ Manuel utilisateur

Brita

Brita Maxtra+ Manuel utilisateur

Brita

Brita C150KIT-FINEST Manuel utilisateur

Brita

Brita PURITY C iQ Manuel utilisateur

Brita

Brita PURITY 1200 Clean Extra Mode d’emploi

Brita

Brita SAFF-100 Manuel utilisateur

Brita

Brita PROGUARD Gastronomy 200 Manuel utilisateur

Brita

Brita TOTAL 360 BRDROS Manuel utilisateur

Brita

Brita MAXTRA PRO Manuel utilisateur

Brita

Brita intenza Manuel utilisateur

Brita

Brita Fill & Enjoy Fun Manuel utilisateur

Manuels Système de filtration d'eau populaires d'autres marques

Wisy

Wisy LineAir 100 Manuel utilisateur

Schaffner

Schaffner Ecosine FN3446 Series Manuel d'utilisation

Pentair

Pentair FLECK 4600 SXT Guide de l'utilisateur

H2O International

H2O International H20-500 Manuel utilisateur

Renkforce

Renkforce 2306241 Manuel utilisateur

Neo-Pure

Neo-Pure TL3-A502 Manuel utilisateur

FLTR

FLTR OBF Manuel utilisateur

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manuel utilisateur

Applied Membranes

Applied Membranes W-G844EM Manuel utilisateur

BEGA

BEGA 116 Manuel utilisateur

WATA

WATA Standard Manuel utilisateur

Price

Price FFU series Manuel

Gaggenau

Gaggenau BRITA INTENZA 467873 Manuel utilisateur

HEISSNER

HEISSNER FPU24000-00 Manuel utilisateur

BGS technic

BGS technic 1518 Manuel utilisateur

Reverse Osmosis

Reverse Osmosis RF Series Manuel utilisateur

ubbink

ubbink Filtramax Series Manuel utilisateur

Renfert

Renfert 2940-0000 Manuel utilisateur